Nutek Bluetooth Stereo Speaker with Microphone BT226M1

Introduction

This manual provides instructions for the proper setup, operation, and maintenance of your Nutek BT226M1 Bluetooth Stereo Speaker with Microphone. Please read this manual thoroughly before use and retain it for future reference.

Safety Information

Important Safety Instructions:

• Do not expose the speaker to water or excessive moisture.
• Avoid extreme temperatures and direct sunlight.
• Do not disassemble or attempt to repair the speaker yourself.
• Use only the specified charging accessories.
• Keep out of reach of children.

Package Contents

Verify that all items are present:

• Nutek BT226M1 Bluetooth Stereo Speaker
• 3.5mm Aux-in cable
• Rechargeable Li-on battery (may be pre-installed)
• Charging Cable (USB-A to Micro-USB)
• User Manual

Product Overview

The Nutek BT226M1 is a portable Bluetooth stereo speaker designed for wireless audio streaming and hands-free calling. It features a built-in microphone, auxiliary input, and a rechargeable Li-on battery for extended use.

Setup

Charging the Speaker

Before first use, fully charge the speaker. Connect the charging cable to the speaker's charging port and a compatible USB power source. The charging indicator light will show charging status.

Powering On/Off

Press and hold the Power button to turn the speaker ON or OFF.

Operating

Bluetooth Pairing

1. Ensure the speaker is powered on and in pairing mode (indicator light will flash).
2. Enable Bluetooth on your device (smartphone, tablet, etc.).
3. Select 'Nutek BT226M1' from the list of available devices.
4. Once paired, the indicator light will become solid, and you will hear a confirmation tone.

Playing Audio via Bluetooth

After successful pairing, audio from your device will play through the speaker. Use your device or the speaker's controls to adjust volume and playback.

Using the AUX Input

Connect one end of the 3.5mm Aux-in cable to the speaker's AUX port and the other end to your audio device's headphone jack. The speaker will automatically switch to AUX mode.

Using the Microphone

When connected via Bluetooth, the built-in microphone allows for hands-free calls. Answer/end calls using the speaker's control buttons (if available) or your connected device.

Volume Control

Adjust volume using the dedicated volume buttons on the speaker or through your connected audio device.

Maintenance

Cleaning

Wipe the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.

Battery Care

To prolong battery life, avoid fully discharging the battery frequently. Recharge regularly.

Storage

Store the speaker in a cool, dry place when not in use for extended periods.

Troubleshooting

• Speaker will not turn on: Ensure the battery is charged. Connect to a power source and try again.
• Cannot pair via Bluetooth: Ensure the speaker is in pairing mode and within range. Turn off and on both the speaker and your device's Bluetooth. Clear previous pairings on your device.
• No sound: Check volume levels on both the speaker and your connected device. Ensure the correct input mode (Bluetooth/AUX) is selected.
• Microphone not working: Ensure the speaker is connected via Bluetooth and your device's microphone settings are configured correctly.

Specifications

Warranty Information

This product is covered by a limited manufacturer's warranty. Please refer to the warranty card included with your purchase or contact Nutek customer support for details.

Customer Support

For technical assistance or product inquiries, please contact Nutek customer support through their official website or the contact information provided with your purchase.