Gens ace specializes in high-performance LiPo battery packs and smart charging solutions for RC cars, drones, and UAVs.
Gens ace is a premier brand in the radio control (RC) hobby industry, renowned for manufacturing high-quality Lithium Polymer (LiPo) and Nickel-Metal Hydride (NiMH) battery packs. Designed for a wide range of applications including RC cars, airplanes, helicopters, and FPV racing drones, Gens ace products are engineered to deliver reliable power, high discharge rates, and long cycle life.
The brand is closely associated with its sibling line, Tattu, which focuses on professional UAV and drone power systems. Together under the parent company Grepow, they offer the G-Tech smart ecosystem, which simplifies battery management by allowing compatible chargers to automatically recognize battery parameters for safer and more efficient charging. From entry-level hobbyists to professional pilots, Gens ace provides the energy solutions needed to push the limits of performance.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
When connected to a Gens ace G-Tech charger (such as the iMars D300 or S100), the charger automatically recognizes the battery's parameters and begins the optimal charging capability after a short countdown. No manual setup is required.
If a battery becomes hot to the touch or starts to swell (change form) during use or charging, stop the process immediately. Disconnect the battery and place it in a fire-safe location. Do not attempt to use or charge a swollen battery.
The C rating indicates the maximum safe continuous discharge rate of the battery. A higher C rating allows for faster energy release, which provides more punch and power for high-performance RC vehicles and racing drones.
Yes, Gens ace G-Tech chargers support standard non-smart batteries (LiPo, LiFe, NiMH, etc.). You will need to manually set the battery type, voltage, and charging current before starting the cycle.