gecko-logo

GECKO in.touch 3 and 3 Plus 2 Wifi Kit for Freeflow Spas

GECKO-in-touch-3-and-3-Plus-2-Wifi-Kit-for-Freeflow-Spas-feathure

Specifications

  • Model: in.touch 3 & 3+
  • Product Type: Home Spa Control System
  • Manufacturer: Gecko Alliance
  • Address: 450 des Canetons, Quebec City, QC Canada G2E 5W6
  • Contact: +1 800.78.GECKO, info@geckoal.com
  • Website: www.geckoalliance.com

Product Usage Instructions

Setup and Troubleshooting

To set up the in.touch 3 & 3+ system, follow these steps:

  1. Position the in.touch 3-Home unit outside near the spa.
  2. Connect the unit to a power source using an extension cord.
  3. If the LED blinks, check for the possible issues mentioned in the manual.
  4. If the modules are out of range or unpaired, try moving them closer or follow the pairing instructions in the Techbook.
  5. If the LED is green, ensure that port 10022 is open on your router for Internet access.

Contact Information
If you need further assistance or product information, reach out to your sales representative or contact Gecko Alliance using the provided information above.

 

GECKO-in-touch-3-and-3-Plus-2-Wifi-Kit-for-Freeflow-Spas-fig-1 GECKO-in-touch-3-and-3-Plus-2-Wifi-Kit-for-Freeflow-Spas-fig-2 GECKO-in-touch-3-and-3-Plus-2-Wifi-Kit-for-Freeflow-Spas-fig-3

Troubleshooting

Blinking LED Modules may be… Out of range Simply connect in.touch 3-Home outside, near the spa (using an extension cord for power). A router connection is not required for this test. If the modules stop blinking, the only solution is to move them closer together.

For additional troubleshooting assistance or product information, contact your sales representative

FAQs

Q: What should I do if the LED continues blinking after troubleshooting?
A: If the LED persists, contact your sales representative or Gecko Alliance for advanced troubleshooting steps.

Q: Is a router connection required for the in.touch 3 & 3+ system?
A: A router connection is not necessary for basic setup and testing. However, for full functionality, ensure that port 10022 is open on your router.

Documents / Resources

GECKO in.touch 3 and 3 Plus 2 Wifi Kit for Freeflow Spas [pdf] User Guide
in.touch 3 and 3 Plus 2 Wifi Kit for Freeflow Spas, in.touch 3 and 3 Plus, 2 Wifi Kit for Freeflow Spas, Freeflow Spas

References

Leave a comment

Your email address will not be published. Required fields are marked *