HuTools manufactures home security solutions including keyless entry door locks and fingerprint deadbolts, as well as decorative lighting and outdoor accessories.
HuTools is a provider of home improvement and security products, best known for its range of electronic keyless entry door locks. The brand focuses on modernizing home access with easy-to-install keypad deadbolts, fingerprint locks, and handle sets that eliminate the need for traditional keys. These smart locks often feature customizable user codes, auto-lock functionality, and anti-peep password protection, catering to homeowners seeking convenience and enhanced security.
Beyond door hardware, HuTools has expanded its catalog to include decorative lighting solutions, such as crystal crackle ball string lights, and outdoor accessories like inflatable camping pillows. The brand emphasizes DIY-friendly installation processes and responsive customer support, providing detailed manuals to assist users with programming and setup.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
To change the Master Code (default 12345678), press the HuTools button twice, enter the old Master Code, and press the HuTools button once. Then press the number '1', enter your new 4-10 digit code, and press the HuTools button. Repeat the new code and press the button again to confirm.
Remove one battery from the lock. Press and hold the reset button on the interior assembly. While holding the button, reinsert the battery and continue holding until the latch bolt extends and you hear a beep. This restores the default Master Code and deletes all user settings.
Yes, the auto-lock feature can be enabled to lock the door automatically between 10 and 99 seconds after unlocking. By default, this feature is disabled and must be programmed using the Master Code.
The lock typically requires 4 AA alkaline batteries. Do not use rechargeable batteries or mix old and new batteries, as this may affect performance.
If the latch binds or does not extend, ensure the bolt hole in the door frame is at least 1 inch deep. Also, perform the door orientation detection (reset process) again so the lock learns whether it is on a right-handed or left-handed door.