Trust Smart Home offers affordable, easy-to-install wireless home automation solutions including switches, dimmers, and sensors for lighting and appliance control.
Trust Smart Home is a brand of Trust International B.V., specializing in accessible wireless home automation. The brand provides a wide range of DIY smart home products designed to make life easier without the need for complex wiring or technical installation.
Their ecosystem typically includes the 'Start Line' (using 433 MHz frequency) and the 'Plus Line' (utilizing Zigbee or WiFi), covering everything from remote-controlled lighting and power sockets to wireless sensors and security devices. Trust Smart Home focuses on modular expandability, allowing users to start with a single switch and grow their system into a fully automated environment controlled via remote, wall switch, or app.
Latest manuals from manuals+ curated for this brand.
Common questions about manuals, registration, and support for this brand.
Plug the socket switch into an electrical outlet to activate pairing mode for 6 seconds. During this time, send an ON signal with your Trust Smart Home transmitter. The switch will click 4 times to confirm pairing.
Disconnect and reconnect the receiver to activate pairing mode. Within 6 seconds, send a GROUP OFF signal from your transmitter. The receiver will make a clicking sound to confirm the memory has been cleared.
Compliance documents and declarations of conformity for Trust Smart Home products are available at www.trust.com/compliance.
The AGC2-3500R outdoor socket switch supports a maximum load of 3500W. Do not connect devices that exceed this wattage.