Peasur Solar Lights Outdoor Motion Sensor (Model YHM-01B) - Instruction Manual

1. Introduction

Thank you for choosing Peasur Solar Lights. This manual provides essential information for the safe and efficient use of your new solar outdoor motion sensor lights. Please read these instructions carefully before installation and retain them for future reference.

2. Safety Information

• Ensure the solar panel receives direct sunlight for optimal charging performance.
• Do not install the light near other strong light sources, as this may interfere with the light sensor and prevent automatic operation.
• Keep the product away from fire and extreme heat.
• Do not attempt to disassemble or modify the product. This may void the warranty and pose safety risks.
• The product is designed for outdoor use only and is IP65 waterproof. However, avoid submerging it in water.

3. Package Contents

Verify that all components are present in your package:

• Peasur Solar Lights (6 units)
• Mounting Screws and Wall Plugs (for each light)
• Instruction Manual (this document)

Image: Six Peasur solar lights, showing the solar panel, LED array, and motion sensor on each unit.

4. Product Features

• 140 LED Ultra-Bright Illumination: Each light is equipped with 140 high-quality LED beads for ample brightness.
• PIR Motion Sensor: Built-in sensitive light and PIR detection sensors accurately detect movement of people or animals. Detection distance: 4-5 meters (13-16 feet). Detection angle: 120°. Lighting angle: 180°.
• 3 Lighting Modes: Customizable lighting options to suit various needs.
• High Efficiency Solar Panel: Energy-saving laminated solar panel with a conversion rate of 20-22% for faster charging.
• IP65 Waterproof: Constructed from high-quality ABS material, heat-resistant and designed to withstand various weather conditions.

Image: A close-up view of the solar light highlighting the 140 LED array for ultra-bright illumination.

Image: Peasur solar lights mounted on a fence, demonstrating their IP65 waterproof and weather-resistant design in rainy conditions.

5. Setup and Installation

Follow these steps for optimal performance:

1. Choose Location: Select an outdoor location where the solar panel can receive direct sunlight for at least 6-8 hours daily. Avoid shaded areas or locations under strong artificial lights at night.
2. Initial Charge: Before first use, allow the solar lights to charge in direct sunlight for a full day (6-8 hours) to ensure the battery is fully charged.
3. Mounting Height: The ideal installation height is approximately 1.5 to 2 meters (5 to 6.5 feet) from the ground.
4. Installation Steps:
   • Mark the desired mounting position on the wall or fence.
   • Drill two holes at the marked positions.
   • Insert the wall plugs into the drilled holes.
   • Align the light with the holes and secure it with the provided screws.

Image: Visual guide for optimal solar light placement, emphasizing direct sunlight exposure and avoiding strong ambient light.

Image: Examples of Peasur solar lights installed on a garage wall, along stairs, on a patio wall, and on a fence, demonstrating versatile application.

6. Operating Instructions

The Peasur solar lights feature 3 distinct lighting modes. Use the button on the front of the light to cycle through the modes.

Image: A visual representation of the three operational modes for the solar lights.

1. Mode 1: Constant Light Mode

   The light automatically turns on at a medium brightness level at night and remains on until dawn or until the battery is depleted. It turns off during the day.

   

   Image: Mode 1 in operation, providing continuous medium light throughout the night.

2. Mode 2: Dim Light + Sensing Mode

   The light stays on at a low brightness level at night. When motion is detected, it switches to high brightness for approximately 20 seconds, then returns to dim light if no further motion is detected.

   

   Image: Mode 2 in operation, showing the light transitioning from dim to strong upon detecting movement.

3. Mode 3: Detection Mode

   The light remains off at night. When motion is detected, it turns on at full brightness for approximately 20 seconds, then turns off completely if no further motion is detected.

   

   Image: Mode 3 in operation, demonstrating the light activating to full brightness only when motion is detected.

To change modes, press the button located on the front of the light. Each press will cycle to the next mode. The light will flash to indicate the mode change.

7. Maintenance

• Regularly clean the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures efficient charging.
• Inspect the lights periodically for any physical damage or loose connections.
• In areas with heavy snow, ensure the solar panel is clear of snow to allow for charging.

8. Troubleshooting

9. Specifications

Image: Detailed dimensions of the Peasur solar light unit.

10. Warranty and Support

Peasur provides a 2-year warranty for this product. For any questions, concerns, or technical support, please contact Peasur customer service through the retailer where the product was purchased.