Nutek specializes in automotive security electronics, including remote start systems and keyless entry transmitters, as well as consumer audio products like speakers and headphones.
Nutek is a manufacturer recognized primarily for its automotive electronics and vehicle security solutions. The brand offers a variety of aftermarket upgrades, including remote engine start systems, car alarm security systems, and keyless entry transmitters. These devices are designed to enhance the safety and convenience of modern vehicles, often used as replacements or upgrades to factory systems.
Beyond the automotive sector, Nutek features a selection of consumer audio products. This includes portable wireless Bluetooth speakers, wired headphones, and earbuds tailored for personal listening. Below you will find a comprehensive library of user manuals, installation guides, and programming instructions for your Nutek devices.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Turn on the speaker and press/hold the pairing button (often the power button) until the LED indicator flashes rapidly. On your source device, enable Bluetooth and select the Nutek model from the list of available devices.
Use a small coin or flathead screwdriver to gently pry open the remote case at the slot. Replace the internal battery (commonly a CR2032 coin cell) ensuring the positive (+) side faces up, then snap the cover back together.
Common reasons for failure include an open car door, hood, or trunk, which triggers the safety disable feature. Also, check if the key fob battery is depleted or if the system is in Valet Mode.
Programming sequences vary by model (e.g., cycling the ignition key or using a Valet switch). Refer to the specific user manual for your alarm or keyless entry model for the exact learning procedure.