Abubuwan da ke ciki boye
1 AcraDyne GenIV Mai Kula da Layin Layin PI
2 Umarnin Amfani da samfur
3 Gabatarwa
4 Ana saita Mai Gudanarwa
5 PI Line Control Run Screen
6 Gudun Gumakan allo
7 Tuntuɓar
8 FAQ
9 Takardu / Albarkatu
9.1 Magana

AcraDyne-logo

AcraDyne GenIV Mai Kula da Layin Layin PI

AcraDyne-GenIV-Mai sarrafa-kan-PI-Line-Control-Network-samfurin

Ƙayyadaddun bayanai:

  • Samfurin: Gen IV Controller
  • Taimako: PI Line Control Protocol
  • Sadarwa: RS-232 Serial Connection

Umarnin Amfani da samfur

Gabatarwa

Iyalin Gen IV na masu sarrafawa suna goyan bayan ka'idar sarrafa layin PI. Ana yin sadarwa tare da sarrafa layin PI ta hanyar haɗin kai (RS-232). Wannan daftarin aiki yana bayyana tsari da halayen mai sarrafawa yayin da aka haɗa shi da tsarin kula da layin PI.

Ana saita Mai Gudanarwa

  • Serial Port: Tsarin kula da layin PI yana sadarwa tare da mai sarrafawa ta hanyar daidaitaccen tashar tashar jiragen ruwa. Mai kula da Gen IV yana buƙatar daidaita shi daidai da mai kula da layin PI.
  • Abubuwan Gano Barcode: Lokacin da sashin ya shiga tashar aiki, kula da layin PI yana aika umarnin aiki zuwa mai sarrafa karfin wuta. Wannan umarnin aikin ya ƙunshi bayanai kamar jerin taro, VIN, da ID na kayan aiki. Ana iya adana waɗannan a cikin ID ɗin lambar lambar su don nunawa da adanawa tare da kowane sakamako mai ɗaurewa.
  • AYYUKAN: Ba a ba da shawarar yin amfani da JOBS don masu sarrafawa a cikin yanayin Kula da Layin PI ba.

PI Line Control Run Screen

Da zarar an saita yanayin tashar tashar jiragen ruwa zuwa Sarrafa Layin PI, sabon allon gudu zai kasance yana nuna VIN, jerin taro, ID na kayan aiki, matsayin haɗin kai, maɓallin sake saiti, adadin abubuwan da suka rage, PSet(s) tare da sakamako mai ɗaurewa, nunin jeri na yanzu, da zaɓin yanayin jagora / mai nuni.

  • VIN, Jerin Taro, da ID na Kayan aiki: Maganganun matsayi akan duk allon gudu zai ƙunshi bayanin sashi daga tsarin sarrafa PI.
  • Halin Haɗi: Ana nuna halin haɗin kai ta gumaka don Haɗawa da An cire haɗin. Ana iya danna alamar halin da aka cire don sake saita sadarwa.
  • Ragowar Fasteners: Yana Nuna adadin maɗaukaki da suka rage na ɓangaren da ke cikin tashar aiki. Ana kashe kayan aiki lokacin da ya kai sifili.
  • PSet(s) tare da Sakamako: Yana nuna sakamako yayin da aka kammala abubuwan ɗaure don jeri na yanzu.
  • Mai Nuna Jeri na Yanzu: Yana nuna jerin halin yanzu tare da kibiya mai matsar da jerin abubuwan PSets yayin da aka kammala abubuwan ɗaure. Ana cire mai nuna alama bayan Sanarwa na Kammala Aikin Al'ada ko Sanarwa na Ƙarshen Aikin Tilas.

Gabatarwa

Iyalin Gen IV na masu kula da cikakken goyan bayan ka'idar kula da layin PI. Ana yin sadarwa tare da sarrafa layin PI ta hanyar haɗin kai (RS-232). Wannan daftarin aiki yana bayyana tsari da halayen mai sarrafawa yayin da aka haɗa shi da tsarin kula da layin PI.

Ana saita Mai Gudanarwa

Serial Port

Tsarin kula da layin PI yana sadarwa tare da mai sarrafawa ta hanyar daidaitaccen tashar tashar jiragen ruwa. Ana buƙatar daidaita mai sarrafa Gen IV daidai da mai kula da layin PI.

  • Serial "Port Mode" a saita zuwa "PI Line Control"
  • Serial tashar jiragen ruwa "Baud" saita zuwa 9600
  • Serial tashar jiragen ruwa "Data Bits" saita zuwa 8
  • Serial port "Stop Bits" an saita zuwa 1
  • Serial tashar jiragen ruwa "Parity" saita zuwa "Odd"

AcraDyne-GenIV-Mai kula-kan-PI-Layin-Control-Network-fig-1

Masu Gano Barcode

Lokacin da sashin ya shiga tashar aiki, kula da layin PI yana aika umarnin aiki zuwa mai sarrafa juzu'i. Wannan umarnin aikin ya ƙunshi bayanai masu zuwa.

  • Lambar jerin lambobi 5
  • VIN mai lamba 20
  • ID na kayan aiki mai lamba 4
  • Jeri na saitin sigina waɗanda za a yi amfani da su a ɓangaren tashar.

Saboda jerin taron, VIN da ID na Kayan aiki suna da tsayi daban-daban duk ana iya adana su a cikin ID ɗin lambar su. Wannan yana ba da damar bayanin bayanin akan allon gudu kuma a adana shi tare da kowane sakamako mai ɗaurewa.
Haɓaka abin rufe fuska guda uku a cikin saitin lambar lamba don ɗaukar tsayi daban-daban zai rarraba kowanne zuwa mai ganowa na musamman.AcraDyne-GenIV-Mai kula-kan-PI-Layin-Control-Network-fig-2

AYUBA

  • Ba a ba da shawarar yin amfani da JOBS don masu sarrafawa da aka yi amfani da su a cikin yanayin Kula da Layin PI.

PI Line Control Run Screen

Da zarar an saita yanayin tashar tashar jiragen ruwa zuwa "PI Line Control" sabon allon gudu zai kasance.

AcraDyne-GenIV-Mai kula-kan-PI-Layin-Control-Network-fig-3

Jerin Taro na VIN da ID na Kayan aiki

  • ID ɗin da ke cikin taken matsayi na duk allon gudu zai ƙunshi bayanin ɓangaren daga tsarin sarrafa PI.

Matsayin haɗi

Halin haɗin yana nuna ɗaya daga cikin gumaka biyu.

  • AcraDyne-GenIV-Mai kula-kan-PI-Layin-Control-Network-fig-4An haɗa
  • AcraDyne-GenIV-Mai kula-kan-PI-Layin-Control-Network-fig-5An cire haɗin. Lokacin da aka cire haɗin za a iya danna alamar matsayi don sake saita sadarwar.

Ragowar Fasteners

  • Yawan fasteners da suka rage na ɓangaren da ke cikin tashar aiki a halin yanzu.
  • Yana farawa da adadin PSets da za a gudanar da raguwa ta ɗaya don kowane ɗauri mai karɓuwa. Lokacin da ya buga sifili kayan aikin yana kashe.

PSet(s) tare da Sakamako

  • Yayin da aka kammala abubuwan ɗaure, ana nuna sakamakon don jerin na yanzu.

Mai nuna Jeri na Yanzu

  • Ana nuna jerin halin yanzu tare da kibiya. Kamar yadda aka kammala abubuwan haɗin gwiwa mai nuna alama zai motsa ƙasa da jerin PSets.
  • Da zarar iko na PI ya aika "Sanarwar Kammala Aikin Al'ada" ko "Sanarwar Kammala Aikin Tilasta" an cire alamar.

Yanayin Manual

Ana amfani da yanayin da hannu don kunna kayan aikin gwaji. Shigar da yanayin jagora zai ba da damar kayan aiki, share PSet da jerin sakamako. Hakanan zai share ID ɗin (wannan zai haifar da adana sakamako mai sauri ba tare da bayanin abin hawa ba). Ba za a nuna ɗorawa da aka yi a yanayin jagora akan wannan allon gudu ba amma ana iya lura da shi akan wasu allo. Ana ba da izinin yanayin hannu kawai lokacin da ba a aiwatar da sashi ba. Idan an karɓi sabon umarnin aiki daga tsarin kula da PI, an soke yanayin jagora.

Gudun Gumakan allo

Yayin gudanar da mai sarrafawa akan tsarin kula da layin PI kayan aiki za a iya kashe shi don dalilai da yawa. Duk lokacin da aka kashe gunkin allon gudu da nunin LED zasu ba da dalilin.

Gudun Ikon Tsayawa Allon LED nuni Dalili
AcraDyne-GenIV-Mai kula-kan-PI-Layin-Control-Network-fig-6 "BADA" An kammala lissafin PSets daga sarrafa PI
AcraDyne-GenIV-Mai kula-kan-PI-Layin-Control-Network-fig-7 "PI" Akwai kuskuren sadarwa zuwa tsarin kula da layin PI.
AcraDyne-GenIV-Mai kula-kan-PI-Layin-Control-Network-fig-8 "PSET" PSet mai aiki bai dace da PSet ɗin da tsarin kula da layin PI ya aika ba. Wannan na iya faruwa idan an canza lambar PSet sabanin sarrafa layin PI.

Tuntuɓar

FAQ

  • Q: Zan iya amfani da JOBS tare da masu sarrafawa a cikin yanayin Kula da Layin PI?
    • A: Ba a ba da shawarar yin amfani da JOBS don masu sarrafawa a cikin yanayin Kula da Layin PI ba.

Takardu / Albarkatu

AcraDyne GenIV Mai Kula da Layin Layin PI [pdf] Littafin Mai shi
Mai Sarrafa GenIV akan Cibiyar Kula da Layin Layin PI, GenIV, Mai Gudanarwa akan Cibiyar Kula da Layin Layin PI, Cibiyar Kula da Layi ta PI, Cibiyar Gudanarwa, Cibiyar sadarwa

Magana

Bar sharhi

Ba za a buga adireshin imel ɗin ku ba. Ana yiwa filayen da ake buƙata alama *