Idatha ye-V2403C
Umhlahlandlela Wokufaka Ngokushesha
Amakhompyutha Ashumekiwe
Inguqulo 1.1, February 2022
Ulwazi Lokuxhumana Lokusekela Lobuchwepheshe
www.moxa.com/support
Kuphelileview
Amakhompuyutha ashumekiwe we-V2403C Series asekelwe kuphrosesa yesizukulwane se-Intel® 7 futhi anezimbobo ze-serial ezingu-4 RS-232/422/485, izimbobo ze-LAN ezingu-4, nezimbobo ezingu-4 ze-USB 3.0. Amakhompyutha e-V2403C afika nembobo ye-DisplayPort engu-1 kanye nembobo ye-HDMI engu-1 enokwesekwa kwe-4-k, efeza izidingo ezihlukahlukene zezinhlelo zokusebenza zezimboni.
Imbobo ye-mSATA, izixhumi ze-SATA, nezimbobo ze-USB zinikeza amakhompyutha e-V2403C ukwethembeka okudingekayo ezinhlelweni zezimboni ezidinga ukunwetshwa kwesitoreji sokugcina idatha.
Uhlu Lokuhlola Iphakheji
Iphakheji ngayinye yemodeli yesistimu eyisisekelo ithunyelwa nezinto ezilandelayo:
- Ikhompyutha eshumekiwe ye-V2403C Series
- Ikhithi yokufaka udonga
- Iphakheji yethreyi yediski yesitoreji
- Ilokha yekhebula le-HDMI
- Umhlahlandlela wokufaka okusheshayo (uphrintiwe)
- Ikhadi lewaranti
Ukufakwa kwe-Hardware
Ngaphambili View
Ubukhulu
Izinkomba ze-LED
Ithebula elilandelayo lichaza izinkomba ze-LED ezitholakala kumaphaneli angaphambili nangemuva ekhompyutha ye-V2403C.
| Igama le-LED | Isimo | Umsebenzi |
| Amandla
(Ngamandla inkinobho) |
Okuhlaza | Amandla avuliwe |
| Valiwe | Akukho okokufaka kwamandla noma elinye iphutha lamandla | |
| I-Ethernet
(100 Mbps) (1000 Mbps) |
Okuhlaza | Ivuliwe Ngokuqinile: Isixhumanisi se-Ethernet esingu-100 Mbps Ukucwayiza: Ukudluliswa kwedatha kuyaqhubeka |
| Okuphuzi | I-Stady On 1000 Mbps Ethernet isixhumanisi Ukucwayiza: Ukudluliswa kwedatha kuyaqhubeka | |
| Valiwe | Isivinini sokudluliswa kwedatha ku-10 Mbps noma ikhebuli ayixhunyiwe | |
| I-Serial (TX/RX) | Okuhlaza | Tx: Ukudluliswa kwedatha kuyaqhubeka |
| Okuphuzi | Rx: Ukuthola Idatha | |
| Valiwe | Akukho ukusebenza | |
| Isitoreji | Okuphuzi | Idatha ifinyelelwa kumadrayivu e-mSATA noma e-SATA |
| Valiwe | Idatha ayifinyelelwa kumadrayivu esitoreji |
Ukufaka i-V2403C
Ikhompyutha ye-V2403C iza nabakaki ababili abafaka udonga. Namathisela amabakaki kukhompuyutha usebenzisa izikulufu ezine ohlangothini ngalunye. Qinisekisa ukuthi amabakaki okukhweza anamathiselwe kukhompuyutha ye-V2403C ngendlela eboniswe esithombeni esilandelayo.
Izikulufu eziyisishiyagalombili zabakaki abafakwayo zifakiwe kuphakheji yomkhiqizo. Ziyizikulufu ezijwayelekile ze-IMS_M3x5L futhi zidinga itorque engu-4.5 kg-cm. Bheka umfanekiso olandelayo ukuze uthole imininingwane.
Sebenzisa izikulufu ezimbili (kunconywa i-M3*5L ejwayelekile) ohlangothini ngalunye ukuze unamathisele i-V2403C odongeni noma ekhabetheni. Iphakheji yomkhiqizo ayifaki izikulufo ezine ezidingekayo ukuze kunamathiselwe ikhithi yokufaka odongeni; zidinga ukuthengwa ngokwehlukana. Qinisekisa ukuthi ikhompuyutha ye-V2403C ifakiwe ngendlela eboniswe esithombeni esilandelayo.
Ukuxhuma Amandla
Amakhompyutha e-V2403C ahlinzekwa ngezixhumi zokufaka amandla ezinamaphini angu-3 kubhulokhi yetheminali kuphaneli engaphambili. Xhuma izintambo zamandla kuzixhumi bese uqinisa izixhumi. Cindezela inkinobho yamandla.
I Amandla I-LED (enkinobho yamandla) izokhanya ukuze ibonise ukuthi amandla anikezwa ikhompuyutha. Kufanele kuthathe cishe amasekhondi angu-30 kuya kwangu-60 ukuze isistimu yokusebenza iqedele inqubo yokuqalisa.
| Phina 1 | Incazelo |
| 1 | V+ |
| 2 | V- |
| 3 | Ukuthungela |
Incazelo yokufaka amandla inikezwe ngezansi:
• Isilinganiso somthombo wamandla we-DC singu-12 V @ 5.83 A, 48 V @ 1.46 A, kanye nobuncane obungu-18 AWG.
Ukuze uthole ukuvikelwa kokuhlinza, xhuma isixhumi esiphansi esingaphansi kwesixhumi samandla nomhlaba (umhlabathi) noma indawo yensimbi.
Ngaphezu kwalokho, kukhona inkinobho yokulawula ukuthungela kuphaneli yangaphambili, engasetshenziswa ukulawula okokufaka kwamandla. Bheka ku-V2403C Hardware User Manual ukuze uthole imininingwane.
Ixhuma Izibonisi
I-V2403C inesixhumi sembobo sokubonisa esingu-1 kuphaneli engemuva. Ngaphezu kwalokho, enye i-interface ye-HDMI nayo inikezwa kuphaneli engemuva.
QAPHELA Ukuze ube nokusakaza kwevidiyo okuthembeke kakhulu, sebenzisa amakhebuli aqinisekisiwe we-HDMI.
Izimbobo ze-USB
I-V2403C iza nezimbobo ezi-4 ze-USB 3.0 kuphaneli yangaphambili. Izimbobo ze-USB zingasetshenziselwa ukuxhuma kwamanye ama-peripheral, njengekhibhodi, igundane, noma amadrayivu e-flash ukuze kunwetshwe umthamo wesitoreji wesistimu.
Amachweba we-Serial
I-V2403C iza namachweba we-serial angama-4 we-RS-232/422/485 kuphaneli yangemuva. Amachweba asebenzisa izixhumi zabesilisa ze-DB9. Bheka ithebula elilandelayo ukuze uthole imisebenzi yokuphina:
| Phina | RS-232 | RS-422 | RS-485 (4-izintambo) |
RS-485 (2-izintambo) |
| 1 | I-DCD | I-TDA(-) | I-TDA(-) | |
| 2 | I-RxD | I-TxDB(+) | I-TxDB(+) | |
| 3 | I-TxD | I-RxDB(+) | I-RxDB(+) | IdathaB(+) |
| 4 | I-DTR | I-RxDA(-) | I-RxDA(-) | IdathaA(-) |
| 5 | GND | GND | GND | GND |
| 6 | I-DSR | |||
| 7 | I-RTS | |||
| 8 | I-CTS |
Izimbobo ze-Ethernet
I-V2403C inamachweba angu-4 100/1000 Mbps RJ45 Ethernet anezixhumi ze-RJ45 kuphaneli yangaphambili. Bheka ithebula elilandelayo ukuze uthole imisebenzi yephinikhodi:
| Phina | 10/100 Mbps | 1000 Mbps |
| 1 | ETx+ | I-TRD(0)+ |
| 2 | ETx- | I-TRD(0)- |
| 3 | ERx+ | I-TRD(1)+ |
| 4 | – | I-TRD(2)+ |
| 5 | – | I-TRD(2)- |
| 6 | ERx- | I-TRD(1)- |
| 7 | – | I-TRD(3)+ |
| 8 | – | I-TRD(3)- |
QAPHELA Ngoxhumo oluthembekile lwe-Ethernet, sincoma ukuthi unike amandla izimbobo kumazinga okushisa ajwayelekile futhi uzigcine zivuliwe ezindaweni ezinethempelesha eliphezulu/eliphansi.
Okokufaka Kwedijithali/Okukhiphayo Kwedijithali
I-V2403C iza nezinto ezi-4 zedijithali kanye nezingu-4 zedijithali kubhulokhi yetheminali. Bheka izibalo ezilandelayo ukuze uthole izincazelo zephinikhodi nezilinganiso zamanje.
| Okokufaka Kwedijithali Oxhumana naye omile Umqondo 0: Okufushane kokuthi Ground Umqondo 1: Vula Ukuthintana Okumanzi (DI ukuya ku-COM) I-Logic 1: 10 kuya ku-30 VDC I-Logic 0: 0 kuya ku-3 VDC |
Imiphumela Yedijithali Isilinganiso samanje: 200 mA nge isiteshi Voltage: 24 kuya ku-30 VDC |
Ukuze uthole izindlela ezinemininingwane zokufaka izintambo, bheka ku-V2403C Hardware User's Manual.
Ifaka Amadiski Esitoreji
I-V2403C iza namasokhethi amabili okugcina angu-2.5-intshi, okuvumela abasebenzisi ukuthi bafake amadiski amabili okugcina idatha.
Landela lezi zinyathelo ukufaka i-hard disk drive.
- Khipha ithreyi yediski yokugcina
- Beka idrayivu yediski kuthreyi. kusuka kuphakheji yomkhiqizo.
- Vula i-disk kanye nokuhlelwa kwethreyi nxazonke view ohlangothini olungemuva lwethreyi. Bopha izikulufu ezine ukuze uvikele idiski ethreyini.
- Susa zonke izikulufu kuphaneli engemuva yekhompyutha ye-V2403C.
- Khipha isembozo sangemuva sekhompiyutha futhi uthole indawo yesokhethi yediski yokugcina. Kunamasokhethi amabili ethreyi yediski yokugcina; ungawafaka kunoma yiliphi isokhethi.
- Ukuze ubeke ithreyi yediski yokugcina, beka isiphetho sethreyi eduze kwe-groove kusokhethi.
- Beka ithreyi kusokhethi bese uphushela phezulu ukuze izixhumi kuthreyi yediski yokugcina kanye nesokhethi kuxhumeke. Bopha izikulufu ezimbili phansi kwethreyi.
Ukuze uthole imiyalelo yokufaka amanye amadivaysi e-peripheral noma amamojula angenawaya, bheka Imanuwali Yomsebenzisi Wezingxenyekazi Zekhompyutha ye-V2403C.
QAPHELA Le khompyutha kuhloswe ngayo ukufakwa endaweni okunomkhawulo wokungena kuyo kuphela. Ukwengeza, ngenxa yezizathu zokuphepha, ikhompuyutha kufanele ifakwe futhi isingathwe kuphela ochwepheshe abaqeqeshiwe nabanolwazi.
QAPHELA Le khompyutha yakhelwe ukuthi ihlinzekwe ngezinto ezisetshenziswayo ezisohlwini ezilinganiselwe ku-12 kuya ku-48 VDC, ubuncane obungu-5.83 ukuya ku-1.46 A, kanye nobuncane be-Tma=70˚C. Uma udinga usizo lokuthenga i-adaptha yamandla, xhumana nethimba labasekeli bezobuchwepheshe be-Moxa.
QAPHELA Uma usebenzisa i-adaptha Yekilasi I, i-adaptha yentambo yamandla kufanele ixhunywe kusokhethi enoxhumo olunomhlaba noma intambo yamandla kanye ne-adaptha kufanele ihambisane nokwakhiwa kweClass II.
Ukushintsha Ibhethri
I-V2403C iza nembobo eyodwa yebhethri, efakwe nebhethri ye-lithium enemininingwane engu-3 V/195 mAh. Ukushintsha ibhethri, landela lezi zinyathelo ezingezansi:
- Ikhava yebhethri itholakala kuphaneli elingemuva lekhompyutha.
- Khumula izikulufu ezimbili kukhava yebhethri.
- Susa ikhava; ibhethri linamathiselwe kwikhava.
- Hlukanisa isixhumi bese ukhipha izikulufu ezimbili epuleti lensimbi.
- Miselela ibhethri elisha kusibambi sebhethri, beka insimbi kubhethri, bese ubophela izikulufu ezimbili ziqine.
- Xhuma kabusha isixhumi, beka isibambi sebhethri endaweni, futhi uvikele ikhava yesikhala ngokuhlanganisa izikulufu ezimbili kukhava.
QAPHELA • Qiniseka ukuthi usebenzisa uhlobo olulungile lwebhethri. Ibhethri elingalungile lingase lidale umonakalo wesistimu. Xhumana nabasebenzi bosekelo lwezobuchwepheshe bakwa-Moxa ukuze uthole usizo, uma kunesidingo.
• Ukuze unciphise ingozi yomlilo noma yokusha, ungaliqaqi, uliphihlize, noma ulibhoboze ibhethri; ungayilahli emlilweni noma emanzini, futhi ungafinyeleli othintana nabo bangaphandle.
QAPHELA
Ngaphambi kokuxhuma i-V2403C kokokufaka kwamandla e-DC, qiniseka ukuthi umthombo wamandla we-DC voltage uzinzile.
Izintambo zesivimbelo setheminali yokufaka zizofakwa ngumuntu onekhono.
• Uhlobo lwentambo: Cu
• Sebenzisa kuphela usayizi wentambo engu-28-18 AWG kanye nenani letorque elingu-0.5 Nm.
• Sebenzisa ukhondatha oyedwa kuphela eklampiphoyinti eliphakathi komthombo wamandla we-DC nokokufaka kwamandla.
Amadokhumenti / Izinsiza
 |
I-MOXA V2403C Series I-Fanless x86 Embedded Computers ye-IIoT [pdf] Umhlahlandlela wokufaka I-V2403C Series, I-Fanless x86 Embedded Computers ye-IIoT |
