I-Winsen ZPH05 Micro Dust Sensor
Isitatimende
Leli lungelo lokukopisha lemanuwali lingeka-Zhengzhou Winsen Electronics Technology Co., LTD. Ngaphandle kwemvume ebhaliwe, noma iyiphi ingxenye yale manuwali ngeke ikopishwe, ihunyushwe, igcinwe ohlelweni lwe-databaseorretrieval system, futhi ayikwazi ukusatshalaliswa nge-electronic, ukukopisha, izindlela zokurekhoda. Siyabonga ngokuthenga umkhiqizo wethu. Ukuze uvumele amakhasimende ayisebenzise kangcono futhi wehlise amaphutha abangelwa ukusetshenziswa kabi, sicela ufunde imanuwali ngokucophelela futhi ulisebenzise ngendlela efanele ngokuhambisana nemiyalelo engaphakathi. Uma abasebenzisi bephula imigomo noma besusa, beqaqa, beshintsha izingxenye eziseceleni kwenzwa, ngeke sibe nesibopho sokulahlekelwa. Okuthile okufana nombala, ukubukeka, osayizi nokunye, sicela ngomusa kuyanqoba. Sizinikela ekuthuthukisweni kwemikhiqizo kanye nokuqanjwa kabusha kwezobuchwepheshe, ngakho sigodla ilungelo lokuthuthukisa imikhiqizo ngaphandle kwesaziso. Sicela uqinisekise ukuthi iyinguqulo evumelekile ngaphambi kokusebenzisa leli bhukwana. Ngasikhathi sinye, ukuphawula kwabasebenzisi ekusetshenzisweni okulungiselelwe kwamukelekile. Sicela ugcine imanuwali ngendlela efanele, ukuze uthole usizo uma unemibuzo ngesikhathi sokuyisebenzisa esikhathini esizayo.
UProfile
Inzwa yamukela isimiso sokuphambana kwe-optical, engakwazi ukubona ngokunembile futhi ngokushesha izinga lothuli nokuthuthwa kwendle endleleni ye-optical. Inzwa isikhulile futhi yalinganiswa ngaphambi kokuthunyelwa, inokuvumelana okuhle nokuzwela.
Izici
- Thola ngokunembile izinhlayiya ezahlukene
- Khipha inani lezinhlayiya
- Ukusabela okusheshayo
- I-alamu engavamile yokuvinjwa kwendlela
- Kuhle ukulwa nokuphazamiseka *Usayizi omncane
Izinhlelo zokusebenza
- I vacuum cleaner
- I-Scrubber *Isilawuli se-Dust Mite
- Irobhothi elishanelayo
- I-Range Hood
Imingcele Yezobuchwepheshe
| Imodeli | ZPH05 | |
| Ukusebenza voltagibanga | 5±0.2 V (DC) | |
| Imodi Yokukhipha | UART, PWM | |
| Isignali yokuphumayo voltage | 4.4 ± 0.2 V | |
| Ikhono lokubona | Izinhlayiya ezincane kunazo zonke 10 μm ububanzi | |
| Ububanzi bokuhlolwa | 1-4 amabanga | |
| Isikhathi sokufudumala | ≤2s | |
| Ukusebenza kwamanje | ≤60mA | |
| Ububanzi Bomswakama | Isitoreji | ≤95%RH |
| Iyasebenza | ≤95%RH (okungafinyeleli) | |
| Izinga Lokushisa | Isitoreji | -30℃～60℃ |
| Iyasebenza | 0℃～50℃ | |
| Usayizi (L×W×H) | 24.52×24.22×8.3 (mm) | |
| Ukubonakalayo okubonakalayo | I-EH2.54-4P(Isokhethi yetheminali) | |
Ubukhulu
Incazelo yomgomo wokutholwa kwenzwa
Izikhonkwane Incazelo
| Izikhonkwane Incazelo | |
| Phina 1 | +5V |
| Phina 2 | GND |
| Phina 3 | I-TXD/PWM |
| Phina 4 | I-RXD |
Amazwana:
- Inzwa inezindlela ezimbili zokuphuma: i-PWM noma i-UART, Kumodi ye-UART, i-Pin4 isetshenziswa njenge-serial port data transmitter; Kumodi ye-PWM, i-Pin4 isetshenziswa njengokuphuma kwe-PWM.
- Indlela yokukhipha yenzwa isethwe efekthri.
Isingeniso sokusebenza
Inzwa ingakwazi ukukhomba ngokunembile izinhlayiya ezinosayizi abahlukene,
- Impendulo kufulawa usebenzisa isicoci se-vacuum esifakwe i-ZPH05:
- Impendulo ivela ku- Confetti:
Ukukhishwa kwe-PWM
n Imodi ye-PWM, inzwa ikhipha isignali ye-PWM ngembobo ye-PWM (pin 3). Isikhathi se-PWM singu-500mS, futhi izinga libalwa ngokuvumelana nobubanzi bezinga eliphansi. Amazinga 1-4 ahambisana ne-100-400mS ngokulandelanayo. Ububanzi be-pulse obuphansi bokukhipha iphinikhodi buhambisana nenani lezinga lenzwa. Inani leleveli licutshungulwa ngaphakathi ngokuhlunga isofthiwe, kanye nokushaywa a ampI-litude incane uma kuqhathaniswa. Uma indlela ye-optical yenzwa ivinjwe kakhulu, ethinta ukulinganisa, inzwa izokhipha i-PWM enenkathi ye-500mS kanye nobubanzi obuphansi bezinga le-495mS kuze kube yilapho indlela ye-optical yenzwa ibuyela evamile.
Amazwana: 1.low ishayela ububanzi 100ms = 1 grade.
Okukhiphayo kwe-UART
Kumodi yembobo ye-serial, inzwa ikhipha idatha yembobo ye-serial ngephinikhodi ye-TXD (pin 3), futhi ithumele i-saframe yedatha njalo ngo-500mS.
Izilungiselelo ezijwayelekile zembobo yomkhiqizo:
| Isilinganiso se-Baud | 9600 |
| Izinga lesikhombimsebenzisi | 4.4±0.2 V(TTL) |
| Ibhayithi yedatha | 8 byte |
| Misa ibhayithi | 2 ibhayithi |
| Bheka ibhayithi | cha |
Izixwayiso
Ukufakwa:
- Isikhundla sokufakwa kwesidlulisi senzwa nomamukeli kufanele sakhelwe ku-180°±10°
- Ukuze kuqinisekiswe ukunemba nokungaguquguquki, ibanga phakathi kweshubhu yokuqalisa nomamukeli akufanele libe lide kakhulu (kunconywa ngaphansi kuka-60mm)
- Ukukhanya kwangaphandle nezinto zangaphandle kufanele kugwenywe endaweni ye-optical beam
- Indawo yenzwa kufanele igweme ukudlidliza okuqinile
- Ukuxhumana phakathi komamukeli nebhodi lomama lenzwa kufanele kugweme indawo enamandla kazibuthe kagesi. Uma kunemojula yokuxhumana okungenantambo (njenge-WiFi, i-Bluetooth, i-GPRS, njll.) eduze kwenzwa, kufanele igcine ibanga elanele ukusuka kunzwa. Sicela uqinisekise ibanga elithile lokuphepha uwedwa.
Ezokuthutha nokugcina:
- Gwema ukudlidliza - Ngesikhathi sokuthutha nokuhlanganisa, ukudlidliza okuvamile nokudlulele kuyobangelwa indawo yamadivayisi e-optoelectronic futhi kuthinte idatha yokuqala yokulinganisa.
- Isitoreji sesikhathi eside - Gcina esikhwameni esivaliwe ukuze ugweme ukuthintana namagesi abolayo ukulimaza ibhodi lesifunda imishini yokubona isihlabathi.
Ukwesekwa Kwamakhasimende
Inkampani Hengzhou Winsen Electronics Technology Co., Ltd
Engeza: No.299, Jinsuo Road, National Hi-TechZone, Zhengzhou 450001 China
Ucingo: +86-371-67169097/67169670
Ifeksi: +86-371-60932988
I-imeyili: sales@winsensor.com
Webindawo: www.winsen-sensor.com
Tel: 86-371-67169097/67169670 Fax: 86-371-60932988
I-imeyili: sales@winsensor.com
Umhlinzeki ohamba phambili wezixazululo zokuzwa igesi e-China!
I-Zhengzhou Winsen Electronics Technology Co., Ltd www.winsen-sensor.com
Amadokhumenti / Izinsiza
 |
I-Winsen ZPH05 Micro Dust Sensor [pdf] Umhlahlandlela Womsebenzisi I-ZPH05 Micro Dust Sensor, ZPH05, Inzwa Encane Yothuli, Inzwa Yothuli, Inzwa |
