I-DALC NET LINE-5CV-DMX Voltage I-Output For Strip LED kanye ne-LED Module User Manual

Ukucushwa nge-Dalcnet LightApp:
I-LINE-5CV-DMX ingalungiswa kusetshenziswa uhlelo lweselula lwe-Dalcnet LightApp. Lungisa amapharamitha afana nemvamisa yokufiphala, ijika lokufiphala, amazinga aphezulu kanye nobuncane bokukhanya, njll. I-LightApp iyatholakala ukuze ilandwe ku-Apple App Store kanye ne-Google Play Store.

Ukufakwa:
Bheka umdwebo wezintambo onikezwe kumanuwali ukuze ufakwe kahle. Qinisekisa ukuxhumana okulungile kokusetha okufunayo.

Ukusetha Amapharamitha:
Sebenzisa i-LightApp noma i-RDM ukuze usethe amapharamitha afana ne-PWM Frequency, Adjustment Curve, Power On Levels, kanye Nobuntu be-DMX.

Imiyalo yokusebenza:

Ukusebenza Kokuvula/Ukuvala Okuthambile: Inika amandla ukuguqulwa kwamandla kancane kancane ukuze kusebenze kahle.
Ukufiphalisa Ukukhanya Okuthambile: Ivumela ukulungiswa kokukhanya okuthambile.

Ukuvikelwa Kwesekethe Emfishane: Kuvikela imiphumela ye-LED emonakalweni uma kwenzeka kuba nesekethe emfushane.
Okokufaka kwe-DMX Ye-Opto-Isolated: Iqinisekisa ukwamukelwa kwesignali ye-DMX ephephile nethembekile.

Ibanga Lezinga Lokushisa Elinwetshiwe: Isebenza phakathi kwebanga lokushisa elibanzi ukuze isetshenziswe ngezindlela ezihlukahlukene.
Ukuhlolwa Okusebenzayo: Yenza ukuhlolwa kokusebenza okungu-100% ngaphambi kokusebenza okugcwele ukuze uqinisekise ukusebenza okufanele.

I-FAQ:

Q: Ngingayithola kuphi imanuwali esesikhathini samanje?
A: Ukuze uthole inguqulo yakamuva eyenziwa ngesandla, vakashela www.dalcnet.com noma skena ikhodi ye-QR kudivayisi yakho.

IZICI

I-DIMMER LED
Ukunikezwa kwamandla: 12-24-48 Vdc
Voltage Okukhiphayo kwe-strip LED ne-LED module
WHITE, MONOCOLOR, DYNAMIC WHITE, RGB, RGB+W, RGB+WW kanye ne-RGB+TW Light Control
Umyalo WEBHASI:: DMX512-A+RDM
Ukucushwa kwedivayisi kusetshenziswa uhlelo lokusebenza lweselula lwe-Dalcnet LightApp
Uscite in tension costante per carichi R
Ukushintshwa kwe-PWM kusuka ku-300 kuye ku-4000 Hz
Amapharamitha angasethwa ku-APP nange-RDM:
- Imvamisa ye-PWM
- Ijika lokulungisa
- Amandla On Levels
- Ubuntu DMX

Inkomba yamahora okusebenza nemijikelezo yokuthungela
Ukuvikelwa kwesiyingi esifushane kokuphumayo kwe-LED
Okokufaka kwe-DMX Ye-Opto-Isolated

I-Soft on/off
Ukukhanya okuthambile kuyafiphala
Ibanga lokushisa elinwetshiwe

100% Ukuhlolwa okusebenzayo

INCAZELO YOMKHIQIZO

I-LINE-5CV-DMX iyishaneli engu-5 ephumayo ye-LED dimmer, engalawulwa kusetshenziswa isilawuli se-DMX BUS.
I-LED dimmer ifanele ukushayela imithwalo efana nama-StripLED namamojula e-LED, Amhlophe, Ombala Owodwa, Dynamic White, RGB, RGB+W, RGB+WW kanye ne-RGB+TW ngevolthi engaguquki.tage. Amandla kagesi ayi-12-24-48 Vdc angaxhunywa.

Okukhiphayo okuphezulu kwamanje ngu-12A. I-dimmer LED inokuvikela okulandelayo: ukuvikelwa kwesekethe emfushane kokuphumayo kwe-LED, ukuvikelwa kwamandla angaphezu kwamandla, ukuvikela ukuhlehla kwe-polarity, nokuvikelwa kwe-fuse okokufaka.
Ngohlelo lokusebenza lweselula lwe-Dalcnet LightApp, kungenzeka ukuthi ulungiselele amapharamitha amaningi we-LINE-5CV-DMX njengefrikhwensi yokufiphala, ijika lokufiphala, izinga lokukhanya okukhulu kanye namaminithi, njll.
I-LightApp ingalandwa mahhala ku-Apple App Store naku-Google Play Isitolo.

⇢ Ukuze uthole imanuwali yakamuva kakhulu, sicela uvakashele yethu webindawo: www.dalcnet.com noma Ikhodi ye-QR ngqo kudivayisi yakho.

IKHODI YOMKHIQIZO

IKHODI	UKUNIKEZWA KWAMANDLA KAGESI	I-LED EPHUMAYO	N° YEsiteshi	UMYALELO WEBHASI	UKULUNGISWA KWE-APP
I-LINE-5CV-DMX	12-24-48 VDC	5 x 5A (ubukhulu obungu-12A)1	5	I-DMX512-RDM	UHLELO LOKUSEBENZA: UHLELO LOKUKHANYA

IZIVIKELO

I-OVP	Ngaphezulu kwe-voltagisivikelo2	✔
I-RVP	Ukuvikelwa kokuhlehla kwe-polarity2	✔
I-IFP	Ukuvikelwa nge-fise yokufaka2	✔
I-SCP	Ukuvikelwa kwesifunda esifushane	✔

REFERENCE AMAZINGA

I-EN 55015	Imikhawulo nezindlela zokulinganisa izici zokuphazamiseka komsakazo wokukhanyisa ugesi nezinye izinto ezifanayo
I-EN 61547	Izisetshenziswa zezinjongo zokukhanyisa ezijwayelekile - Imfuneko yokugomela ye-EMC
EN 61347-1	Lamp I-Controlgear - Ingxenye 1: Imfuneko evamile kanye nokuphepha
EN 61347-2-13	Lamp I-Controlgear - Ingxenye 2-13: Izidingo ezikhethekile ze-dc noma i-ac ehlinzekwe nge-electronic Controlgear kumamojula we-LED
I-ANSI E1.11	Ubuchwepheshe Bezokuzijabulisa – USITT DMX512-A – I-Asynchronous Serial Digital Data Transmission Standard for Controlling Lighting Aquipment and Accessories
I-ANSI E1.20	Ezokuzijabulisa Technology-RDM-Remote Ukuphathwa Kwedivayisi phezu USITT DMX512 Amanethiwekhi

IMICIMBI YOBUCHWEPHESHE

			I-LINE 5CV DMX
DC voltagibanga			Ubuncane: 10,8Vdc – Max: 52,8Vdc
Umphumela voltage			=Vin
Faka okwamanje			Ubukhulu 12A
Okukhiphayo okwamanje3			5x 5A	max 12A Totali
Amandla okuzisholo		12vdc	60W	144W Ingqikithi.
		24vdc	120W	288W Amandla
		48vdc	240W	576W Ingqikithi.
Ukuphelelwa amandla kumodi yokulinda			<0,5W
Uhlobo lwemithwalo4			R
Amajika afiphele5			Linear – Quadratic – Exponential
Indlela yokufiphaza			I-Pulse Width Modulation “PWM”
Imvamisa ye-PWM5			307 - 667 - 1333 - 2000 - 4000 Hz
Ukulungiswa kwe-PWM			16 bit
Izinga Lokushisa Lesitoreji			Ubuncane: -40°C – Ubukhulu: 60°C
Izinga lokushisa elisebenzayo le-ambient, Ta3			Ubuncane: -10°C – Ubukhulu: 60°C
Uhlobo lwesixhumi			I-Morsetti Push-In
Isigaba sezintambo	Usayizi Oqinile		0,2 ÷ 1,5 mm2 / 24 ÷ 16 AWG
	Usayizi Oboshiwe
Wire strip ubude			9 u10 mm
Ibanga lokuvikela i-IP			IP20
I-Casing Material			Ipulasitiki
Amayunithi okupakisha (izingcezu/amayunithi)			1 pz
Ubukhulu bemishini			186 x 29 x 21 mm
Ubukhulu bokupakisha			197 x 34 x 29 mm
Isisindo			80g

IDIAGRAM WIRING

Landela lezi zinyathelo ezingezansi zokufakwa komkhiqizo njengoba kukhonjisiwe kumdwebo wokuxhuma:

Layisha uxhumano: xhuma umthwalo we-LED ophozithivu kutheminali ethi “L” enophawu “+”, esikhundleni sama-negatives womthwalo we-LED kumatheminali “L1”, “L2”, “L3”, “L4” kanye no-“L5” anophawu “-”.

Ukuxhumeka kwe-DMX-RDM BUS: xhuma isignali ye-DATA+, DATA- ne-COM ngokulandelanayo kumatheminali e-“DMX” ngezimpawu ze-“D+” “D-” “COM”. Qiniseka ukuthi awuzixhumi izingxenye ezibukhoma kumatheminali "INPUT".
Ukuxhumeka kokuhlinzeka: xhuma ivolumu engu-12-24-48 Vdc engaguqukitage Ukunikezwa kwamandla ka-SELV (kuye ngokuthi izici zobuchwepheshe zomthwalo we-LED) kutheminali ye-DC IN enezimpawu ezithi “+” kanye “-”.
Qinisekisa ukuthi awusebenzisi ugesi ophumayo ongashintshi futhi uhlole ukuthi i-polarity yezintambo ilungile yini.

IDIAGRAM YOKUXHUMANA: I-PERSONALITY DIMMER NE-MACRO DIMMER IFIKE KUYIMILAYO EMHLOPHE KA-5 NOMA I-MONOCHROME

IDIAGRAM YOKUXHUMANA:
UBUNTU BUFINYELELE BUYE BUFUDUMELE FUTHI BUHLUNGU BUMHLOPHE UKUZE KUYA KU-2 IMILAYO EFINYELELA UKUZE KUFUDUMELE NOMA OKUSHIYE EMHLOPHE

UKUSEBENZA KWE-FLICKER

Ngenxa yokufiphala kwayo okungu-4kHz, i-LINE-5CV-DMX inciphisa ngempumelelo ukwenzeka kwe-Flicker phenomenon. Kuye ngokuzwela komuntu ngamunye kanye nemvelo yemisebenzi yakhe, ukucwayiza kungaba nomthelela enhlalakahleni yomuntu, ngisho noma izinguquko ekukhanyeni zingaphezu komkhawulo ongabonwa ngeso lomuntu.
Igrafu ibonisa isenzeko Sokucwayiza emsebenzini kumafrikhwensi, kukalwa kulo lonke ibanga lokufiphala.
Imiphumela ibonisa indawo enengozi ephansi (ephuzi) kanye nendawo engenamphumela (eluhlaza). Kuchazwe yi-IEEE 1789-20156

I-DIMMING curve

I-DMX+RDM BUS OPERATION

NGEMODI YEBHUSI LE-DMX+RDM “SLAVE”, OKUPHUMA KULAWULWA NGOKULAWULWA KWE-DMX NGAPHANDLE.

AMAZINGA ENQINISO YEBHASI LE-DMX512+RDM

I-ANSI E1.11	Ubuchwepheshe Bezokuzijabulisa – USITT DMX512-A – I-Asynchronous Serial Digital Data Transmission Standard for Controlling Lighting Aquipment and Accessories
I-ANSI E1.20	Ezokuzijabulisa Technology-RDM-Remote Ukuphathwa Kwedivayisi phezu USITT DMX512 Amanethiwekhi

I-PIN OUT 3 KANYE NE-5 PIN XLR Connectors

SEBENZISA	3-PIN XLR Iphinikhodi #	5-PIN XLR Iphinikhodi #	Umsebenzi we-DMX512
Ireferensi evamile	1	1	Isixhumanisi Sedatha Esijwayelekile
Isixhumanisi Sedatha Eyisisekelo	2	2	Idatha 1-
Isixhumanisi Sedatha Eyisisekelo	3	3	Idatha 1+
Isixhumanisi Sedatha Yesibili (Ongakukhetha - bheka isigatshana 4.8 se-ANSI E1.11)		4	Idatha 2-
		5	Idatha 2+

IZITESHI MAP I-DMX512-RDM

IZILUNGISELELO ze-RDM

I-DMX QALA IKHELI: UKULUNGISWA KWEDIVAYISI YE-DMX CHANNEL.
Ngaphakathi kokucushwa kwe-DMX START ADDRESS, ungamisa ishaneli ye-DMX yedivayisi.

UBUNTU be-DMX: IZILUNGISELELO ZIMEPHU YEDIVAYISI
Ngaphakathi kokucushwa kwe-DMX PERSONALITY kungenzeka ukukhetha amamephu ahlukahlukene we-LINE 5CV DMX, okuhlanganisa:

I-MACRO DIMMER
DIM UKUZE UFUDUMELE

TUNABEL OMHLOPHE
I-SMART HSI RGB
I-SMART HSI RGBW

I-RGB
I-RGBW
I-MRGB+S

I-MRGBW+S
I-DIMMER
I-SMART HSI RGBW+TW

DEVICE STATE: IZILUNGISELELO ZESIMO SOKUSEBENZA KWEDIVAYISI
Ngaphakathi kwemenyu ye-DEVICE STATE kukhona ulwazi lwamahora okusebenza kanye nemijikelezo yokuvula/yokuvalwa kwedivayisi.
Lawa mapharamitha afundwa kuphela futhi awakwazi ukuhlelwa.

LAMP IMENU: IZILUNGISELELO ZAMAMANDLA EDIVAYISI
Ngaphakathi kwe-LAMP MENU' menu kungenzeka ukuchaza “LAMP ON MODE”, okungukuthi isimo sokuphumayo lapho idivayisi ivuliwe, kungakhathaliseki ukuthi Ivuliwe noma Ivaliwe ngo-100%.
Lo msebenzi unikwa amandla kuphela uma ingekho isignali ye-DMX.

DIMMER IMENU: I-DIMING curve KANYE NEZILUNGISELELO ZOKUVAMELA KWEDIVAYISI
Ngaphakathi kwe-DIMMER MENU ungakhetha ijika elifiphele elilayini, iQuadratic noma i-Exponential kanye nemvamisa yokufiphala engu-307, 667, 1333, 2000 noma 4000 Hz.

IMIYALELO ye-RDM

*IMIPHAKATHI Eceliwe*
IDISC_UNIQUE_BRANCH	✔
DISC_MUTE	✔
DISC_UN_MUTE	✔
SUPPORTED_PARAMETERS	✔
PARAMETER_DESCRIPTION	✔
DEVICE_INVO	✔
DMX_START_ADDRESS	✔
IDENTIFY_DEVICE	✔

*AMAPHRAMETHA Asekelwe*
PRODUCT_DETAIL_ID_LIST	✔
DEVICE_MODEL_DESCRIPTION	✔
MANUFACTURER_LABEL	✔
DEVICE LABEL	✔
BOOT_SOFWARE_VERSION_ID	✔
BOOT_SOFWARE_VERSION_LABEL	✔
DMX_PERSONALITY	✔
DMX_PERSONALITY_DECRIPTION	✔
I-SLOT_INFO	✔
SLOT_DESCRIPTION	✔
DEFAULT_SLOT_VALUE	✔
AMAHHALA E-DEVICE_HURS	✔
LAMP_ON_MODE	✔
DIMMER_INFO	✔
IKHEFU	✔
CURVE_DESCRIPTION	✔
IMODULATION_FREQUENCY	✔
MODULATION_FREQUENCY_DESCRIPTION	✔

IZIBALO ZOMKHETHI

QAPHELA KWEZOBUCHWEPHESHE

INSTALLATION

ISEXWAYISO: Umkhiqizo ungaxhunywa kuphela futhi ufakwe umuntu osebenza ngogesi oqeqeshiwe. Yonke imithethonqubo esebenzayo, imithetho, namakhodi wokwakha kufanele kugcinwe. Ukufakwa okungalungile komkhiqizo kungabangela umonakalo ongalungiseki kumkhiqizo nama-LED axhunyiwe.
Qaphela lapho uxhuma ama-LED. Ukuguqulwa kwe-polarity kubangela ukuthi kungakhiphi ukukhanya futhi ngokuvamile kungalimaza ama-LED.

Ukunakekela kufanele kwenziwe kuphela ngabasebenzi abaqeqeshiwe ngokuhambisana nemithethonqubo yamanje.
Umkhiqizo uklanyelwe futhi uhloselwe ukusebenzisa imithwalo ye-LED kuphela. Ukunika amandla imithwalo engeyona eye-LED kungase kuphushe umkhiqizo ngaphandle kwemikhawulo yawo ebekiwe futhi, ngakho-ke, akumbozwanga nganoma yisiphi isiqinisekiso.
Izimo zokusebenza zomkhiqizo akumele zeqe izicaciso ngokwemininingwane yedatha yomkhiqizo.
Umkhiqizo kufanele ufakwe ngaphakathi kwekhabethe le-switchgear/controlgear kanye/noma ukuvikelwa kwebhokisi lokuhlangana ekuvikelweni kwe-overvoltage.
Umkhiqizo kufanele ufakwe ume ume mpo noma ovundlile ilebula/ikhava ephezulu ibheke phezulu noma ibheke phezulu. Ezinye izikhundla azivunyelwe. Indawo engezansi ayivunyelwe (ilebula/ikhava ephezulu ibheke phansi).

Gcina amasekhethi angu-230Vac (LV) ahlukene futhi hhayi isekhethi ye-SELV kusukela ekuphepheni kwevolumu ephansi eyengeziwetage (SELV) isifunda kanye nanoma yikuphi ukuxhumana nalo mkhiqizo. Kunqatshelwe ngokuphelele ukuxhuma, nganoma yisiphi isizathu, ngokuqondile noma ngokungaqondile, i-230Vac mains vol.tage kumkhiqizo (i-terminal block yeBHASI ifakiwe).
Umkhiqizo kufanele uhlakazwe ngendlela efanele.
Ukusetshenziswa komkhiqizo ezindaweni ezinzima kungakhawulela amandla okukhiphayo.

Ezingxenyeni ezakhelwe ngaphakathi ngaphakathi kwezibani, izinga lokushisa le-ta ambient liyisiqondiso esinikezwe indawo yokusebenza efanele. Nokho, isididiyeli kufanele ngaso sonke isikhathi siqinisekise ukuphathwa okushisayo okufanele (okungukuthi ukukhweza okulungile kwedivayisi, ukugeleza komoya njll.) ukuze izinga lokushisa lephoyinti le-tc lingeqi umkhawulo ophezulu we-tc kunoma yisiphi isimo. Ukusebenza okuthembekile kanye nesikhathi sokuphila kuqinisekiswa kuphela uma izinga lokushisa eliphezulu le-tc lingeqiwe ngaphansi kwemibandela yokusetshenziswa.

UKUNIKEZWA KWAMANDLA KAGESI

Sebenzisa kuphela izinsiza zamandla ze-SELV ezinamandla alinganiselwe ekunikezeni amandla edivayisini, ukuvikela isekethe emfushane namandla kumele alinganiswe ngendlela efanele.
Endabeni yezinto zikagesi ezifakwe amatheminali aphansi, kuyimpoqo ukuxhuma WONKE amaphuzu aphansi avikelayo (PE= Protection Earth) nomhlaba wokuvikela ofanele futhi oqinisekisiwe.

Izintambo zokuxhuma phakathi kwevolumu ephansi kakhulutagUmthombo wamandla we-e kanye nomkhiqizo kumele ulinganiswe ngendlela efanele futhi kufanele uvalwe kunoma iyiphi izintambo noma ingxenye ku-non-SELV vol.tage. Sebenzisa amakhebuli avaleleke kabili.
Linganisa amandla okunikezwa kwamandla ngokuhlobene nomthwalo oxhunywe kudivayisi. Esimeni lapho ukunikezwa kwamandla kukhulu kakhulu uma kuqhathaniswa nobuningi bamanje obumuncwa, faka isivikelo ngokumelene namanje kakhulu phakathi kokunikezwa kwamandla nedivayisi.

IMIYALELO:

Ubude bezintambo ezixhuma phakathi kwemiyalelo yendawo (AKUKHO inkinobho ye-Push noma enye) kanye nomkhiqizo kufanele kube ngaphansi kuka-10m. Izintambo kufanele zibe nobukhulu ngokufanele futhi kufanele zifakwe kunoma iyiphi izintambo ezingezona ze-SELV noma ivolumutage. Kunconywa ukusebenzisa amakhebuli afakwe kabili, uma kubonakala kufanelekile futhi avikelekile.
Wonke amathuluzi namasiginali okulawula axhunywe emabhasini (i-DMX512 noma enye) kufanele kube uhlobo lwe-SELV (amadivaysi axhunyiwe kufanele abe yi-SELV noma kunoma yikuphi ukunikeza isignali ye-SELV).

OKUPHUMAYO:

Kunconywa ukuthi ubude bezintambo zokuxhuma phakathi komkhiqizo ne-module ye-LED bungaphansi kwama-3m. Amakhebuli kufanele abe nosayizi ofanele futhi kufanele avaleleke kunoma yiziphi izintambo ezingezona ze-SELV noma izingxenye. Kunconywa ukusebenzisa izintambo ezifakwe kabili. Uma ufuna ukusebenzisa izintambo zokuxhuma phakathi komkhiqizo nemojula ye-LED ubude obungaphezu kuka-3m, isifaki kufanele siqinisekise ukusebenza kahle kwesistimu. Kunoma yikuphi, ukuxhumana phakathi komkhiqizo nemojula ye-LED akumele kudlule ama-30m.

IZIMPAWU

	Yonke imikhiqizo yakhiwe ngokuthobela Iziqondiso ZaseYurophu, njengoba kubikwe ku-EU Conformity Declaration.
	Ezimele lamp Imishini yokulawula: lamp i-controlgear ehlanganisa i-elementi eyodwa noma ngaphezulu ehlukene eklanywe ngendlela yokuthi ikwazi ukukhwezwa ngokuhlukana ngaphandle kwe-luminaire, ngokuvikelwa ngokuya ngokumakwa kwe-l.amp controlgear futhi ngaphandle noma iyiphi ebiyelwe eyengeziwe
	“I-Safety Extra Low Voltage” kusekethe ehlukanisiwe kokunikezwayo kwamapayipi ngokufaka okungengaphansi kwalokho okuphakathi kwamasekethe ayisisekelo nawesibili e-transformer ehlukanisayo yokuphepha ngokuya nge-IEC 61558-2-6.
	Ekupheleni kwesikhathi sokusebenziseka umkhiqizo ochazwe kule datha uhlukaniswa njengodoti ophuma ezintweni zikagesi, futhi awukwazi ukulahlwa kanye nemfucuza kamasipala engahlukanisiwe. Isexwayiso! Ukulahlwa okungalungile kwalo mkhiqizo kungase kubangele umonakalo omkhulu endaweni ezungezile nempilo yabantu. Sicela waziswe mayelana nezinqubo ezifanele zokulahlwa kwemfucuza kanye nokucutshungulwa okuhlinzekwa yiziphathimandla zendawo.

LIGHTAPP

UKUQALA NOKUFAKA KOKUQALA

QALA ISIKRINI
Kulesi sikrini, uhlelo lokusebenza lulinda amapharamitha wedivayisi ukuthi afundwe.
Ukuze ufunde amapharamitha, mane ulethe ingemuva le-smartphone eduze nelebula yedivayisi. Indawo ezwela ukufunda ye-smartphone ingahluka kuye ngemodeli.
Uma uxhumano selumisiwe, isikrini esilayisha ngokushesha sizovela. Kufanele uhlale usesimweni nge-smartphone yakho kuze kube yilapho imingcele isilayishwe ngokugcwele.

Okuhlukile kwe-iOS: Ukuze ufunde amapharamitha, udinga ukucindezela inkinobho ethi SKENA phezulu kwesokudla. I-pop-up izovela ebonisa ukuthi i-smartphone yakho isilungele ukuskenwa nini. Sondeza i-smartphone kudivayisi futhi uhlale endaweni kuze kube yilapho imingcele isilayishwe ngokugcwele.

IZILUNGISELELO KANYE NEZIKRINI ZOKUlayishwa kwe-FIRMWARE

IZILUNGISELELO

Ekhasini lezilungiselelo ungasetha:

Ulimi lohlelo lokusebenza
Iphasiwedi: Izosetshenziselwa ukubhala imingcele.

I-FIRMWARE

Ekhasini le-firmware, ungabuyekeza i-firmware yedivayisi.
Okuceliwe file kufanele kube okohlobo *.bin.
Once the file ilayishiwe, landela imiyalelo esesikrinini.

QAPHELA:

Uma inqubo isiqalile, ayinakuguqulwa futhi akwenzeki ukuyimisa isikhashana.
Uma kwenzeka kuba nokuphazamiseka i-firmware izokonakala. Kulokhu idivayisi izodinga ukuphinda inqubo yokulayisha.

Ekupheleni kokulayisha i-firmware, wonke amapharamitha asethwe ngaphambilini azosethwa kabusha abe amanani efekthri.
Uma isibuyekezo siphumelele futhi inguqulo elayishiwe ihlukile kwedlule, idivayisi izokwenza ukukhanya okungu-10

Ilayisha amapharamitha

KUBALULEKILE: Ukubhalwa kwamapharamitha kufanele kwenziwe uma idivayisi ivaliwe (ngaphandle kwamandla okufaka).

FUNDA
Ngohlelo lokusebenza olukumodi ethi FUNDA, i-smartphone izoskena idivayisi futhi ibonise ukucushwa kwayo kwamanje esikrinini.

BHALA
Ngohlelo lokusebenza olukwimodi ethi BHALA, i-smartphone izobhala ukucushwa kwemingcele esethwe esikrinini ngaphakathi kwedivayisi.

Bhala konke
Kwimodi evamile (Bhala Konke) uhlelo lokusebenza lubhala kuphela amapharamitha ashintshile kusukela ekufundweni kwangaphambilini. Kule modi, ukubhala kuzophumelela kuphela uma inombolo ye-serial yedivayisi ifana naleyo efundwe ngaphambilini.

Kumodi Yokubhala Konke, wonke amapharamitha abhaliwe. Kule modi, ukubhala kuzophumelela kuphela uma imodeli yedivayisi ifana naleyo efundwe ngaphambilini.
Kunconywa ukuthi uvule imodi Yokubhala Konke kuphela uma udinga ukuphindaphinda ukucushwa okufanayo kwamanye amadivaysi amaningi emodeli efanayo.

BHALA ISIVIKELO

Usebenzisa inkinobho yokukhiya, ungasetha ibhulokhi lapho ubhala amapharamitha. Isikrini sokufaka iphasiwedi enezinhlamvu ezi-4 sizovela. Uma le phasiwedi isibhaliwe kudivayisi, zonke izinguquko ezilandelayo zepharamitha zingenziwa kuphela uma iphasiwedi elungile ibhalwe ekhasini lezilungiselelo lohlelo lokusebenza.

Ukuze ususe ukhiye wephasiwedi, mane ucindezele inkinobho yokuvala bese ushiya inkambu Yephasiwedi ingenalutho.

IPHUTHA LOKUBHALA
Uma, ngemva kokubhala imingcele, uma uyibuyisela emuva, idivayisi ikhanya izikhathi ezingu-2 ngomzuzwana ngokuqhubekayo, kusho ukuthi ukubhala akuzange kuphumelele. Ngakho-ke, udinga ukwenza lezi zinyathelo ezilandelayo:

Vala idivayisi.
Phinda ubhale amapharamitha.

Linda ukuthi umbhalo uphumelele noma kungabikho milayezo yephutha ezovela.
Vula idivayisi futhi.

Uma kungasebenzi, ungenza ukusetha kabusha kwasekuqaleni ngokucisha ngokushesha idivayisi futhi uyivule izikhathi eziyisi-6.

ULWAZI LOMKHIQIZO

Igama Lomkhiqizo: Inkambu ehlelekayo yomsebenzisi ukuze uthole ukuhlonza kalula. Ngokuzenzakalelayo, igama lomkhiqizo liyafana nenkambu Yemodeli.

Imodeli: Inkambu engaguquleki. Ikhomba imodeli yedivayisi.
Inombolo yomkhiqizo: Le nkambu ayikwazi ukuhlelwa. Ikhomba ngokuhlukile isifanekiso.
Inguqulo ye-Firmware: inkambu ayihleleki. Ihlonza inguqulo ye-firmware elayishwe manje kudivayisi.

IMPOSTAZION DI CONTROLLO

Imvamisa ye-PWM: ikuvumela ukuthi usethe imvamisa yokuguquguquka kwe-PWM kokuphumayo.
QAPHELA: Ezisetshenziswa ezimweni ezishisayo ezishisayo, kuyancomeka ukwehlisa imvamisa ye-PWM ibe ubuncane (307 Hz)
Ijika elifiphalisayo: Ukuze uthole imininingwane, bheka isigaba se-Dimming Curves semanuwali yedivayisi
Uhlobo lokulawula: Ukukhethwa kwemephu yokulawula (bona isigaba esilandelayo).

IZINHLOBO ZOKULAWULA

Ngaphakathi kokucushwa kokuthi “Uhlobo Lokulawula” kungenzeka ukhethe amamephu ahlukahlukene we-LINE-5CV-DMX, okuhlanganisa:

I-MACRO DIMMER
DIM UKUZE UFUDUMELE
OKUMHLOPHE
I-SMART HSI-RGB
I-SMART HSI-RGBW
I-RGB
I-RGBW
I-MRGB+S
I-MRGBW+S
I-DIMMER
I-SMART HSI RGBW+TW

I-DMX ADDRESS
Kuhlobo ngalunye lokulawula, ikheli le-DMX locingo lingachazwa phakathi kwebanga (0 ÷ 512).

IZILUNGISELELO ZAMAMANDLA

Kuye ngohlobo lokulawula olukhethiwe (“Smart HSI-RGB” ku-example image) kushaneli ngayinye yokukhiphayo kungenzeka ukusetha ileveli yokuqala yokuvula: ngesikhathi sokukhipha amandla futhi uma ingekho isignali ye-DMX, idivayisi izoletha okuphumayo kumazinga asethwe kulesi sigaba.
Kungenzeka futhi ukusetha ukukhumbula ngekhanda izinga lokugcina elitholakalayo ngesikhathi sokuvala shaqa (isb. uma amandla ehluleka), ngokukhetha inketho ethi “Izinga Lokugcina”: kulokhu, ngesikhathi sokushintsha nalapho kungekho Isignali ye-DMX, idivayisi izoletha okuphumayo kumazinga agcinwe ngesikhathi sesigaba sokuvala shaqa.
Ukuze uthole ulwazi olwengeziwe mayelana nokucushwa kweziteshi namaleveli okukhiphayo, bheka isigaba se-“DMX512-RDM Channel Maps” sale manuwali.

I-DALCNET Srl
36077 Altavilla Vicentina (VI) - Italy
Via Lago di Garda, 22

Ucingo. +39 0444 1836680
www.dalcnet.com
info@dalcnet.com
Rev. 08/04/2024 - Ikhasi. 18/18

Amadokhumenti / Izinsiza

I-DALC NET LINE-5CV-DMX Voltage I-Output For Strip LED kanye ne-LED Module [pdf] Imaniwali yosebenzisayo
I-LINE-5CV-DMX Voltage I-Output For Strip LED kanye ne-LED Module, LINE-5CV-DMX, Voltage I-Output For Strip LED kanye ne-LED Module, Strip LED kanye ne-LED Module, i-LED Module

Izithenjwa

Imaniwali yosebenzisayo

I-DALC NET LINE-5CV-DMX Voltage I-Output For Strip LED kanye ne-LED Module

Imiyalo yokusetshenziswa komkhiqizo