Winsen ZPH05 Micro Fumbi Sensor
Ndemanga
Zokopera za bukuli ndi za Zhengzhou Winsen Electronics Technology Co., LTD. Popanda chilolezo cholembedwa, gawo lililonse la bukhuli silidzakopera, kumasuliridwa, kusungidwa mu data baseorretrieval system, silingafalikirenso kudzera pamagetsi, kukopera, kujambula. Zikomo pogula malonda athu. Kuti mulole makasitomala azigwiritsa ntchito bwino ndikuchepetsa zolakwika zomwe zimachitika chifukwa chogwiritsa ntchito molakwika, chonde werengani bukuli mosamala ndikuligwiritsa ntchito moyenera motsatira malangizo. Ngati ogwiritsa ntchito samvera mawuwo kapena kuchotsa, kusokoneza, kusintha zigawozo kumbali ya sensa, sitidzakhala ndi udindo wotayika. Zodziwika bwino monga mtundu, mawonekedwe, makulidwe & etc, chonde mumtundu zimapambana. Tikudzipereka ku chitukuko cha zinthu ndi luso lamakono, kotero tili ndi ufulu wokonza zinthu popanda kuzindikira. Chonde tsimikizirani kuti ndiyolondola musanagwiritse ntchito bukuli. Nthawi yomweyo, ndemanga za ogwiritsa ntchito pazokongoletsedwa ndi njira ndizolandirika. Chonde sungani bukuli moyenera, kuti muthandizidwe ngati muli ndi mafunso mukamagwiritsa ntchito mtsogolo.
Profile
Sensa imatengera mfundo ya kusiyanitsa kwa kuwala, yomwe imatha kuzindikira molondola komanso mwachangu kuchuluka kwa fumbi ndi zimbudzi panjira ya kuwala. Sensoryo yakhala yokalamba ndikuyimitsidwa isanatumizidwe, yomwe imakhala yabwino komanso yomveka bwino.
Mawonekedwe
- Dziwani bwino tinthu tosiyanasiyana
- Linanena bungwe chiwerengero cha particles
- Kuyankha mwachangu
- Alamu yachilendo yotsekereza njira ya Optical
- Zabwino zotsutsana ndi kusokoneza *Kukula kwakung'ono
Mapulogalamu
- Vacuum zotsukira
- Scrubber * Fumbi Mite Controller
- Loboti yosesa
- Zopangira Hood
Technical Parameters
| Chitsanzo | ZPH05 | |
| Ntchito voltage osiyanasiyana | 5±0.2 V (DC) | |
| Njira Yotulutsa | UART, PWM | |
| Chizindikiro chotulutsa voltage | 4.4 ± 0.2 V | |
| Kukhoza kuzindikira | Tinthu tating'ono kwambiri 10 μm m'mimba mwake | |
| Kuchuluka kwa mayeso | 1-4 kalasi | |
| Nthawi yofunda | ≤2s | |
| Ntchito panopa | ≤60mA | |
| Zambiri Zinyezi | Kusungirako | ≤95% RH |
| Kugwira ntchito | ≤95% RH (yopanda condensation) | |
| Kutentha Kusiyanasiyana | Kusungirako | -30 ℃ ~ 60 ℃ |
| Kugwira ntchito | 0℃～50℃ | |
| Kukula (L×W×H) | 24.52×24.22×8.3 (mm) | |
| Mawonekedwe thupi | EH2.54-4P(Poyezera zitsulo) | |
Makulidwe
Kufotokozera kwa mfundo yozindikira sensor
Pins Tanthauzo
| Pins Tanthauzo | |
| Pini 1 | + 5 V |
| Pini 2 | GND |
| Pini 3 | TXD/PWM |
| Pini 4 | Mtengo RXD |
Ndemanga:
- Sensa ili ndi njira ziwiri zotulutsa: PWM kapena UART, Mu mawonekedwe a UART, Pin4 imagwiritsidwa ntchito ngati transmitter doko la data; Mu mawonekedwe a PWM, Pin4 imagwiritsidwa ntchito ngati kutulutsa kwa PWM.
- Njira yotulutsa sensa imayikidwa pafakitale.
Chiyambi cha machitidwe
Sensa imatha kuzindikira bwino tinthu tating'onoting'ono tosiyanasiyana,
- Kuyankha ufa pogwiritsa ntchito vacuum chotsukira chopangidwa ndi ZPH05:
- Mayankho a Confetti:
Kutulutsa kwa PWM
n PWM mode, sensor imatulutsa chizindikiro cha PWM kudzera pa doko la PWM (pini 3). Nthawi ya PWM ndi 500mS, ndipo mulingo umawerengedwa molingana ndi m'lifupi mwake. Miyezo 1-4 imagwirizana ndi 100-400mS motsatana. Kutsika kwapang'onopang'ono kwa pini kumatulutsa kumafanana ndi mtengo wa sensa. Mtengo wa mulingo umakonzedwa mkati ndi kusefa kwa mapulogalamu, ndikumenya a ampmaphunziro ndi ochepa. Ngati njira ya kuwala kwa sensa yatsekedwa kwambiri, yomwe imakhudza muyeso, sensor idzatulutsa PWM yokhala ndi nthawi ya 500mS ndi m'lifupi mwake 495mS mpaka njira ya kuwala kwa sensa ibwereranso.
Ndemanga: 1.low kugunda m'lifupi 100ms = 1 kalasi.
Zotsatira za UART
Mu mawonekedwe a doko la serial, sensa imatulutsa data ya serial port kudzera pa pini ya TXD (pin 3), ndikutumiza saframe ya data 500mS iliyonse.
Zokonda pa serial port general:
| Mtengo wamtengo | 9600 |
| Mulingo wolumikizirana | 4.4±0.2 V(TTL) |
| Data byte | 8 pa |
| Imani basi | 2 bati |
| Onani bati | ayi |
Chenjezo
Kuyika:
- Kuyika kwa sensa transmitter ndi wolandila kuyenera kupangidwa pa 180 ° ± 10 °
- Kuti muwonetsetse kulondola komanso kusasinthika, mtunda pakati pa chubu choyambitsa ndi wolandila usakhale wautali kwambiri (omwe akulimbikitsidwa osakwana 60mm)
- Kuwala kwakunja ndi zinthu zakunja ziyenera kupewedwa m'dera la mtengo wa kuwala
- Malo a sensa ayenera kupewa kugwedezeka kwamphamvu
- Kulumikizana pakati pa wolandila ndi boardboard ya sensor kuyenera kupewa malo amphamvu amagetsi. Pakakhala gawo lolumikizirana opanda zingwe (monga WiFi, Bluetooth, GPRS, ndi zina) kuzungulira sensor, iyenera kukhala mtunda wokwanira kuchokera ku sensa. Chonde tsimikizirani mtunda wotetezedwa nokha.
Transport & yosungirako:
- Pewani kugwedezeka - Panthawi ya mayendedwe ndi kusonkhana, kugwedezeka pafupipafupi komanso kopitilira muyeso kumayambitsa komwe kuli zida za optoelectronic ndikumakhudza zomwe zidayambira kale.
- Kusungirako nthawi yayitali - Sungani m'chikwama chosindikizidwa kuti musakhudzidwe ndi mpweya wowononga kuti uwononge zida zowonera mchenga
Thandizo la Makasitomala
Malingaliro a kampani Hengzhou Winsen Electronics Technology Co., Ltd
Onjezani: No.299, Jinsuo Road, National Hi-TechZone, Zhengzhou 450001 China
Tel: +86-371-67169097/67169670
Fax: + 86-371-60932988
Imelo: sales@winsensor.com
Webtsamba: www.winsen-sensor.com
Tel: 86-371-67169097/67169670 Fax: 86-371-60932988
Imelo: sales@winsensor.com
Kutsogolera othandizira kuthana ndi gasi ku China!
Malingaliro a kampani Zhengzhou Winsen Electronics Technology Co., Ltd www.winsen-sensor.com
Zolemba / Zothandizira
 |
Winsen ZPH05 Micro Fumbi Sensor [pdf] Buku Logwiritsa Ntchito ZPH05 Micro Fumbi Sensor, ZPH05, Micro Fumbi Sensor, Fumbi Sensor, Sensor |
