1. Introduction
Thank you for choosing the North Bayou NB-F5 RGB Phantom Heavy-Duty Single Monitor Arm. This premium monitor arm is designed to enhance your workspace with superior adjustability, robust support, and dynamic RGB lighting. It is compatible with monitors ranging from 32 to 60 inches and can support weights up to 20kg, making it ideal for high-end gaming and professional setups. This manual provides essential information for safe installation, operation, and maintenance of your monitor arm.
2. Safety Information
- Read all instructions carefully before assembly and use.
- Do not exceed the maximum weight capacity of 20kg (44 lbs).
- Ensure your desk surface is strong enough to support the combined weight of the monitor arm and your monitor.
- Verify that the VESA mounting holes on your monitor are compatible (75x75mm or 100x100mm).
- Keep children and pets away during installation.
- Use only the provided hardware and tools.
- If any parts are missing or damaged, contact customer support immediately.
3. Package Contents
The North Bayou NB-F5 monitor arm comes with all necessary components for installation. While specific contents may vary slightly, you can expect the following:
- Monitor Arm Assembly (pre-assembled for easy setup)
- Desk Clamp Base
- Grommet Mount Hardware
- Detachable VESA Plate
- Monitor Mounting Screws (various sizes)
- Cable Management Clips/Covers
- Hex Keys / Adjustment Tools
- User Manual
4. Specifications
| Feature | Detail |
|---|---|
| Model | NB-F5 |
| Material | Aluminum Alloy / ABS |
| Compatible Monitor Size | 81-152cm (32-60 inches) |
| Weight Capacity | 2-20kg (4.4-44 lbs) |
| VESA Compatibility | 75x75mm, 100x100mm |
| Max Height Adjustment | 500mm |
| Max Arm Extension | 630mm |
| Tilt Angle | ±50° |
| Swivel (Left/Right) | ±90° |
| Rotation (Middle/Bottom Joint) | 360° |
| Features | RGB Lighting, Detachable VESA Plate, Mechanical Spring, Anti-corrosion treatment |
5. Setup Instructions
The NB-F5 monitor arm is designed for easy installation, often arriving pre-assembled. Follow these steps to set up your monitor arm:
5.1. Pre-Installation Checks
- Desk Compatibility: Ensure your desk meets the requirements for either clamp or grommet installation.
- Monitor VESA: Check your monitor's VESA mounting pattern (75x75mm or 100x100mm).
5.2. Choose Installation Method
The NB-F5 supports two installation methods: Desk Clamp and Grommet Mount.
Desk Clamp Method:
- Desk Thickness: 20-80mm
- Desk Edge Depth: 50mm or more required for secure clamping.
Grommet Mount Method:
- Desk Thickness: 20-80mm
- Desk Hole Diameter: 10-60mm
5.3. Attaching the Monitor
- Attach the detachable VESA plate to the back of your monitor using the appropriate screws.
- Once the monitor arm base is securely installed on your desk, slide the monitor (with the attached VESA plate) onto the arm's mounting head. The smart lock mechanism will secure it in place.
6. Operating Instructions
The NB-F5 monitor arm offers extensive adjustability for optimal viewing comfort.
6.1. Adjusting Monitor Position
- Height Adjustment: Gently push or pull the monitor up or down to achieve the desired height. The mechanical spring allows for smooth vertical movement up to 500mm.
- Tilt: Tilt the monitor screen up or down by ±50° to reduce glare and find your preferred viewing angle.
- Swivel: Rotate the monitor left or right by ±90° at the VESA plate joint.
- Rotation: The middle and bottom joints of the arm allow for a full 360° rotation, providing maximum flexibility for screen orientation (landscape to portrait).
- Extension/Retraction: Extend the arm up to 630mm or push it closer to the desk to optimize viewing distance.
6.2. RGB Lighting Control
The NB-F5 features dynamic RGB lighting on the arm and base. Control the lighting effects and colors with a one-touch button, typically located on the base or arm. Cycle through various modes to match your gaming setup or personal preference.
Video showcasing the RGB lighting effects, flexible adjustments, and various color options of the North Bayou NB-F5 RGB Phantom Monitor Arm.
7. Maintenance
7.1. Cleaning
Wipe the monitor arm with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the finish or RGB components.
7.2. Cable Management
Utilize the integrated cable management system to keep your cables tidy and prevent tangles. Route cables through the designated clips or covers along the arm for a clean and organized workspace.
8. Troubleshooting
- Monitor Sags or Doesn't Hold Position: The gas spring tension may need adjustment. Use the provided hex key to turn the tension screw (usually located on the arm joint) clockwise to increase tension for heavier monitors, or counter-clockwise to decrease tension for lighter monitors. Adjust gradually until the monitor holds its position.
- Arm is Too Stiff to Move: The gas spring tension might be too high. Turn the tension screw counter-clockwise to loosen it.
- Monitor Wobbles: Ensure all mounting screws and the desk clamp/grommet are securely tightened. Check that the VESA plate is firmly attached to the monitor and the arm.
- RGB Lighting Not Working: Check the power connection for the RGB lights. Ensure the one-touch control button is functioning correctly.
9. User Tips
- Optimal Ergonomics: Position your monitor so the top of the screen is at or slightly below eye level. Your eyes should be about an arm's length from the screen.
- Cable Management: Take advantage of the integrated cable management to keep your desk clutter-free. This not only looks better but also prevents cables from getting snagged during adjustments.
- Regular Checks: Periodically check all screws and connections to ensure they remain tight, especially after initial installation and significant adjustments.
- RGB Customization: Experiment with the RGB lighting modes to match your mood or the aesthetic of your gaming setup.
10. Warranty and Support
For warranty information, technical support, or replacement parts, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
