SN30 Pro+ Bluetooth Gamepad
SN30 Pro+ Bluetooth Gamepad

 

  • Press start to turn on the controller.
  • Press & hold start for 3 seconds to turn off the controller.

Switch

  1. press & hold Y & start to turn on the controller then press pair button for 3 seconds to enter its pairing mode. LED starts to rotate from left to right.
  2. go to your Switch Home Page to click on Controllers, then click on Change Grip/Order. LED becomes solid when connection is successful.
  3. controller will auto reconnect to your Switch with the press of start once it has been paired.
    • when connected to your Switch, star button= Switch Screenshot button, home button= Switch HOME button.

Android CD – input)

  1. press & hold B & start to turn on the controller then press pair button for 3 seconds to enter its pairing mode. LED starts to rotate from left to right.
  2. go to your Android device’s Bluetooth setting, pair with [BBitDo SN30 Pro+]. LED becomes solid when connection is successful.
  3. controller will auto reconnect to your Android device with the press of start once it has been paired.
    • USB connection: connect your SB it Do controller to your Android device via USB Cable after step 1.

Windows (X – input)

  1. press & hold X & start to turn on the controller then press pair button for 3 seconds to enter its pairing mode. LED starts to rotate from left to right.
  2. go to your Windows device’s Bluetooth setting, pair with [BBitDo SN30 Pro+]. LED will become solid when connection is successful.
  3. controller will auto reconnect to your Windows device with the press of start once it has been paired.
    • USB Connection: connect your 8BitDo controller to your Windows device via USB Cable after step 1.

macOS

  1. press & hold A & start to turn on the controller then press pair button for 3 seconds to enter its pairing mode. LED starts to rotate from left to right.
  2. go to your macOS device’s Bluetooth setting, pair with [Wireless Controller]. LED becomes solid when connection is successful.
  3. controller will auto reconnect to your macOS device with the press of start once it has been paired.
    • USB connection: connect the controller to your macOS device via USB cable after step 1.

Turbo function

  1. hold the button you would like to set turbo functionality to and then press the star button to activate/deactivate its turbo functionality.
    • d-pad and analogue sticks are not included.
    • this does not apply to Switch mode.

Battery

status →→→→→→→→→→→→→ LED indicator
low battery mode →→→→→→→→ Red LED blinks
battery charging →→→→→→→ Red LED stays solid
battery fully charged→→→→→→→→LED turns off

  • two double A batteries with 20 hours of play time.
  • 20 hours of play time with a rechargeable battery pack.
  • rechargeable with 4 hour charging time.

Power Saving

  • 1 minute with no Bluetooth connection, will power off.
  • 15 minutes with Bluetooth connection but no use, will power off.

Support

Please visit support.8bitdo.com for further information & additional support.

SN30 Pro Bluetooth Gamepad User Manual – Optimized PDF
SN30 Pro Bluetooth Gamepad User Manual – Original PDF

Leave a comment

Your email address will not be published.