1. Introduction
Welcome to the Cheevalry X9 Pro Electric Scooter user manual. This guide provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new electric scooter. Please read this manual thoroughly before your first ride to ensure optimal performance and safety.
2. Safety Information
⚠️ Disclaimer: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.
- Always wear a helmet and other protective gear (knee pads, elbow pads) when riding.
- Ensure all components are securely fastened before each ride.
- Do not ride in heavy rain, on slippery surfaces, or in extreme weather conditions.
- Adhere to local traffic laws and regulations for electric scooters.
- Avoid riding under the influence of alcohol or drugs.
- Do not perform stunts or aggressive maneuvers.
- Keep hands and feet on the designated areas while riding.
- Children should only operate the scooter under adult supervision.
3. Product Overview
The Cheevalry X9 Pro is a robust adult electric scooter designed for city commuting, featuring a powerful motor, long-range battery, and comfortable riding experience.
Key Features:
- Powerful Motor: 1000W rated power for speeds up to 45 KM/H and 15° slope climbing ability.
- Long-Range Battery: 48V 21Ah ultra-large capacity battery with BMS protection, offering a range of 40-60km.
- Comfortable Ride: 10-inch pneumatic tires for anti-slip, wear-resistant, and long-lasting performance, complemented by front and rear suspension.
- Safety Features: Bright headlights and taillights, responsive mechanical disc brakes, and a burglar alarm.
- Convenience: Double folding design with a removable comfortable seat for easy transport and storage. NFC card unlock and LED instrument display for smart riding.
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | Cheevalry X9 Pro |
| Category | Two-wheel Scooter |
| Motor Power | 1000W |
| Voltage | 48V |
| Battery Capacity | 21Ah |
| Range Per Charge | 40-60km |
| Charging Time | 6-8 hours (Note: Some diagrams indicate 4 hours, please refer to the latest product documentation for precise charging times.) |
| Tire Size | 10 inch (Pneumatic) |
| Max Speed | 45 KM/H |
| Max Climbing Angle | 15° |
| Max Load | 120 KG |
| Net Weight | 28 KG |
| Dimensions (L x H x W) | 125cm x 120cm x 66cm (handlebar width) |
| Deck Height | 22cm |
| Suitable Rider Height | 120-190cm |
| Certification | CE |
5. Setup
5.1 Unboxing and Initial Inspection
- Carefully remove all components from the packaging.
- Check for any visible damage during transit.
- Ensure all parts listed in the packing list are present.
5.2 Assembly
- Unfolding the Scooter: Release the folding mechanism and carefully raise the stem until it locks into place. Ensure the locking mechanism is fully engaged.
- Handlebar Installation: Attach the handlebars to the stem, ensuring all cables are properly routed and not pinched. Secure with the provided screws.
- Seat Installation (Optional): If using the removable seat, insert the seat post into the designated slot on the deck and secure it. Adjust the seat height for comfort.
- Initial Charge: Before first use, fully charge the scooter's battery. Connect the charger to the charging port and then to a power outlet. The LED indicator on the charger will typically change color (e.g., red to green) when fully charged. Refer to Section 6.1 for charging details.
5.3 NFC Card Setup
Your scooter features NFC card unlock for enhanced security. Follow the instructions provided with your scooter to pair your NFC card(s) with the system. Typically, this involves placing the card near the NFC reader on the display while the scooter is in a pairing mode.
6. Operating Instructions
6.1 Charging the Battery
- Ensure the scooter is turned off before charging.
- Locate the charging port, usually covered by a rubber flap.
- Connect the charger to the scooter's charging port, then plug the charger into a standard wall outlet.
- The charger indicator light will show charging status (e.g., red for charging, green for fully charged).
- Charging time is approximately 6-8 hours. Do not overcharge.
- Always charge in a well-ventilated area, away from flammable materials.
6.2 Powering On/Off and Unlocking
- Power On: Press and hold the power button on the LED instrument display.
- NFC Unlock: Once powered on, tap your registered NFC card to the NFC reader on the display to unlock the scooter.
- Power Off: Press and hold the power button until the display turns off.
6.3 Riding the Scooter
- Starting: Place one foot on the deck and push off with the other foot to gain initial momentum. Once moving, gently press the throttle.
- Gear Selection: Use the gear selector button on the handlebar to switch between speed modes (e.g., 1, 2, 3) to match your riding conditions and desired speed.
- Braking: Use the mechanical disc brakes on the handlebars to slow down or stop. Apply both brakes gently and evenly for stable braking.
- Lights: Use the light switch on the handlebar to turn on/off the headlights and taillights for visibility.
- Loudspeaker: Use the loudspeaker button for alerts or warnings.
- Burglar Alarm: Activate the anti-theft burglar alarm via the remote control or display as per specific instructions.
7. Maintenance
7.1 General Cleaning
- Wipe the scooter with a damp cloth after each ride. Avoid using high-pressure water jets.
- Do not use abrasive cleaners or solvents that could damage the finish or electronic components.
7.2 Tire Maintenance
- Regularly check tire pressure and inflate to the recommended PSI (usually found on the tire sidewall).
- Inspect tires for wear, punctures, or damage before each ride.
7.3 Battery Care and Storage
- Store the scooter in a cool, dry place, away from direct sunlight and extreme temperatures.
- If storing for extended periods, charge the battery to approximately 50-70% and recharge every 1-2 months to prevent deep discharge.
- Never store the scooter with a completely depleted battery.
- Follow all safety warnings regarding potential fire risk during charging and storage.
7.4 Brake and Suspension Inspection
- Regularly check brake levers for proper tension and responsiveness.
- Inspect brake pads for wear and replace if necessary.
- Ensure the front and rear suspension components are clean and free from damage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Scooter does not power on | Low battery; Loose connections; Faulty power button | Charge battery; Check all visible connections; Contact support if issue persists |
| Motor not engaging | NFC not unlocked; Throttle issue; Motor connection problem | Ensure NFC is tapped; Check throttle cable; Contact support |
| Brakes feel weak | Worn brake pads; Loose brake cable; Air in hydraulic system (if applicable) | Inspect/replace brake pads; Adjust brake cable tension; Seek professional service |
| Unusual noises during ride | Loose components; Bearing wear; Debris in wheel/motor | Inspect all fasteners; Clean wheels/motor area; Contact support if noise persists |
9. User Tips
Based on general electric scooter user experiences, here are some tips to enhance your riding and ownership experience:
- Regular Tire Checks: Even with durable pneumatic tires, checking pressure weekly can prevent flats and improve ride quality.
- Brake Familiarization: Practice braking in a safe, open area to get a feel for the disc brakes' responsiveness.
- Battery Management: For optimal battery life, avoid completely draining the battery frequently. Charge it after each significant use.
- Folding Practice: Practice folding and unfolding the scooter a few times to become proficient, especially if you plan to transport it often.
- NFC Security: Keep your NFC card secure and consider having a backup if available.
10. Warranty and Support
For warranty information, service commitments, and technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.
The manufacturer offers a service commitment to ensure customer satisfaction. Details regarding specific warranty periods and coverage can be obtained from the seller.
