Chuboor PJ08

Chuboor PJ08 Air Purifier User Manual

Model: PJ08 | Brand: Chuboor

1. Important Safety Instructions

READ AND SAVE THESE INSTRUCTIONS

This product should only be used in accordance with the specifications described in this manual. Any use other than specified herein may result in serious injury.

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

  • Read all instructions before using the appliance.
  • To avoid fire or electric shock hazards, plug the appliance directly into a suitable AC power outlet.
  • To avoid fire hazards, NEVER place the cable under carpets, near heating grilles, radiators, stoves, or heaters.
  • To avoid electrical hazards, DO NOT immerse it in water or other liquids. Do not use near water or in wet or damp locations.
  • Children cannot recognize the dangers associated with the use of electrical appliances. For this reason, always supervise children when they are near the unit.
  • Always unplug the air purifier before moving it, opening the grille, changing filters, cleaning it, or whenever the air purifier is not in use. Be sure to pull the plug, not the cord.
  • NEVER drop or insert objects into openings.
  • DO NOT run the cable under carpeting.
  • DO NOT cover the cable with rugs or similar coverings.
  • DO NOT run the cable under furniture or appliances; place it away from traffic areas where it could be tripped over.
  • DO NOT use the appliance if the cable or plug is damaged, if the motor fan does not rotate, if the appliance malfunctions, or if it has been dropped or damaged in any way.
  • The use of the appliance for other purposes is not recommended, as it may cause fires, electric shocks, or personal injuries.
  • DO NOT use outdoors.
  • DO NOT place anything on top of the unit.
  • NEVER block air openings, grille/outlets, or place the unit on a soft surface, such as a bed or sofa, as this could cause the unit to tip over, blocking the air inlet or outlet.
  • DO NOT attempt to repair or adjust any electrical or mechanical function of this unit. Otherwise, the warranty will be void. The inside of the unit contains no user-serviceable parts. All repairs must be performed only by qualified personnel.
  • Keep the appliance on a level surface.
  • To avoid the danger of suffocation, keep it away from children.
  • Refer to the safety instructions in the manual for more information.

2. Product Features

The air purifier is designed to capture 99.97% of dust, pollen, pet dander, smoke, mold spores, and household odors, allowing you to breathe easily.

  • Multi-stage Filtration: The pre-filter captures larger airborne particles like human hair, pet dander, and dust. The activated carbon filter removes large dust particles, pet dander, and household odors. The HEPA filter traps up to 99.9% of contaminants as small as 0.3 microns, such as pollen and dust mites, and filters PM2.5 air pollution.
  • 3 fan speeds
  • 3 timer settings
  • Child lock function
  • Smart control (App & Voice Control)
  • Anion purification function
  • Auto/Sleep mode
  • Filter reset indicator

The PJ08 model offers enhanced features compared to other air purifiers:

Comparison of PJ08 Air Purifier features versus other air purifiers

Image: Comparison highlighting PJ08's pet-friendly design, 5 purification modes, 4-stage filtration, timing mode, child lock, sleep mode, app control (Siri, Alexa, Google Assistant), air quality indicator, PM2.5 display, and filter replacement indicator, contrasting with typical air purifiers.

3. What's in the Box

  • 1 × Chuboor PJ08 Air Purifier
  • 1 × HEPA Filter (Pre-Installed)
  • 1 × Power Adapter
  • 1 × User Manual
  • 1 × Pet Hair Trapping Layer (Extra)
  • 1 × Pet Sticker

Note: To protect the HEPA filter, it is wrapped in a plastic bag before shipping. Be sure to remove the plastic bag before installing and turning on the air purifier for the first time.

4. Product Diagram

Chuboor PJ08 Air Purifier with control panel and air ventsChuboor PJ08 Air Purifier in black with control panel and air vents

Images: Front view of the Chuboor PJ08 Air Purifier in white and black, showing the overall design and air intake/outlet.

Control Panel Overview

Top-down view of the air purifier control panel with air quality indicator

Image: Top-down view of the control panel, showing the digital display for PM2.5, Wi-Fi indicator, fan speed, timer, child lock, and power button.

Key Components:

  1. Touch Control Panel
  2. Sensor
  3. Air Outlet
  4. Power Cable Interface
  5. Air Inlet

Control Panel Functions:

  1. Reset Button
  2. PM2.5 Index (Wi-Fi version)
  3. Button
  4. Child Lock
  5. Automatic Mode
  6. Sleep Mode
  7. Button
  8. Timer Button
  9. Wi-Fi (A models only)
  10. Air Quality Light Ring

5. Setup

Pre-Operation Instructions:

  1. Carefully remove the air purifier from its packaging box and plastic bag.
  2. Remove the filter and adapter from the air purifier, remove the protective plastic, and insert the filter into the unit.
  3. Place the unit on a firm, level, and flat surface.
    • For proper airflow, place the unit at a minimum distance of 30 cm from any wall or furniture.
    • Ensure that none of the grilles are blocked.
  4. Plug the power adapter into a suitable AC power outlet. A beep will sound, and the power icon will light up and remain steady. The appliance enters standby mode.

IMPORTANT:

  • When moving the air purifier, always lift it firmly with both hands and place it carefully on a flat and level surface.
  • Do not use any power adapter other than the one supplied with the unit.

6. Operating Instructions

Power Button (Power icon)

Press and hold the button for 3 seconds to turn the air purifier on/off. To deactivate the ambient light, press the button twice.

Fan Speed Button (Fan speed icon)

When the air purifier is on, press to adjust the 3 fan speed levels and cycle through 1-low, 2-medium, 3-high, automatic, and sleep modes. The corresponding speed level will illuminate when selected.

Child Lock Function (Child lock icon)

Press and hold the button for 3 seconds to activate the child lock function. When activated, the indicator light turns red. To deactivate, press and hold the button for 3 seconds again, and the indicator light will turn white.

Anion Purification Function

The air purifier is equipped with a high-energy negative ion generator that continuously produces negative ions. These ions effectively gather indoor floating dust, smoke, and bacteria, causing them to fall quickly and purify the air, thus posing no threat to human health.

Smart Control (APP & Voice Control)

Use your air purifier with the "pjrobot" app. Download the "pjrobot" app for more air purifier functions.

Before you start, make sure that:

  • Your smartphone is connected to a Wi-Fi network.
  • Your smartphone runs iOS 10.0 (or higher) or Android 5.0 (or higher).
  • The 2.4 GHz band wireless signal is active on your wireless router.
  • Ensure the air purifier is powered on during installation.
  • Ensure your phone's Bluetooth is enabled and the app has access to your Bluetooth permissions.
  1. Download "pjrobot" from the App Store (iOS devices) or Google Play (Android devices).
  2. Open the app and create a user account.
  3. During Wi-Fi network setup, press and hold the Wi-Fi icon for 3 seconds and listen for a "beep" to connect.
  4. Press the "+" or "Add device" icon to find Small Home Appliances and select Wi-Fi air purifier.
  5. Follow the App's instructions to configure the Wi-Fi connection.

Wi-Fi Status Light:

Indicator LightStatus
Solid RedNot connected, Waiting to connect
Flashing RedConnecting, Waiting to connect
Solid WhiteConnected

Attention:

If you have any problems during the Wi-Fi setup process, refer to the "Troubleshooting" section of this user manual.

Timer Button (Timer icon)

When the air purifier is on, press to set a timer for 2H, 4H, or 8H, or to deactivate the timer. When a timer is selected, the corresponding timer indicator will light up. Note: Only 3 timer settings are supported.

Power-off Memory Function

If a sudden power outage occurs during air purifier operation, it can return to its previous operating state once power is restored (Note: Time settings, child lock, and sleep mode do not have memory functions).

7. Maintenance

General Cleaning

Clean the air purifier at least once a month with a clean, dry, soft cloth or a vacuum cleaner. More frequent cleaning may be necessary depending on environmental conditions.

Important Notes:

  • DO NOT insert foreign objects or fingers into the appliance.
  • DO NOT use gasoline, benzene, or other abrasive or strong cleaning products on and/or in the appliance during cleaning, as they will damage the product.
  • NEVER use alcohol or other solvents.

Filter Maintenance and Replacement

The air purifier is equipped with a filter life detection system that activates a red flashing indicator light when the filter element has reached the end of its useful life and requires replacement.

Video: This video explains why air purifiers need regular filter replacement, how to determine when to replace the filter based on usage time, indicator lights, and air quality tests, and how to choose the correct filter for optimal performance.

Filter Replacement Steps:

Four steps to change the air purifier filter

Image: Diagram showing the four steps for filter replacement: 1. Turn unit upside down and rotate base counter-clockwise. 2. Remove plastic bag from new filter and replace old one. 3. Twist cover clockwise to lock. 4. Press and hold "Filter" icon for 5 seconds to reset filter life.

  1. Before replacing the filter, disconnect the power adapter and place the air purifier upside down on a table.
  2. Rotate the air inlet grille counter-clockwise and remove it.
  3. Replace the old filter with a new one.
  4. Follow the arrow direction on the bottom cover and twist it clockwise to secure it in place.
  5. After replacing the filter, turn on the device and press the reset button. If the indicator light and ambient light flash while two beeps are heard, it indicates that the filter has been successfully reset.

Warm Tip:

It is recommended to replace the filter element every three months for optimal health benefits.

Why use original HEPA filters?

Comparison of original HEPA filter vs third-party filter

Image: Illustrates the benefits of original filters (clean air, longer use, reliable service, 99.97% efficiency, 90% odor reduction) compared to third-party filters (60% efficiency, 30% odor reduction, poor performance).

Original filters ensure clean air, longer lifespan, and reliable service. Activated carbon filters should have good adsorption performance. For HEPA filters, be sure to choose a genuine H13 standard certified filter. Our filter is certified to the H13 True HEPA standard, capturing 99.95% of airborne particles down to 0.3 microns.

You can find replacement filters here: Chuboor PJ08 H13 Filter Link

8. Troubleshooting

Before performing the following checks, unplug the appliance from the power outlet.

ProblemPossible Solution
The unit does not start.
  • Check that the plug is connected to a power outlet and that it is switched on.
  • Check that the air purifier is correctly assembled.
  • Check that the filter is correctly in place.
The unit turns off accidentally.
  • The air purifier automatically restarts and returns to the previous mode when power is restored.
Insufficient airflow.
  • Check that the filters are clean.
  • Check for obstructions in the air inlet and/or outlet.
Excessive noise.
  • Check that there are no foreign objects in contact with the fan.
  • Check if the filter is clogged and ready for replacement.
  • Check that the air purifier is correctly assembled and that the locking knob is tight.
  • Check that the unit is on a level surface.
The air purifier produces an unpleasant odor.
  • The first few times you use the air purifier, it may produce a plastic odor. This is normal. The air purifier may also produce an unpleasant odor when the filter is dirty. In this case, clean or replace the appropriate filter.
  • However, if the appliance emits a burning smell even after the filter has been removed, stop using it and contact our customer service immediately.
The air purifier still indicates that I need to replace a filter, but I already did.
  • Press and hold the Filter button for 3 seconds after changing. If the Filter button still indicates, please contact our service.
Cannot connect Wi-Fi.
  • Configure the router to ensure that the "username" and "password" entered are correct.
  • Make sure the device is within the coverage of the router's network signal.
  • The device can only be configured when in standby mode. Press the Wi-Fi button for 3 seconds, listen for the message, which means the device is entering configuration mode.
  • Configure the access network to the 2.4G network when networking.
  • Please go to the iOS or Google Play store to download the "pjrobot" App.

9. Specifications

AttributeValue
ModelPJ08
Product NameAir Purifier
Power (W)32W
InputDC24V
Adapter Input100-240V~50/60Hz 1.0A
Adapter Output24V 1.0A
Noise Level≤50dB (3-Level high speed)
Particle Purification EfficiencyHigh
Formaldehyde Purification EfficiencyHigh
Dimensionsφ208*290mm
Net Weight2.3kgs
Coverage Area18㎡~35㎡ (194 sq ft - 377 sq ft)
Operating Conditions-4°C-70°C/25°F-148°F (20%-90%, non-condensing)
Storage Conditions-4°C-70°C/25°F-148°F (20%-90%, non-condensing)
Oxygen SupplyAbove 5L/min
Formaldehyde Removal Rate83.00%
Benzene Removal Rate90.00%
Wind SpeedStandard
Power Supply TypeAlternating Current (A.C. Source)
StyleAir Purifier
Capacity (CFM)108ft³/min
Usage ConditionHousehold
Anion Density500000pcs/m³
CertificationGS, CE
Filter TypeHEPA Filter (Hepa H13)
InstallationPortable
FunctionDeodorization, Purify the air, Monitoring PM2.5, Remove odor
Air Volume51-150m³/h
Voltage100-240V
OriginMainland China
Air Filtration %Removes 99.97% of dust, pollen, smoke, odors, and pet dander.
SupportWifi

Product Series Comparison (PJ-01/02, PJ-03/05, PJ-08/09)

FeaturePJ-01A/02APJ-03A/05APJ-08A/09A
ColorBlack/WhiteBlack/WhiteBlack/White
ModeAuto & SleepAuto & SleepAuto & Sleep
Filter Indicator ReminderRed alert to replace. Wifi version shows remaining filter life.Red alert to replace. Wifi version shows remaining filter life.Red alert to replace. Wifi version shows remaining filter life.
Child Lock
Cartridge Reset
Timer
Anion Purification
PM2.5 Index (A models)
PM2.5 Index (B models)XXX
Wifi (APP) (A models)
Wifi (APP) (B models)XXX

Voice Control:

Alexa, Google Home Assistant, Siri (Wi-Fi version)

Warm Tips:

Different product models have different functions. If you need Smart APP control, please choose PJ series A models.

10. User Tips

  • Optimal Placement: For best performance, ensure the air purifier is placed at least 30 cm away from walls and furniture to allow for proper 360° air intake and circulation.
  • Pet-Friendly Homes: The PJ08 is specifically designed for homes with pets. Utilize the pet hair adsorption layer to efficiently capture pet fur and maintain filter longevity.
  • Smart Control Convenience: Leverage the "pjrobot" app for remote control, real-time air quality monitoring, and scheduling. This allows for hands-free operation and smart purification based on your needs.
  • Regular Filter Checks: Pay attention to the filter indicator light and the app's filter life monitor. Replace the filter every 3-6 months, or more frequently in heavily polluted environments, to maintain purification efficiency.
  • Quiet Operation: For undisturbed sleep, activate the Sleep Mode, which operates at a low noise level of 25dB.
  • Child Safety: Use the Child Lock function to prevent accidental changes to settings by children or pets.

11. Warranty and Support

Warranty Coverage:

The original manufacturer offers a limited 1-year warranty and a 2-year warranty for electronic components.

Limited Warranty:

This limited warranty applies only to the repair or replacement of any part manufactured or supplied with this product which, after inspection by our authorized personnel, is found to have failed under normal use due to a defect in material or workmanship. Our sole responsibility under this limited warranty is, at our sole discretion, to repair or replace the duly registered product (or the defective part) with the same model or a comparable model within a reasonable time, subject to the following exclusions, limitations, statutory rights, and warranty claim procedures. This limited warranty is exclusive, and we expressly disclaim all other warranties or additional warranties, whether written or oral, express or implied, including, but not limited to, warranties of merchantability, manufacture, or fitness for a particular purpose.

Exclusions:

This limited warranty does not apply, or is void, to any product or part damaged by:

  1. Accident, misuse, abuse, lack of reasonable care, or normal maintenance;
  2. Installation or operation under conditions other than those recommended by the factory;
  3. Submitting the product to a voltage other than that specified;
  4. Maintenance or disassembly by unauthorized personnel;
  5. Deletion or alteration of the serial number;
  6. Modifying the original factory-assembled appliance in any way.

B. THIS LIMITED WARRANTY DOES NOT APPLY TO SHIPPING COSTS OF PRODUCTS TO OR FROM THE FACTORY OR DESIGNATED SERVICE CENTER UNDER WARRANTY CLAIMS, NOR TO DAMAGES INCURRED DURING ANY SHIPMENT.

C. This limited warranty does not apply to installation, disassembly, reinstallation, and/or related costs. This limited warranty does not apply to replaceable filters and high-energy grid wires.

Limitations:

The factory shall not be liable for material, accessory, and/or indirect damages of any kind, and, unless otherwise provided by applicable state law, the factory shall not be liable for personal injury damages resulting from malfunctions, defects, misuse, improper operation or installation, or modification of a factory product or part thereof. The sole remedy for breach of this limited warranty is repair or replacement of the defective product. In no event shall liability under any other remedy prescribed by law exceed the purchase price of the product.

Statutory Rights:

This limited warranty, subject to the exclusions and limitations set forth above, grants you specific legal rights in addition to any statutory rights you may have under applicable state law.

However, some states do not allow the limitation or exclusion of incidental or consequential damages, so this limitation may not apply to you.

Compliance:

SymbolDescription
CECompliance with all requirements of applicable CE directives.
Waste electrical and electronic equipment symbolElectrical products must not be disposed of with household waste and must be recycled at designated collection points. Contact local authorities or your dealer for advice on recycling.

This user manual may be modified from time to time without prior notice. It may be modified or revised.

Manufactured in China

Executive Standard: Q/PJZN1-2021

Compliance logos: CE, FC, RoHS, UKCA, PSE

Image: Various compliance and certification logos.

Related Documents - PJ08

Preview Benutzerhandbuch für den NexiGo Nova Mini Laserprojektor
Umfassendes Benutzerhandbuch für den NexiGo Nova Mini Laserprojektor (PJ08). Enthält Anleitungen zur Einrichtung, Bedienung, Fehlerbehebung, Wartung und technische Daten. Erfahren Sie, wie Sie Ihr Heimkinoerlebnis mit diesem intelligenten Google TV-Projektor optimieren.
Preview Manuale Utente NexiGo Nova Mini PJ08: Guida Completa
Scopri come configurare, utilizzare e mantenere il tuo proiettore laser intelligente NexiGo Nova Mini PJ08 con questa guida completa. Include istruzioni per la messa a fuoco, correzione Keystone, connessioni, casting e risoluzione dei problemi.
Preview Manuel d'utilisation du projecteur laser intelligent NexiGo Nova Mini (PJ08)
Guide complet pour l'installation, l'utilisation et la maintenance du projecteur laser intelligent NexiGo Nova Mini avec Google TV. Inclut des instructions de sécurité, des spécifications techniques, des conseils de dépannage et des informations sur la connectivité.
Preview NexiGo Nova Mini Smart Laser Projector User Manual
Comprehensive user manual for the NexiGo Nova Mini Smart Laser Projector (PJ08), covering setup, operation, safety, troubleshooting, and specifications. Learn how to connect, use features like Google TV, and maintain your projector.