NB North Bayou F160 Flexi Full Motion Desk Mount Installation Guide

Important Safety Information and Warnings

Severe personal injury and property damage can result from improper installation or assembly.

• Products must be installed by a professional or qualified installer.
• If you do not understand the instructions or have concerns, contact a qualified local installer.
• Do not install or assemble if the product or hardware is damaged or missing. Contact your local distributor for replacement parts.
• For safe installation, the desk must support a minimum of 3 times the total weight of the mount, monitor, and accessories.
• Do not use this product for other than its original design.
• This product contains moving parts; use with caution.
• When installing the monitor, do not damage electrical wiring or power sources.
• Installation and routing of monitor cables must comply with electro-technical regulations.
• Mains and data cables must be secured against twisting, squeezing, or shearing.
• The manufacturer is not responsible for the desk of mounting or incidental/consequential damages.
• The manufacturer disclaims liability for modifications, improper installation, or installation over the specified weight range.
• This product is designed for indoor use only.
• ▲ High Pressure Gas Spring: Prohibited from fire and percussion. Strictly prohibited to dismantle without professionals. Return to manufacturer or hand over to professional agencies if abandoned. For optimal performance, adjust the product arm in full direction several times per month.
• All images are for reference only; the product in kind prevails.
• The manufacturer reserves the right to modify or alter instructions without formal notice.

Part List

Symbols Guide

• + [Increase Torque]
• - [Decrease Torque]
• → [Direction of Tightening/Loosening]
• ⚙️ [Hex Wrench]
• ? [Phillips Screwdriver]
• ?️ [By Hand]
• ✏️ [Pencil]
• ✔️ [Optional]
• ❌ [Remove]
• ? [Note]
• ⚠️ [Warning]

Installation Methods

A. Table Edge Installation

Step 1: Attach the clamp base to the edge of the table. Ensure it is securely fastened.

Diagram showing the clamp base being attached to a table edge.

Step 2: Insert the main arm into the base.

Diagram showing the main arm being inserted into the clamp base.

Step 3: Secure the arm in the base.

Diagram showing the securing mechanism for the arm in the base.

B. Grommet Installation

Step 1: Place the grommet base over the desk grommet hole.

Diagram showing the grommet base positioned over a desk hole.

Step 2: Insert the bolt through the base and the desk hole, securing it from underneath.

Diagram showing the bolt passing through the base and desk, with a nut or plate underneath.

Step 3: Tighten the bolt to secure the mount to the desk.

Diagram showing the bolt being tightened.

A. USB Lines Installation (Optional)

Step 1: Route USB cables through the designated channels on the mount arm.

Diagram showing USB cables being routed along the arm.

Step 2: Connect the cables as needed. Note: USB lines are not supplied.

Diagram showing the connection points for USB cables.

Mounting the Display

C. Power and Display Lines Installation

Follow the diagrams to route power and display cables neatly along the arm, ensuring they are secured and do not impede movement.

Diagrams illustrating the routing of power and display cables along the various sections of the desk mount arm.

D. Display Installation

Step 1: Attach the VESA plate to the back of your monitor using the appropriate screws (A or B, with washers D or E as needed, depending on monitor thread size).

Diagram showing the VESA plate being attached to a monitor using screws and washers.

Step 2: Mount the monitor with the attached VESA plate onto the desk mount arm. Ensure it clicks or locks into place securely.

Diagram showing the monitor being attached to the desk mount arm.

Warning: Ensure screws are secured firmly.

Arm Adjustments

E. Torque Adjustment

This adjustment controls the tension of the gas spring arm, affecting how easily the monitor can be moved up or down and how well it stays in position.

Instructions:

1. Ensure the display has been put onto the mount.
2. Read your display packaging or manual to find out the display's net weight.
3. Ensure the display's net weight is between 4.4-14.3lbs (2.0-6.5kg).
4. If the display lifts up automatically after installation: One person should press down on the screen while another uses the 5mm Allen key (G) to turn the set screw on the underside of the upper arm joint. Turn the screw in the direction indicated by '-' (counter-clockwise) to reduce torque until the display can be hovered at any position.
5. If the display sinks to the lowest position after installation: Repeat the procedure from step 4, but turn the set screw in the direction indicated by '+' (clockwise) to increase torque until the display can be hovered at any position.

Diagram showing the torque adjustment screw and the '+' and '-' directions for adjustment.

Warning: Do not adjust tension without putting on the display.

F. Setting Tilt Angle Position

Adjust the tilt angle of the monitor to your preferred viewing position. The arm supports tilt adjustments within a range of approximately +35° to -50°.

Diagram showing the tilt adjustment mechanism and the range of motion.

G. Swivel Adjustment

The arm allows for swivel movement, enabling you to position the monitor left or right.

Diagram showing the swivel point of the arm.

H. Display Rotation

The mount supports 360° rotation of the display, allowing for portrait or landscape orientation.

Diagram showing the display being rotated 360 degrees.

Note: Only displays with a central gravity point will have the best performance.

Adjustable Parameters Summary

The mount offers various adjustments for optimal positioning:

• Rotation: 360°
• Swivel: 180° (left/right)
• Tilt: +35° / -50°
• Arm Extension: Up to 250mm
• Vertical Adjustment Range: 0~95mm (for table edge)
• Vertical Adjustment Range: 0~95mm (for grommet)

For table edge and grommet installations, ensure screws are secured firmly.

Max Load: 4.4~14.3lbs (2~6.5kg) Single