Peasur offers solar-powered outdoor lights and indoor LED ceiling fixtures, providing practical illumination for gardens, pathways, patios, and living spaces.
Peasur offers solar-powered outdoor lighting and indoor LED ceiling fixtures. Its range includes motion-sensor wall lights, ground lights, post-cap lights, and ceiling lights with model-dependent dimming and color settings.
Browse Peasur manuals for installation, lighting-mode selection, maintenance, and troubleshooting. Check your product's model number before following a guide, since features and mounting requirements vary.
Selected manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Browse this category and match the model number on your light or packaging to the manual title. Available models include WS67, TBD-13, YHM-01B, and P8FSD-001.
Follow the model-specific mounting instructions, remove any protective film from the solar panel, and activate the switch or select a lighting mode. Place the panel where it receives direct sunlight and follow the manual's initial charging guidance.
Check that the light is switched on, clean the solar panel, and ensure it receives adequate direct sunlight. Confirm the selected operating mode and consult the model's troubleshooting guide if the problem persists.
No. Some outdoor models offer constant, dim-to-bright motion, and motion-only modes. Post-cap and indoor ceiling lights may offer color-temperature or brightness settings. Check your model's manual for the available controls.
Warranty terms vary by model. Check the documentation supplied with your product or contact the seller through your purchase order for assistance. A verified brand-wide registration page or support contact is not available here.