USER MANUAL
ELECTRIC SCOOTER PARAMETER
| PARAMETER | SPECIFICATION |
|---|---|
| BATTERY | 48V19.2AH(21700) |
| MOTOR | Front 500W + Rear 500W |
| MAX SPEED | 53KM/H |
| RANGE | 30-40KM |
| N.W/G.W | 29KG/34KG |
| LOAD CAPACITY | 150KG |
| BRAKES | Front and Rear Disc Brake |
| SUSPENSION | Front and Rear Suspension |
| LIGHTS | Front Lights, Rear Lights, Brake Lights |
| DISPLAY | Battery Indicator, Performance Mode, Speed |
| CARTON SIZE | 1185*245*515mm |
ELECTRIC SCOOTER COMPONENTS
The electric scooter features a folding mechanism with a folding knob. Key components include front and rear fenders, front and rear lights, front and rear motors, front and rear suspension, disc brakes with brake calipers, a charging port, and a kickstand. A light switch allows selection between ON:DUAL and OFF:SINGLE modes.
PACKING LIST
- Electric Scooter x1
- Charger x1
- Tool x1
- Manual x1
Folding and Unfolding
The scooter is designed for portability and can be folded for easy storage and transport, and unfolded into its riding configuration. The diagrams illustrate these two states.
Product Specification
The scooter's shell is constructed from ABS material. The transparent display window is made of high-hardness acrylic, offering durability comparable to toughened glass. The scooter supports a working voltage range of DC24V, 36V, 48V, 52V, 60V, or 72V, which can be automatically detected or manually set. Its functions include displaying speed, power, hitch, total mileage, and single mileage. It also offers control and setting capabilities for power, wheel diameter, idle automatic sleep time, backlight, startup mode, drive mode, voltage level, current limit, and USB charging.
Display and Communication
The scooter utilizes the UART communication protocol. The display provides real-time information including speed, power, hitch, total mileage (ODO), and single mileage (TRIP). It features a voltage level indicator, showing battery status from Low (L) to High (H). The multifunctional display area shows various indicators:
- ⚙️ GEAR: Indicates the current gear setting.
- ? Voltage Level: Displays battery charge status.
- START/NON/ZERO: Indicate start mode settings (e.g., zero start or non-zero start).
- ? (Headlight symbol): Indicates the headlight is turned on.
- ?️ (Cruise symbol): Indicates constant speed cruise is active.
- ❗ (Communication fault symbol): Alerts to communication errors.
- ? (USB symbol): Indicates USB charging is active.
The speed display area supports units of MPH and KM/H. Speed signals are derived from the motor's Hall signal and sent to the controller. The display calculates true speed based on wheel diameter and signal data. The motor's magnetic steel count may also need to be set.
Fault Codes
| Fault Code (Decimal System) | Fault Status | Remarks |
|---|---|---|
| 0 | Normal State | |
| E02 | Brake | |
| E03 | Power Sensor Failure (Riding Sign) | Not Implemented Here |
| E04 | 6km / h Cruise | |
| E05 | Real Time Cruise | |
| E06 | Battery Under Voltage | |
| E07 | Motor Failure | |
| E08 | Handle Failure | |
| E09 | Controller Failure | |
| E010 | Communication Reception Failure | |
| E011 | Communication Failure | |
| E012 | BMS Communication Failure | |
| E013 | Headlight Failure |
Settings
- P01: Backlight brightness
- Level 1 is darkest, Level 3 is brightest. Default: 3
- P02: Mileage unit
- 0: KM; 1: MILE. Default: KM
- P03: Voltage level
- Options: 24V, 36V, 48V, 52V, 60V. Default: 52V
- P04: Dormancy time
- 0 means no dormancy. Range: 1-60 minutes. Default: 5 minutes
- P05: Reserve
- P06: Wheel diameter
- Unit: inch. Accuracy: 0.1. Default: 10.0
- P07: Speed measuring magnetic steel number
- Range: 0-255. Default: 28
- P08: Rate-limiting
- Range: 0-100km/h. Default: 100
- P09: Zero start setting
- 0: Zero start. 1: Non-zero start. Default: 0
- P10: Reserve
- P11: EABS switch choose
- Range: 1-5. 0 means closing. 1 means weakest. 2 Means strongest.
- P12: Soft and hard start strength
- Range: 1-5. 1 is softest, 5 is hardest. Default: 3
- P13: Reserve
- P14: Reserve
- P15: Controller under-voltage setting
- P16: ODO Zero setting
- Keep pressing + for 5 seconds to clear ODO.
- P17: Cruise control enable
- 0: Cannot use cruise. 1: Can use cruise. Default: 0
- P18: Reserve
- P19: Reserve
- P20: Communication protocol
- Default is 4. Cannot be changed.
Introduction of Buttons and Interfaces
- When the scooter is shut down, long-press the ? button to turn on the power. When powered on, short-press the ? button to cycle through the ODO, TRIP, and VOL interfaces.
- When powered on, long-press the ? button to turn off the scooter. Short-press the ? button to change gear.
- Long-press the ? and [MODE] buttons to enter the menu for changing the interface.
- To enter the setting interface, short-press the ? button to change parameters. Short-press or long-press the ? button to add or reduce the numerical value. After changing, short-press the ? button to move to the next numerical value. After changing, long-press the ? and [MODE] buttons to exit the interface, or wait 8 seconds for automatic saving and exit.
- Motor speed is regulated by Up and Down controls. Motor speed increases when moving Up; releasing the control returns the speed to zero.
