ACEZUK M03 User Manual
Contact: ACEZUK@outlook.com
Package Contents
- M03 Jump Starter
- Smart Battery Clamps
- USB Charging Cable
- User Manual
- Air Hose
- Inflatable Nozzles
- Storage Box
Introduction
Thank you for choosing the ACEZUK M03 Jump Starter Set. Please read the user manual carefully before operating the product.
Charge First! While reading this manual, you can charge your M03 with your adapter (not included in the delivery).
⚠️ Warning: This device is intended for vehicles with 12V batteries and can be dangerous if used with other battery types. Read and understand the safety instructions before using the jump starter. Failure to do so may result in electric shock, explosion, fire, property damage, and personal injury.
Technical Details
| Model | M03 |
| Capacity | 26800mAh 99.16Wh |
| Type-C Input/Output | 5V 3A (15W Input/Output) |
| USB1/USB2 Output | 5V 3.1A |
| Air Compressor | 150PSI |
| Dimensions (L*W*H) | 213*115*58mm |
| Weight | 2.28lbs (1.035kg) |
| Jumpstarter Output | 12V |
| Working Temperature | -20°C to 60°C (-4°F to 140°F) |
| LED Flashlight | 400 Lumens |
| Internal Battery | Lithium polymer |
| Screen Size | 47*20mm |
Know Your Product
Diagram showing the ACEZUK M03 device with numbered components:
- 1. Light Button: Controls the LED flashlight.
- 2. "+" Button: Increases air pressure or navigates up.
- 3. Power Button: Turns the device on/off and initiates jump-starting.
- 4. "-" Button: Decreases air pressure or navigates down.
- 5. Light: Indicates the status of the LED light.
- 6. Mode Button: Cycles through different modes (e.g., inflation modes).
- 7. LCD Display: Shows battery status, pressure, units, and error messages.
- 8. Air Inflation Port: Connect the air hose here to inflate tires.
- 9. Type-C Input Port: For charging the device.
- 10. USB Output Port: For charging external devices.
- 11. Straw Hat Lamp: A small LED light.
- 12. EC5 Connector: Port for connecting the jump starter cables.
Technical Specifications
| No. | Button/Feature | Function |
|---|---|---|
| 1 | Light Button | Press to turn on the flashlight. |
| 2 | "+" Button | Increase air pressure. |
| 3 | Power Button | Press the button to jump-start your car. |
| 4 | "-" Button | Decrease air pressure. |
| 5 | LED Light | Modes: Normal, Slow Flash, SOS, Off. |
| 6 | Mode Button | Select inflation mode for different items. |
| 7 | LCD Display | ① Displays remaining battery capacity. ② Displays inflation mode, unit, value, or error warnings. |
| 8 | Air Hose | Use to fill your tires. |
| 9 | Type-C Output | 15W input/output for charging or recharging. |
| 10 | USB Output | Charge your device via the USB port. |
| 11 | Straw Hat Light | Provides illumination during inflation. |
| 12 | EC5 | Connect the jump starter cable firmly into the EC5 port. |
Display Indicators
The LCD display shows various information:
| No. | Icon | Function |
|---|---|---|
| 1 | [Battery Indicator] | Shows battery capacity. |
| 2 | [Vehicle Type Icons] | Select different tire types for inflation. |
| 3 | [PSI/BAR/KPA/Kg/cm²] | Air pressure unit. |
| 4 | [Temperature Warning] | Indicates abnormal battery temperature. |
| 5 | [Blower Status] | Indicates the blower is operating. |
| 6 | [Output Indicator] | Indicates charging other devices (output). |
| 7 | [Input Indicator] | Indicates charging the device (input). |
| 8 | [Normal Status] | Indicates normal status. |
| 9 | [Value/Error Display] | Shows measured values or error messages. |
Charging Your Jump Starter
How to Charge the Product:
- Connect the USB-C end of the USB charging cable to a charger.
- Connect the USB-C end of the USB charging cable to the Type-C port of the product.
Note: It is recommended to charge the Jump Starter every 3-4 months to maintain efficiency and prolong the lifespan of the internal battery, even when the device is not in use.
Checking Charge Status
Indicator & Battery Level:
- 1 Bar: Below 25%
- 2 Bars: Between 25% and 50%
- 3 Bars: Between 50% and 75%
- 4 Bars: Between 75% and 100%
Note: The battery indicators light up circularly during the charging process. The illuminated indicators show the current battery level. When all battery indicators are lit, the charging process is complete.
Charging Other Devices
In addition to jump-starting a car, this product can also power mobile phones, PSPs, MP3/MP4 players, cameras, and other entertainment electronics.
[Text description of image: Various electronic devices including a car, headphones, camera, and smartphone are shown, illustrating the product's capability to charge them.]
How to Jump Start
Step 1 - Readiness Status
Plug the cable connector firmly into the EC5 port of the jump starter. The display will show the jump starter's voltage, and a small symbol at the top will cycle from left to right.
[Diagram description: The jump starter is shown connected to the battery clamps. Close-ups of the display indicate voltage and status icons like low voltage, reverse connection, short circuit, reverse charge, and high temperature.]
Status Indicators:
- [Low Voltage] Under-voltage indicator
- [Reverse Connection] Indicator for reverse connection
- [Short Circuit] Short-circuit indicator
- [Reverse Charge] Reverse-charge indicator
- [High Temperature] Indicator for high temperature
The voltage displayed refers to either the jump starter's voltage or the car battery voltage, depending on the connection.
Step 2 - Working Status
Connect the red clamp to the positive (+) terminal of the car battery and the black clamp to the negative (-) terminal. The display will show the jump starter's voltage, and the top symbol will no longer be displayed.
[Diagram description: The red and black clamps are shown connected to the positive and negative terminals of a car battery, respectively.]
Step 3 - Start the Engine
- Please start the engine within 90 seconds after entering the working status. Otherwise, the jump starter clamp will activate the timeout protection.
- If the engine does not start on the first attempt, please try again. After 5 attempts, the smart clamp will trigger protection. At this point, disconnect the clamp from the car battery and wait at least 20 seconds before reconnecting.
[Diagram description: The jump starter is connected to the car battery, with an illustration of a car engine being started.]
Step 4 - Remove the Clamp
Remove the battery clamps from the car battery and the jump starter within 30 seconds after starting the engine.
[Diagram description: The red and black clamps are shown being removed from the car battery terminals.]
Notes:
- Do not use this device as a battery charger for car batteries.
- Ensure all electrical devices on board the vehicle being assisted are turned off before starting.
- Please ensure the power level is above 50% when using it to start your vehicle.
- After a successful start, please remove the product from the car battery within 30 seconds, otherwise, damage may occur.
- Do not use the device to start the car more than 5 times consecutively. This can lead to overheating and damage to the device. Each start should be spaced at least two minutes apart.
- The product is only suitable for starting vehicles. Do not use it for aircraft or ships.
- Due to long storage or transport, the battery must be fully charged before the first use. (Even if the battery shows sufficient charge, this may lead to battery damage and charging failure.)
Inflate Tires
1. OK Button Operation:
- a.) When the device is off: Short press.
- b.) When the device is on and not inflating: Press the OK button to turn off.
- c.) When the device is on and not inflating: Press and hold the OK button for 3 seconds to start inflating.
- d.) When the device is on and inflating: Short press or long press for 3 seconds to stop inflating.
2. M Button Operation:
When the jump starter is on, press the M button to change the inflation mode. The mode sequence is: Auto (default 36PSI) → Motorcycle (default 36PSI) → Bicycle (default 60PSI) → Balls (default 8PSI). The corresponding symbol will be highlighted and switch to its default value. Then, press and hold for 3 seconds to enter the unit selection mode. While the unit is blinking, short press to cycle through units: PSI/BAR/KPA/Kg/Cm². If no operation is performed for six blinks, it will stop.
[Diagram description: The device is shown with the M and OK buttons highlighted for operation.]
3. +/- Buttons:
Set the preset air pressure value. Short press to increase or decrease. Long press for 3 seconds to switch to rapid increase or decrease. The air pressure value will revert to the default after powering off or switching modes.
[Diagram description: The device is shown with the +/- buttons highlighted for adjusting pressure.]
4. Inflation Process:
Connect the inflatable object after turning on the device. The pressure of the connected object can only be displayed if the air pressure is greater than 3 PSI. If the real-time pressure is greater than the set value, the pump will not start. If the real-time pressure is less than the set value, press the OK button to start inflating. Inflation will stop automatically when the air pressure reaches the preset value.
Protection Features & Suitability
5. Over-inflation Protection:
To prevent tire blowouts during inflation. There are two situations for over-time protection:
- The air pressure remains "0" for 120 seconds, and the display blinks "to" 6 times.
- The air pressure does not increase for 120 seconds, the machine stops automatically, and the display blinks "to" 6 times.
6. Overheating Protection:
The product features battery over-temperature protection. The temperature sensor is located on the exterior of the battery. If the battery temperature reaches 65°C±5°C, the battery board will interrupt power supply. When the temperature drops to 55°C±5°C after protection, press the OK button to restore.
7. M03 Suitability:
The M03 is suitable for road bike tires (up to 120PSI), small car tires (up to 40PSI), and low-pressure inflation for motorboats or balls. It is not suitable for medium and large trucks or buses. (The tire pressure of heavy-duty vehicles is relatively high, and the inflation time will be longer, causing the motor, pump, and air hose to withstand higher pressure, resistance, and temperature, which may affect the product's lifespan or even damage the air pump.)
Tips and Pressure Information
Tips:
The maximum pressure in the custom mode is 150 PSI, while the other four modes have preset values to avoid damage or safety risks.
| Car | 58 PSI / 4 Bar | Bicycle | 150 PSI / 10.3 Bar |
| Motorcycle | 51 PSI / 3.5 Bar | Basketball | 14 PSI / 1 Bar |
Note: The air hose heats up during inflation; do not touch the air hose directly, as this can cause burns.
Ensuring Correct Pressure:
To avoid over-inflation, please check the maximum air pressure of the items to be inflated. Over-inflating items can lead to damage and injuries.
Tire Pressure:
Recommended tire pressure is usually indicated on the tire sidewall or on the inside of the driver's door. For information on load capacity and recommended tire pressure, refer to your vehicle's instructions/manuals.
Balls:
The recommended pressure can be found on the air valve of footballs, basketballs, volleyballs, and most other balls.
Air Pressure Reference Table
Bicycles
| Type | Recommended Pressure Range |
|---|---|
| Electric Folding Bike Tires | 10-50 PSI / 0.7-3.5 Bar |
| 12, 14, 16 Inch Bicycle Tires | 30-50 PSI / 2.1-3.5 Bar |
| 20, 22, 24 Inch Bicycle Tires | 40-50 PSI / 2.8-3.5 Bar |
| 26, 27.5, 29 Inch Mountain Bike Tires | 45-65 PSI / 3.1-4.5 Bar |
| Electric Scooter Tires | 40-50 PSI / 2.8-3.5 Bar |
| 700c Road Bike Clincher Tires | 100-130 PSI / 6.9-9.0 Bar |
| 700c Road Bike Tubular Tires | 120-145 PSI / 8.3-10.0 Bar |
Motorcycles
| Type | Recommended Pressure Range |
|---|---|
| Tires for Scooters and Street Motorcycles | 26-43 PSI / 1.8-3.0 Bar |
Car
| Type | Recommended Pressure Range |
|---|---|
| Car Tires | 32-41 PSI / 2.2-2.8 Bar |
Balls
| Type | Recommended Pressure Range |
|---|---|
| Basketball | 7-9 PSI / 0.5-0.6 Bar |
| Football | 8-16 PSI / 0.6-1.1 Bar |
| Volleyball | 4-5 PSI / 0.3 Bar |
| Football (American) | 12-14 PSI / 0.8-1.0 Bar |
Note: The pressure values mentioned above are for reference only. Please read the object's manual or the manufacturer's instructions for specific pressure information.
LED Light
The ACEZUK M03 jump starter features two LED lights: a small "straw hat" light and a 400-lumen flashlight.
[Diagram description: The location of the small LED and the main flashlight on the device are shown.]
Straw Hat Light:
When the jump starter is on, short press the Light button to turn on the straw hat light. This light is only active when the jump starter is on. Short press again to turn it off.
400-Lumen Flashlight:
Long press the Light button to turn on the flashlight (the straw hat light will turn off). Short press the Light button for a slow blink, press again for SOS mode, and a third short press to turn off the flashlight. To turn off the flashlight directly, hold the Light button for a few seconds.
Error Code Troubleshooting
| CODE | ERROR | WHAT TO DO |
|---|---|---|
| E01 | Sensor Anomaly | Indicates a fault in the main control circuit. Requires professional technical maintenance. |
| E02 | Motor Overheating | Place the device in a shaded area or near an air conditioning vent for 5 minutes, then try again. |
| E04 | USB-A Overload or Short Circuit | Press the OK button to turn on the device after unplugging the USB-A cable. If E04 is no longer displayed, you can reconnect the charged device. If E04 reappears, it indicates the charged device is abnormal or incompatible with the output device. |
| E05 | Motor Overcurrent | Wait until the temperature drops below 40°C before continuing inflation. If the phenomenon persists, professional expertise is required. |
| E06 | Abnormal Charging Voltage (>6.0V or <4.0V) | Charging may stop until the charger's temperature drops below 40°C. If the issue persists, replace the charger. |
| E07 | Battery Temperature Too High for Charging | Place the device in a shaded area or near an air conditioning vent for 5 minutes, then use it again. |
| E08 | Battery Temperature Too Low for Charging | Bring the device to an environment between 10°C - 40°C for some time. |
| E09 | Battery Temperature Too High for Charging | Place the device in a shaded area or near an air conditioning vent for 5 minutes, then use it again. |
| E10 | Battery Temperature Too Low for Charging | Bring the device to an environment between 10°C - 40°C for some time. |
| E11 | USB-C Overload or Short Circuit | Press the OK button to turn on the device after unplugging the USB-C cable. If E011 is no longer displayed, you can reconnect the charged device. If E011 reappears, it indicates the charged device is abnormal or incompatible with the output device. |
| To | Leakage | Check if the air hose connection is leaking or if the inflated item has a leak. |
Warnings
- Always read all instructions carefully before using your jump starter.
- Do not immerse the jump starter in water or expose it to rain or moisture.
- Never open or disassemble your jump starter, as this will void your warranty.
- Do not expose the jump starter to fire, strong heat, or flammable liquids.
- Only charge the product at temperatures between -20°C to +75°C.
- Keep the device away from children and out of their reach.
- Do not insert foreign objects into the input or output ports.
- Ensure the metal teeth of the red clamp do not touch the metal teeth of the black clamp when connected to the jump starter.
- Do not connect the black clamp to the positive (+) terminal of the vehicle battery.
- Do not connect the red clamp to the negative (-) terminal of the vehicle battery.
- Do not open the jump starter to replace the internal battery. There are no user-replaceable parts inside.
- Always disconnect the jump starter cables from the jump starter and store them separately after use.
- Check the product's performance at least every three months and charge it promptly.
Battery Disposal
The battery is sealed and not user-replaceable. The battery must be disposed of properly when it can no longer be charged. Proper charging extends the product's lifespan.
Warranty
For additional support or warranty claims, please contact us via email: ACEZUK@outlook.com
Customer Support
If you have any questions, please feel free to contact us by email anytime. We will do our best to help you as soon as possible.
Email: ACEZUK@outlook.com
