ACEZUK M07 Car Jump Starter and Portable Air Compressor User Manual

1. Introduction

Thank you for choosing the ACEZUK M07 Car Jump Starter and Portable Air Compressor. This device is designed to provide reliable jump-starting for vehicles, inflate tires and other items, serve as a power bank for electronic devices, and offer emergency lighting. Please read this manual thoroughly before use to ensure safe and optimal performance.

Figure 1: ACEZUK M07 Jump Starter and its included accessories.

2. Safety Instructions

WARNING: Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Do not expose the device to high temperatures, open flames, or extreme cold environments.
• Keep out of reach of children.
• Do not disassemble, modify, or attempt to repair the unit. Contact customer support if service is required.
• Ensure proper ventilation during use and charging.
• Avoid short-circuiting the output terminals.
• Do not jump-start a frozen battery.
• Always connect the red clamp to the positive (+) terminal and the black clamp to the negative (-) terminal.
• Remove the jump starter from the vehicle battery within 30 seconds after the engine starts.
• Wear eye protection when working with batteries.

3. Product Overview

The ACEZUK M07 is a versatile device combining multiple essential functions for vehicle owners and outdoor enthusiasts. It features a powerful jump starter, a portable air compressor, a power bank with USB outputs, and a multi-mode LED light.

Figure 2: Functional areas of the ACEZUK M07. Key components include the EC5 port for jump starting, USB-C input/output, USB output, LED display, control buttons, and air compressor ports.

4. What's in the Box

Upon opening your ACEZUK M07 package, you should find the following items:

• ACEZUK M07 Jump Starter Unit
• Smart Jumper Cables
• Air Hose
• Various Air Nozzles (for different inflatables)
• USB-C Charging Cable
• User Manual

5. Setup

5.1 Initial Charging

Before first use, fully charge the ACEZUK M07 unit. Connect the provided USB-C charging cable to the USB-C IN port on the device and to a suitable USB power adapter (not included). The LED display will indicate the charging status. A full charge is recommended for optimal performance.

5.2 Checking Battery Level

Press any button on the unit to activate the LED display and check the current battery level. Ensure the device has sufficient charge before attempting to jump-start a vehicle or use the air compressor for extended periods.

6. Operating Instructions

6.1 Jump Starting a Vehicle

1. Ensure the jump starter is at least 50% charged.
2. Turn off your vehicle's ignition and all accessories.
3. Connect the smart jumper cables to the EC5 port on the jump starter. The indicator light on the smart cable should flash green.
4. Connect the red (+) clamp to the positive terminal of your vehicle's battery.
5. Connect the black (-) clamp to the negative terminal of your vehicle's battery.
6. Once connected correctly, the indicator light on the smart cable should turn solid green. If it flashes red or beeps, check connections or refer to troubleshooting.
7. Start your vehicle's engine.
8. Once the engine starts, immediately remove the smart jumper cables from the vehicle battery, then disconnect from the jump starter.

Figure 3: Proper connection of the jump starter to a vehicle battery.

6.2 Using the Air Compressor

1. Connect the air hose to the air outlet port on the jump starter.
2. Attach the appropriate nozzle to the air hose for the item you wish to inflate (e.g., car tire, bicycle tire, ball).
3. Connect the nozzle to the item's valve.
4. Turn on the air compressor function using the designated button.
5. Use the '+' and '-' buttons to set the desired pressure (PSI, BAR, KPA, or Kg/cm²). The smart display will show the current and target pressure.
6. Press the start button to begin inflation. The compressor will automatically stop once the target pressure is reached.
7. Disconnect the nozzle and air hose.

Figure 4: The smart display provides real-time information and allows setting target inflation pressure.

Figure 5: The M07 can inflate various items, including car tires (up to 58 PSI), bicycle tires (up to 150 PSI), motorcycle tires (up to 51 PSI), and basketballs (up to 14 PSI).

6.3 Using as a Power Bank

The ACEZUK M07 can charge your electronic devices via its USB-C OUT and USB OUT ports.

1. Connect your device's charging cable to one of the USB output ports on the jump starter.
2. The jump starter will automatically begin charging your device.
3. Monitor your device's charging status.

6.4 Using the LED Light

The integrated LED light offers multiple modes for various situations.

1. Press the LED light button once for constant illumination mode.
2. Press again for strobe mode.
3. Press a third time for SOS signal mode.
4. Press a fourth time to turn off the light.

Figure 6: The LED light offers illumination, strobe, and SOS modes for emergency situations.

7. Maintenance

7.1 Charging

To prolong battery life, it is recommended to fully charge the ACEZUK M07 every 3-6 months, even if not in use. This prevents deep discharge and maintains battery health.

7.2 Storage

Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Ensure all cables are neatly stored to prevent damage.

7.3 Cleaning

Wipe the exterior of the unit with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure all ports are free from dust and debris.

8. Troubleshooting

• Device not turning on: Ensure the unit is charged. If not, connect it to a charger.
• Vehicle not starting after jump-start attempt: Check that the smart jumper cables are securely connected to both the jump starter and the vehicle battery terminals. Ensure the indicator light on the smart cable is solid green. The vehicle battery might be severely discharged or damaged, or there might be another issue with the vehicle.
• Air compressor not inflating: Check that the air hose and nozzle are securely attached and that the target pressure is set correctly. Ensure the unit has sufficient battery charge.
• Smart cable indicator flashing red/beeping: This usually indicates an incorrect connection (e.g., reverse polarity) or a problem with the vehicle battery. Disconnect and re-connect carefully, ensuring red to positive (+) and black to negative (-).

9. Specifications

Figure 7: Detailed specifications printed on the product unit.

10. Warranty and Support

For warranty information or technical support, please contact ACEZUK customer service. You can typically find contact details on the product packaging or through the retailer where you purchased the item.

Email: ACEZUK@outlook.com

Figure 8: Contact information and disposal guidelines found on the product packaging.