Introduction
This manual provides essential information for the installation, operation, and maintenance of your Kwikset SmartCode 270 Keyless Entry Electronic Touchpad Deadbolt Door Lock. Please read these instructions thoroughly before installation and use to ensure proper function and security.
Safety Information
- Do not attempt to disassemble or modify the lock. This may void the warranty and compromise security.
- Use only the specified battery type (4x AA alkaline batteries). Do not mix old and new batteries or different battery types.
- Keep all components out of reach of children.
- Ensure the door frame is structurally sound and properly aligned for optimal lock performance.
- Regularly check the lock for any signs of wear or damage. If damage is found, contact Kwikset support.
What's in the Box
Image: All components included in the Kwikset SmartCode 270 packaging, laid out on a surface.
- Exterior Touchpad Assembly
- Interior Lock Assembly
- Adjustable Latch
- Strike Plate
- Mounting Bracket
- SmartKey Tool
- 2 Kwikset Keys
- Installation Hardware (screws)
- Installation Guide
Setup and Installation
The Kwikset SmartCode 270 is designed for easy installation, typically requiring only a screwdriver. For detailed, interactive 3D instructions with voice, text, and animation guidance, download the BILT app.
Pre-Installation Checks
- Ensure your door thickness is between 1-3/8" and 2" (35mm-51mm).
- Verify the backset is either 2-3/8" or 2-3/4" (60mm or 70mm).
- Confirm the cross-bore hole in the door is 2-1/8" (54mm) in diameter.
Installation Steps (Overview)
- Prepare the Door: If necessary, use the provided drilling template to ensure correct hole placement.
- Install the Latch: Insert the adjustable latch into the door edge and secure it with screws. Ensure the latch is set to the correct backset.
- Install the Exterior Assembly: Place the exterior touchpad assembly onto the door, ensuring the spindle passes through the latch.
- Install the Mounting Plate: Secure the interior mounting plate to the exterior assembly with screws. Route the cable through the plate.
- Install the Interior Assembly: Connect the cable from the exterior assembly to the interior assembly. Attach the interior assembly to the mounting plate and secure it.
- Insert Batteries: Install 4 AA alkaline batteries (not included) into the interior assembly.
- Perform Door Handing Process: Follow the instructions in the full guide to calibrate the lock to your door's orientation.
Image: A person installing the Kwikset SmartCode 270 lock on a door using a screwdriver, demonstrating the ease of installation.
Operating Instructions
Keyless Entry Operation
The touchpad allows for convenient keyless entry. To lock or unlock, simply use your programmed user code.
Image: A person entering a code on the Kwikset SmartCode 270 keypad to unlock a door, highlighting the keyless entry feature.
Programming User Codes
You can customize up to 50 user codes and 10 one-time user codes. A programming code allows you to add or delete user codes as needed. Refer to the detailed programming guide included with your lock for specific steps.
Image: The Kwikset SmartCode 270 keypad with an overlay indicating the ability to manage up to 50 user codes, illustrating code management capabilities.
Auto-Lock Feature
For enhanced security, the lock can be configured to automatically lock after a set period. You can customize the auto-lock delay to 30 seconds, 1 minute, 3 minutes, 5 minutes, or 10 minutes.
Image: A woman and her dog entering a home, with an overlay showing the Kwikset SmartCode 270's auto-lock feature and customizable time settings (30 sec, 1 min, 3 min, 5 min, 10 min).
Vacation Mode
Activate Vacation Mode to temporarily disable the keypad, preventing unauthorized access while you are away. This feature ensures the lock cannot be operated from the exterior keypad.
Low Light Code Entry
The keypad features bright LED lights that illuminate the numbers, making it easy to enter your user code in low-light conditions or at night. Simply tap the keypad to activate the lights.
Intrusion Alert
After three consecutive incorrect code entries, the lock will sound an alarm and disable the keypad for one minute to deter tampering.
SmartKey Security Re-Keying
The SmartKey Security feature allows you to re-key your lock yourself in seconds to any Kwikset (KW1) key. This provides flexibility and enhanced security, especially if you need to change keys without replacing the entire lock.
Image: An illustration demonstrating the Kwikset SmartKey Security feature, showing the re-keying tool and a key, emphasizing the ease of re-keying.
Maintenance
Battery Replacement
The lock requires 4 AA alkaline batteries (not included) for operation. The battery life is approximately 12 months. Replace batteries when the low battery indicator appears or when the lock's response time slows.
Image: The interior assembly of the Kwikset SmartCode 270 lock with the battery cover removed, showing the compartment for four AA batteries.
Cleaning
Clean the lock's exterior with a soft, damp cloth. Avoid abrasive cleaners or solvents, as these can damage the finish and electronic components.
Troubleshooting
- Lock not responding: Check battery levels and replace if necessary. Ensure the cable connection between the exterior and interior assemblies is secure.
- Deadbolt not extending/retracting fully: Verify that the door frame strike plate hole is deep enough to accommodate the deadbolt. Ensure the lock is properly aligned and screws are not overtightened, which can cause binding.
- Keypad lights not illuminating: Tap the keypad to activate the backlight. If still unresponsive, check batteries.
- Incorrect code entries: The lock will sound an alarm and disable the keypad for 1 minute after 3 incorrect attempts. Wait for the lockout period to expire before trying again.
Specifications
| Brand | Kwikset |
| Model Name | SmartCode Deadbolts Touchscreen |
| Item Model Number | 992700-011 |
| Lock Type | Keypad |
| Special Features | Alarm, Auto-Lock, Back-Lit Keypad, One-Touch Lock, Passcode Unlock |
| Material | Metal, Plastic, Zinc |
| Color | Matte Black |
| Item Dimensions (L x W x H) | 1 x 2.75 x 5.02 inches |
| Item Weight | 3.31 Pounds |
| Batteries Required | 4 AA batteries (not included) |
Image: A diagram illustrating the dimensions of the Kwikset SmartCode 270 exterior and interior assemblies, along with the adjustable latch backset.
Official Product Video
Video: An official Kwikset Corporation video titled "Kwikset Means Quality," showcasing the manufacturing process and quality assurance of Kwikset locks.
Warranty and Support
Kwikset products are backed by a manufacturer's warranty. For specific warranty details, claims, or technical assistance, please refer to the warranty information included with your product or visit the official Kwikset website. Customer support is available to assist with any questions or issues you may encounter.
