Leading manufacturer of advanced control systems, keypads, pumps, and accessories for the spa and hot tub industry.
Gecko (Gecko Alliance) is a prominent manufacturer specializing in the design and production of electronic control systems and accessories for the spa and hot tub industry. Based in Quebec, Canada, Gecko is well-known for its user-friendly "in.series" products, including the in.ye and in.xe control systems, in.k keypads, and in.touch remote monitoring solutions.
While the brand name "Gecko" is shared by other entities—including Gecko Musical Instruments and Gecko Robotics—the extensive library of technical manuals and documentation found here primarily supports Gecko Alliance's spa equipment and water care systems.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
To pair the in.touch 2 modules, ensure the spa transmitter is connected to the spa control pack. Press the pairing button on the home transmitter (EN module) while it is powered. The units should automatically find each other; refer to the LED status guide if issues persist.
A red blinking LED often indicates a bad Modbus address issue, while a white blinking LED may indicate no application is in flash memory. A solid green LED indicates normal operation.
The serial number and model information are typically located on a silver or white label adhered to the side or top of the metal control box enclosure.
Soak the pH/ORP electrode in 0.1 M HCl for 20 minutes for general cleaning. Rinse thoroughly with deionized or tap water before reinstalling in the chamber.