1. Introduction
The GENS ACE IMARS DUAL Channel Charger is a versatile and intelligent balance charger/discharger designed for various battery types, including Lipo, Li-Ion, LiHV, LiFe, NiMH/NiCd, and Pb batteries. It features dual-channel operation, AC and DC input capabilities, and a built-in DC power supply for charging external devices. This manual provides essential information for the safe and efficient use of your charger.
2. Package Contents
Please verify that all items listed below are included in your package:
- Gens ACE Dual Channel Smart Balance Charger x 1
- Power cord x 1
- USB to USB cable x 1 (for firmware upgrade)
- XT60 Female to EC5 Male cable x 1
- XT60 Female to XT30 Male cable x 1
- XT60 Female to T-Plug Male Cable x 1
3. Product Overview
Familiarize yourself with the charger's components and controls:
- Display: 2.4 inch IPS Sunshine screen for clear information display.
- Control Buttons: Up, Down, Confirm, Channel/Back, Enter/Setting for navigation and selection.
- AC Input Port: For connecting to a standard wall outlet (AC100-240V).
- DC Input Port: For connecting to an external DC power source (DC7-30V) via XT60PW-M connector.
- Charging Channels (CHA & CHB): Dual channels for simultaneous charging of two batteries.
- Balance Ports: For connecting battery balance leads (2S-6S).
- USB Output/Software Upgrade Port: For charging external devices or updating firmware.
- Vents: For efficient heat dissipation.
4. Setup Instructions
- Power Connection:
- For AC power: Connect the provided power cord to the AC input port on the charger and then to a wall outlet.
- For DC power: Connect an external DC power source (7-30V) to the DC input port using an XT60PW-M connector.
- Battery Connection:
- Identify the correct charging cable for your battery (e.g., XT60 Female to EC5 Male).
- Connect the main power lead of your battery to the XT60 output interface (CHA or CHB) on the charger.
- Connect the balance lead of your battery to the corresponding balance port (2S-6S) for the selected channel. Ensure correct polarity.
- Initial Power On: Once connected, the charger display will light up.
5. Operating Instructions
The IMARS DUAL charger offers various functions for battery management:
5.1. Basic Operation
- Use the Up and Down buttons to navigate through menus and adjust values.
- Press Confirm to select an option or confirm a setting.
- Use Channel/Back to switch between channels or return to the previous menu.
- Press Enter/Setting to access detailed settings for the selected function.
5.2. Function Selection
The charger supports the following functions:
- Charge: Standard charging mode.
- Discharge: Discharges the battery to a set voltage.
- Storage: Charges or discharges the battery to a safe storage voltage.
- Balance: Balances individual cell voltages during charging.
- External Discharge Digital Power Supply: Utilize the charger's power for external devices.
- Two-in-one Charge: Combine charging power for a single battery using a parallel charging cable (up to 23 Amps).
5.3. Charging Batteries
- Connect your battery to the desired channel (CHA or CHB) and its balance port.
- Select the 'Charge' function from the main menu.
- Choose the correct battery type (Lipo, LiHV, etc.) and cell count (e.g., 3S, 4S).
- Set the desired charging current (e.g., 5A). Ensure the current does not exceed the battery's maximum charge rate.
- Confirm settings and start charging. The display will show real-time charging status.
5.4. Using the Built-in DC Power Source
The charger can act as a power station for USB-compatible devices:
- Connect your mobile phone, iPad, or other USB device to the USB output port.
- The charger will automatically provide power to the connected device.
5.5. External Discharge Function
The charger supports external discharge for accessories like tire heaters or soldering irons:
- Select the 'External Discharge' function.
- Connect your external load to the appropriate output port.
- Adjust settings as needed for your accessory.
5.6. 2-in-1 Fast Charging
For higher charging currents on a single battery, you can combine the two channels:
- Use a parallel charging cable to connect a single battery to both CHA and CHB outputs.
- Select the 'Two-in-one Charge' function.
- The charging current can be adjusted up to 23 Amps.
6. Maintenance
- Cleaning: Keep the charger clean and free from dust. Use a soft, dry cloth for cleaning. Do not use solvents or abrasive cleaners.
- Storage: Store the charger in a dry environment within the specified storage temperature range (-20°C to 60°C / -4°F to 140°F).
- Ventilation: Ensure the charger's vents are not obstructed during operation to allow for proper heat dissipation.
- Cable Inspection: Regularly inspect all cables for signs of wear or damage. Replace any damaged cables immediately.
- Firmware Updates: Check the manufacturer's website periodically for firmware updates to ensure optimal performance and new features. Use the provided USB to USB cable for upgrades.
7. Troubleshooting
If you encounter issues with your charger, refer to the following common problems and solutions:
- Charger not powering on:
- Check if the power cord is securely connected to both the charger and the power outlet.
- Ensure the power outlet is functional.
- If using DC input, verify the external DC power source is providing the correct voltage (7-30V) and is properly connected.
- Charging error message:
- Verify that the correct battery type and cell count are selected in the charger settings.
- Check all battery connections, including the main power lead and balance lead, for proper polarity and secure contact.
- Inspect the battery for any physical damage or swelling. Do not charge damaged batteries.
- The charger has advanced safety features (short circuit, overcurrent, overcharge, overvoltage protection). An error might indicate one of these protections has been triggered. Disconnect the battery, check for issues, and try again.
- Slow charging:
- Ensure the charging current is set appropriately for your battery's capacity.
- Check the input power source; insufficient input power can lead to slower charging.
- Charger getting hot:
- Some heat generation during charging is normal.
- Ensure the charger is placed in a well-ventilated area and its vents are not blocked.
- If the heat is excessive, reduce the charging current or stop charging and allow the unit to cool.
8. Specifications
| Parameter | Value |
|---|---|
| Model Number | GENS ACE IMARS DUAL Channel Charger |
| Display | 2.4 inch IPS Sunshine screen |
| Channels | 2 |
| Input Voltage (AC) | AC100-240V |
| Input Voltage (DC) | DC7-30V |
| Input Current (DC) | DC-30A |
| Charging Current | 0.1-15A*2 |
| Balance Charge Current | 1.2A/CELL MAX*2 |
| Voltage Error | STANDARD ±10MV |
| Discharge Current | 0.1-3A*2 |
| Max Discharge Power | 15W*2 (main port 6W*2, balance port 9W*2) |
| Max Load Power (AC) | AC200W (intelligent distribution) |
| Max Load Power (DC) | DC2x300W |
| Balanced Serial Number | 1~6S |
| Battery Type Compatibility | LIPO/LI-ION/LIHV/LIFE 1~6S, NIMH/NiCd 1~6S, Pb |
| Working Temperature | 0~65℃ (32~149°F) |
| Storage Temperature | -20~60℃ (-4~140°F) |
| DC Input Interface | XT60PW-M |
| Output Interface | XT60PW-M |
| Size | 145*76*62mm |
| Weight | Approx. 435g |
| DIY Supplies | Electrical |
| Origin | Mainland China |
9. User Tips
- Always double-check battery polarity and settings before starting any charge or discharge cycle to prevent damage to the battery or charger.
- For optimal battery life, use the 'Storage' function when storing batteries for extended periods.
- Take advantage of the dual-channel capability to charge two different batteries simultaneously, or use the 2-in-1 mode for faster charging of a single high-capacity battery.
- Keep the charger in a clean, dry, and well-ventilated area during operation.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.