GLEDOPTO specializes in smart lighting control solutions, offering advanced ZigBee 3.0 and WiFi LED controllers compatible with major smart home ecosystems like Philips Hue, SmartThings, and Tuya.
GLEDOPTO is a prominent manufacturer known for its innovative smart lighting products, particularly its versatile line of LED strip controllers, bulbs, and spotlights. Focusing on interoperability, GLEDOPTO devices communicate primarily via ZigBee 3.0 and WiFi protocols, allowing seamless integration with popular home automation hubs such as Philips Hue, Amazon Echo Plus, Samsung SmartThings, and Tuya Smart Life.
Their product range covers RGBCCT, RGBW, and single-color dimming solutions, catering to both DIY enthusiasts using WLED firmware and general consumers looking to expand their smart home lighting setups affordably.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
To reset most GLEDOPTO controllers, either long-press the dedicated 'Reset' or 'OPT' button for more than 5 seconds until the light flashes, or power cycle the device (unplug and plug back in) 5 times continuously.
GLEDOPTO ZigBee 3.0 products are compatible with standard ZigBee gateways including Philips Hue Bridge, Amazon Echo Plus (with built-in ZigBee), Samsung SmartThings, and Tuya/Smart Life ZigBee hubs.
Power on the LED controller, and within 4 seconds, press the 'On' button for the desired zone on the remote. The connected LED strip will blink to confirm successful pairing.
Yes, specific GLEDOPTO models (such as the ESP32 and ESP8266 series controllers) are designed to run WLED firmware for advanced DIY lighting effects.