Winsen ZPH05 Micro Dust Sensor
Polelo
Tokelo ena ea litokelo tsa molao ke ea Zhengzhou Winsen Electronics Technology Co., LTD. Ntle le tumello e ngotsoeng, karolo efe kapa efe ea bukana ena e ke ke ea kopitsoa, ea fetoleloa, ea bolokoa ho sistimi ea data baseorretrieval, hape e ke ke ea hasana ka mokhoa oa elektroniki, oa ho kopitsa, le oa ho rekota. Re leboha ho reka sehlahisoa sa rona. E le ho lumella bareki ho e sebelisa hamolemo le ho fokotsa liphoso tse bakoang ke tšebeliso e mpe, ka kopo bala bukana ka hloko 'me u e sebetse ka nepo ho latela litaelo. Haeba basebelisi ba sa mamele lipehelo kapa ba tlosa, ba qhaqha, ba fetola likarolo tse ka lehlakoreng la sensor, re ke ke ra ikarabella bakeng sa tahlehelo. Tse khethehileng joalo ka 'mala, chebahalo, boholo le tse ling, ka kopo ka mofuta oa tsona lia hlola. Re inehetse ho nts'etsopele ea lihlahisoa le boqapi ba tekheniki, kahoo re na le tokelo ea ho ntlafatsa lihlahisoa ntle le tsebiso. Ka kopo netefatsa hore ke mofuta o nepahetseng pele o sebelisa bukana ena. Ka nako e ts'oanang, maikutlo a basebelisi mabapi le mokhoa o ntlafalitsoeng oa ho sebelisa a amohelehile. Ka kopo boloka bukana ea litaelo hantle, e le hore u ka fumana thuso haeba u e-na le lipotso nakong ea tšebeliso nakong e tlang.
Profile
Sensor e nka molao-motheo oa phapang ea optical, e ka khonang ho lemoha ka nepo le ka potlako boemo ba lerōle le likhoerekhoere tseleng ea optical. Sensor e se e tsofetse ebile e lekantsoe pele e romelloa, e nang le botsitso bo botle le kutlo.
Likaroloana
- Hlalosa ka nepo likaroloana tse fapaneng
- Hlahisa palo ea likaroloana
- Karabelo e potlakileng
- Alamo e sa tloaelehang e thibelang tsela ea mahlo
- Khahlanong le tšitiso e ntle *Boholo bo bonyenyane
Lisebelisoa
- Vacuum cleaner
- Scrubber *Lerōle Mite Controller
- Roboto ea ho fiela
- Range Hood
Tekheniki Parameters
| Mohlala | ZPH05 | |
| Sebetsa voltage fapaneng | 5±0.2 V (DC) | |
| Mokhoa oa Phello | UART, PWM | |
| Letšoao la tlhahiso voltage | Lihlahisoa: 4.4 ± 0.2 V | |
| Bokhoni ba ho lemoha | Likaroloana tse nyane ka ho fetisisa 10 μm bophara | |
| Sebaka sa teko | 1-4 limaraka | |
| Nako ea ho futhumatsa | ≤2s | |
| Ho sebetsa hona joale | ≤60mA | |
| Mofuta oa Humidity | Polokelo | ≤95%RH |
| Ho sebetsa | ≤95%RH (e sa tsitsang) | |
| Mocheso Range | Polokelo | -30℃～60℃ |
| Ho sebetsa | 0℃～50℃ | |
| Boholo (L×W×H) | 24.52×24.22×8.3 (mm) | |
| Sebopeho sa 'mele | EH2.54-4P(Teminale sokete) | |
Litekanyo
Tlhaloso ea molao-motheo oa ho lemoha
Pins Tlhaloso
| Pins Tlhaloso | |
| Pina ea 1 | +5V |
| Pina ea 2 | GND |
| Pina ea 3 | TXD/PWM |
| Pina ea 4 | RXD |
Maikutlo:
- Sensor e na le mekhoa e 'meli ea tlhahiso: PWM kapa UART, Ka mokhoa oa UART, Pin4 e sebelisoa e le mochine oa data oa serial port; Ka mokhoa oa PWM, Pin4 e sebelisoa e le tlhahiso ea PWM.
- Mokhoa oa tlhahiso ea sensor o behiloe fekthering.
Selelekela sa tshebetso
Sensor e khona ho tseba ka nepo likaroloana tsa boholo bo fapaneng,
- Karabo ho phofo o sebelisa vacuum cleaner e kentsoeng ZPH05:
- Karabo ea Confetti:
Tlhahiso ea PWM
n PWM mode, sensor e hlahisa lets'oao la PWM ka boema-kepe ba PWM (pin 3). Nako ea PWM ke 500mS, 'me boemo bo baloa ho latela bophara ba boemo bo tlaase. Maemo a 1-4 a lumellana le 100-400mS ka ho latellana. Bophara bo tlase ba phallo ea pini bo lumellana le boleng ba boemo ba sensor. Boleng ba boemo bo sebetsoa ka hare ke software filtering, le ho otla a ampboholo bo batla bo fokola. Haeba tsela ea optical ea sensor e koetsoe ka botebo, e amang tekanyo, mochine o tla hlahisa PWM e nang le nako ea 500mS le bophara bo tlaase ba 495mS ho fihlela tsela ea optical ea sensor e khutlela ho tloaelehileng.
Maikutlo: 1. low pulse wide 100ms = 1 grade.
Tlhahiso ea UART
Ka mokhoa oa serial port, sensor e ntša data ea serial port ka TXD pin (pin 3), ebe e romela saframe ea data ka 500mS e ngoe le e ngoe.
Litlhophiso tse akaretsang tsa port port:
| Sekhahla sa Baud | 9600 |
| Boemo ba sebopeho | 4.4±0.2 V(TTL) |
| Data byte | 8 li-byte |
| Emisa byte | 2 baiti |
| Sheba ka byte | che |
Litemoso
Kemiso:
- Boemo ba ho kenya mochine oa motlakase le moamoheli o lokela ho etsoa ho 180 ° ± 10 °
- E le ho netefatsa ho nepahala le ho tsitsisa, sebaka se pakeng tsa tube ea ho qala le moamoheli ha ea lokela ho ba telele haholo (e khothaletsoa ka tlase ho 60mm)
- Leseli la ka ntle le lintho tse tsoang linaheng tse ling li lokela ho qojoa sebakeng sa mahlaseli a optical
- Sebaka sa sensor se lokela ho qoba ho thothomela ho matla
- Khokahano lipakeng tsa moamoheli le "motherboard" ea sensor e lokela ho qoba tikoloho e matla ea motlakase. Ha ho na le mojule oa puisano oa waelese (joalo ka WiFi, Bluetooth, GPRS, joalo-joalo) ho potoloha sensor, e lokela ho boloka sebaka se lekaneng ho tloha ho sensor. Ka kopo, netefatsa sebaka se itseng sa polokeho u le mong.
Sepalangoang le polokelo:
- Qoba ho thothomela - Nakong ea lipalangoang le kopano, ho thothomela khafetsa le ho feteletseng ho tla bakoa ke sebaka sa lisebelisoa tsa optoelectronic mme se ama data ea mantlha ea ho lekanya.
- Ho boloka nako e telele - Boloka ka mokotleng o koetsoeng ho qoba ho kopana le likhase tse senyang ho senya lisebelisoa tsa lehlabathe la potoloho.
Tšehetso ea Bareki
Hengzhou Winsen Electronics Technology Co., Ltd
Kenya: No.299, Jinsuo Road, National Hi-TechZone, Zhengzhou 450001 China
Mohala: +86-371-67169097/67169670
Fax: +86-371-60932988
E-mail: sales@winsensor.com
Websebaka: www.winsen-sensor.com
Tel: 86-371-67169097/67169670 Fax: 86-371-60932988
Lengolo-tsoibila: sales@winsensor.com
Mofani oa thepa ea pele ea tharollo ea khase Chaena!
Zhengzhou Winsen Electronics Technology Co., Ltd www.winsen-sensor.com
Litokomane / Lisebelisoa
 |
Winsen ZPH05 Micro Dust Sensor [pdf] Bukana ea Mosebelisi ZPH05 Micro Dust Sensor, ZPH05, Micro Dust Sensor, Sensor ea Lerōle, Sensor |
