DALC NET LINE-5CV-DMX Voltage Output For Strip LED le LED Module Bukana ea Mosebelisi

Tlhophiso ka Dalcnet LightApp:
LINE-5CV-DMX e ka hlophisoa ho sebelisoa sesebelisoa sa mohala sa Dalcnet LightApp. Fetola li-parameter tse kang dimming frequency, dimming curve, boemo bo phahameng le bo fokolang ba khanya, joalo-joalo. LightApp e fumaneha bakeng sa ho khoasolla ho tloha Apple App Store le Google Play Store.

Kemiso:
Sheba setšoantšo sa wiring se fanoeng bukeng ea ho kenya letsoho ka nepo. Netefatsa likhokahano tse nepahetseng bakeng sa seta e batloang.

Ho beha liparamente:
Sebelisa LightApp kapa RDM ho beha liparamente tse kang PWM Frequency, Adjustment Curve, Power On Levels, le DMX Personality.

Litaelo tsa Ts'ebetso:

Ts'ebetso ea Soft On/Off: E nolofalletsa phetisetso ea motlakase butle-butle hore e sebetse hantle.
Soft Brightness Dimming: E lumella litokiso tsa khanya e bonolo.

Tšireletso ea Potoloho e Khutšoane: E sireletsa liphetho tsa LED ho tsoa ts'enyo haeba ho ka ba le potoloho e khuts'oane.
Kenyelletso ea Opto-Isolated DMX: E netefatsa kamohelo e bolokehileng le e tšepahalang ea lets'oao la DMX.

E Atolositsoeng Tempereichara Range: E sebetsa ka har'a mefuta e fapaneng ea mocheso bakeng sa tšebeliso e fapaneng.
Teko ea Ts'ebetso: Etsa tlhahlobo ea ts'ebetso ea 100% pele o sebetsa ka botlalo ho netefatsa ts'ebetso e nepahetseng.

LBH:

Q: Nka fumana bukana ea morao-rao ea morao-rao hokae?
A: Bakeng sa phetolelo ea morao-rao ea matsoho, etela www.dalcnet.com kapa hlahloba khoutu ea QR sesebelisoa sa hau.

LIKAROLOANA

DIMMER LED
Phepelo ea Matla: 12-24-48 Vdc
Moqtage Output for strip LED le LED module
WHITE, MONOCOLOR, DYNAMIC WHITE, RGB, RGB+W, RGB+WW le RGB+TW Light Control
Taelo ea BUS:: DMX512-A+RDM
Sebopeho sa sesebelisoa se sebelisa sesebelisoa sa mohala sa Dalcnet LightApp
Uscite in tensione costante per carichi R
Phetoho ea PWM ho tloha ho 300 ho isa ho 4000 Hz
Liparamente tse ka beoang ho tsoa ho APP le ka RDM:
- Maqhubu a PWM
- Phetoho ea phetoho
- Matla a Maemo
- Botho DMX

Pontšo ea lihora tsa ts'ebetso le lipotoloho tsa mollo
Tšireletso ea nako e khutšoanyane ho lihlahisoa tsa LED
Kenyelletso ea Opto-Isolated DMX

Bonolo ho/ho tima
Khanya e bonolo e fifala
Nako e telele ea mocheso

100% Teko e sebetsang

TLHALOSO EA SEHLAHISOA

LINE-5CV-DMX ke 5-channel output LED dimmer, e ka laoloang ka taolo ea DMX BUS.
LED dimmer e loketse ho khanna meroalo e kang StripLEDs le LED modules, White, Single-color, Dynamic White, RGB, RGB + W, RGB + WW le RGB + TW ka nako e telele.tage. Motlakase oa 12-24-48 Vdc o ka hokeloa.

Boholo ba tlhahiso ea hona joale ke 12A. The dimmer LED e na le litšireletso tse latelang: tšireletso ea potoloho e khuts'oane ho lisebelisoa tsa LED, ts'ireletso ea matla a fetang matla, ts'ireletso ea reverse polarity, le tšireletso ea fuse ea ho kenya.
Ka sesebelisoa sa mohala sa Dalcnet LightApp, hoa khonahala ho hlophisa liparamente tse ngata tsa LINE-5CV-DMX joalo ka maqhubu a dimming, dimming curve, max le min lightness level, jj.
LightApp e ka khoasolloa mahala ho Apple App Store le Google Play Store.

⇢ Bakeng sa bukana ea morao-rao, ka kopo etela rona websebaka: www.dalcnet.com kapa Khoutu ea QR ka kotloloho sesebelisoa sa hau.

SEHLAHLWA KHOUTU

KHOUTU	PHEPELO EA MOTLAKASE	LITLHAKU TSE KHOLO LED	N° KHALE	TAELO LEBESE	SEBELISA APP
LINE-5CV-DMX	12-24-48 VDC	5 x 5A (max 12A)1	5	DMX512-RDM	APP: LIGHT APP

TS'IRELETSO

OVP	Ho feta-voltage tshireletso2	✔
RVP	Tšireletso e khutlisetsang morao polarity2	✔
IFP	Tšireletso e nang le fuse ea ho kenya2	✔
SCP	Tšireletso e khutšoanyane ea potoloho	✔

TŠEBELETSO MAEMO

EN 55015	Meeli le mekhoa ea ho lekanya litšobotsi tsa tšitiso ea seea-le-moea tsa mabone a motlakase le lisebelisoa tse tšoanang
EN 61547	Thepa bakeng sa mabone a akaretsang - Tlhokahalo ea boits'ireletso ba EMC
EN 61347-1	Lamp Controlgear - Karolo ea 1: Tlhokahalo e akaretsang le polokeho
EN 61347-2-13	Lamp Controlgear - Karolo ea 2-13: Tlhokahalo e khethehileng bakeng sa DC kapa ac e fanoeng ka elektroniki ea Controlgear bakeng sa li-module tsa LED
ANSI E1.11	Theknoloji ea Boithabiso - USITT DMX512-A - Asynchronous Serial Digital Transmission Standard bakeng sa ho Laola Thepa ea Lebone le Lisebelisoa.
ANSI E1.20	Theknoloji ea Boithabiso-RDM-Remote Device Management holim'a USITT DMX512 Networks

LIEKETSENG MOKHOPO

			LINE 5CV DMX
DC voltage fapaneng			Min: 10,8Vdc - Max: 52,8Vdc
Sephetho voltage			=Vin
Phepelo ea hajoale			Boholo ba 12A
Sephetho sa hajoale3			5x boholo 5A	max 12A Totali
Matla a lebitso		12vc	60W	Matla a 144W
		24vc	120W	Matla a 288W
		48vc	240W	Matla a 576W
Ho lahleheloa ke matla boemong ba standby			<0,5W
Mofuta oa meroalo4			R
Li-curve tse fokolang5			Linear – Quadratic – Exponential
Mokhoa oa ho fifatsa			Pulse Width Modulation "PWM"
Maqhubu a PWM5			307 - 667 - 1333 - 2000 - 4000 Hz
Qeto ea PWM			16 bit
Mocheso oa polokelo			Ka tlase: -40°C – Max: 60°C
Mocheso o sebetsang oa tikoloho, Ta3			Ka tlase: -10°C – Max: 60°C
Mofuta oa sehokedi			Morsetti Push-In
Karolo ea lithapo	Boholo bo Tiileng		0,2 ÷ 1,5 mm2 / 24 ÷ 16 AWG
	Stranded Size
Bolelele ba khoele			9 ÷ 10 limilimithara
Sehlopha sa tšireletso ea IP			IP20
Casing Material			Plastica
Likarolo tsa ho paka (likotoana/liyuniti)			1pz
Litekanyo Mechanical			186 x 29 x 21 limilimithara
Litekanyo tsa ho paka			197 x 34 x 29 limilimithara
Boima ba 'mele			80g

LETŠOANTŠO LEOOETSOANG

Latela mehato e ka tlase bakeng sa ho kenya sehlahisoa joalokaha ho bontšitsoe setšoantšong sa khokahano:

Khokahano ea mojaro: hokela phalliso ea LED ho terminal "L" le letšoao la "+", sebakeng sa li-negative tsa mojaro oa LED ho li-terminals "L1", "L2", "L3", "L4" le "L5" ka letšoao la "-" .

Khokahano ea DMX-RDM BUS: hokela mats'oao a DATA+, DATA- le COM ka ho latellana ho "DMX" ka matšoao a "D+" "D-" "COM". Etsa bonnete ba hore ha o hokele likarolo tse phelang ho litheminale tsa "INPUT".
Khokahano ea phepelo: hokela 12-24-48 Vdc kamehla voltagphepelo ea matla a SELV (ho ipapisitse le litšobotsi tsa tekheniki tsa mojaro oa LED) ho terminal ea DC IN e nang le matšoao a "+" le "-".
Etsa bonnete ba hore ha u sebelise motlakase o nang le tlhahiso e sa khaotseng ea hona joale 'me u hlahlobe hore polarity ea likhoele e nepahetse.

TŠEBELETSO EA KHOPO: PERSONALITY DIMMER & MACRO DIMMER HO FIHLELA MERARO E 5 E TŠOEU KAPA MONOCHROME

TŠEBELETSO EA KHOPO:
PERSONALITY DIM HO FUDULELA LE TŠEOE E TŠOANENG HO FIHLA HO FIHLELA MERARO E 2 HO FIHLELA HO FUMANA KAPA TŠEOE E TLOSILENG.

TS'OANELO TS'OANELO

Ka lebaka la maqhubu a eona a 4kHz a dimming, LINE-5CV-DMX e fokotsa ka katleho ketsahalo ea ketsahalo ea Flicker. Ho ipapisitse le kutloelo-bohloko ea motho le mofuta oa mesebetsi ea bona, ho panya-panya ho ka ama bophelo bo botle ba motho, leha liphetoho tsa khanya li feta moeli o ka bonoang ke leihlo la motho.
Kerafo e bonts'a ts'ebetso ea Ho Flickering ho maqhubu, e lekantsoeng ho pholletsa le sebaka sa ho fifala.
Liphetho li bonts'a sebaka se nang le kotsi e tlase (e mosehla) le sebaka se se nang phello (e tala). E hlalosoa ke IEEE 1789-20156

TS'OOA LEKHOPO

DMX+RDM TŠEBELETSO EA LIBESE

KA MOKHOA OA BOSE oa DMX+ RDM "MAKHOBA", LITLHAKISO LI LAOA KA TAOLI EA KA NTLE EA DMX.

LITEKELO TSA TŠEBELETSO BAKENG SA BESE ea DMX512+RDM

ANSI E1.11	Theknoloji ea Boithabiso - USITT DMX512-A - Asynchronous Serial Digital Transmission Standard bakeng sa ho Laola Thepa ea Lebone le Lisebelisoa.
ANSI E1.20	Theknoloji ea Boithabiso-RDM-Remote Device Management holim'a USITT DMX512 Networks

PIN OUT 3 LE 5 PIN XLR CONNECTORS

SEBELISA	3-PIN XLR Pin #	5-PIN XLR Pin #	Setšoantšo sa DMX512
Tšebeliso e tloaelehileng	1	1	Data Link Common
Sehokelo sa Lintlha tsa mantlha	2	2	Lintlha 1-
Sehokelo sa Lintlha tsa mantlha	3	3	Lintlha 1+
Sehokelo sa Lintlha tsa Bobeli (Ka boikhethelo - sheba temana ea 4.8 ea ANSI E1.11)		4	Lintlha 2-
		5	Lintlha 2+

LICHANELO MAP DMX512-RDM

LIEKETSENG RDM

DMX QALA ADDRESS: SEHLOOHO DMX CHANNEL SEBAKA.
Ka har'a tlhophiso ea DMX START ADDRESS, o ka lokisa mocha oa DMX oa sesebelisoa.

DMX PERSONALITY: SESEBETSI MAPESE
Ka har'a tlhophiso ea DMX PERSONALITY hoa khoneha ho khetha limmapa tse fapaneng tsa LINE 5CV DMX, ho kenyelletsa:

MACRO DIMMER
TS'OA MOFUDUO

TUNABEL TŠOEU
SMART HSI RGB
SMART HSI RGBW

RGB
RGBW
MRGB+S

MRGBW+S
FIHLELANG
SMART HSI RGBW+TW

DEVICE STATE: LIEKETSO TSA MAEMO A TSAMAISO EA SESEBETSI
Ka har'a lethathamo la DEVICE STATE ho na le tlhaiso-leseling mabapi le lihora tsa ts'ebetso le linako tsa ho tima / ho tima sesebelisoa.
Liparamente tsena ke tsa ho bala feela 'me ha li khone ho fetoloa.

LAMP MENU: LITLHAKISO TSA MATLA A SESEBETSI SA MATLA
Ka har'a LAMP MENU' menu ea khoneha ho hlalosa "LAMP ON MODE”, ke hore boemo ba sephetho ha sesebelisoa se buletsoe, ebang ke 100% Buletsoe kapa Koa.
Ts'ebetso ena e etsoa feela ha lets'oao la DMX le le sieo.

DIMMER MENU: DIMMING CURVE LE FREQUENCY SETTINGS TSA SESEBETSI
Ka har'a DIMMER MENU u ka khetha Mokokotlo oa ho fifala ha Linear, Quadratic kapa Exponential le frequency ea ho fifala 307, 667, 1333, 2000 kapa 4000 Hz.

RDM MOLAOLI

*KOPO LITŠOANTŠISO*
TLHOKOMELISOE_BRANCH	✔
DISC_MUTE	✔
DISC_UN_MUTE	✔
SUPPORTED_PARAMETERS	✔
PARAMETER_DESCRIPTION	✔
DEVICE_INVO	✔
DMX_START_ADDRESS	✔
IDENTIFY_DEVICE	✔

*RETS'ELISITSOE LITŠOANTŠISO*
PRODUCT_DETAIL_ID_LIST	✔
DEVICE_MODEL_DESCRIPTION	✔
MANUFACTURER_LABEL	✔
SESEBETSI LABEL	✔
BOOT_SOFWARE_VERSION_ID	✔
BOOT_SOFWARE_VERSION_LABEL	✔
DMX_PERSONALITY	✔
DMX_PERSONALITY_DECRIPTION	✔
Slot_INFO	✔
SLOT_DESCRIPTION	✔
PUSELETSOT_SLOT_VALUE	✔
LIEKETSENG LIEKETSENG	✔
LAMP_ON_MODE	✔
DIMMER_INFO	✔
KHABANE	✔
CURVE_DESCRIPTION	✔
TLHALISO_FREQUENCY	✔
MODULATION_FREQUENCY_DESCRIPTION	✔

LIEKETSENG MOCHA

TLHOKOMELO TEKENYANE

KENYA

TLHOKOMELISO: Sehlahisoa se ka kopanngoa feela le ho kenngoa ke ramotlakase ea tšoanelehang. Melao eohle e sebetsang, melao le likhoutu tsa meaho li tlameha ho bolokoa. Ho kenya sehlahisoa ka mokhoa o fosahetseng ho ka baka tšenyo e ke keng ea lokisoa ho sehlahisoa le li-LED tse hokahaneng.
E-ba hlokolosi ha u hokahanya li-LED. Ho fetoha ha polarity ho etsa hore ho se be le khanya 'me hangata ho ka senya li-LED.

Tlhokomelo e tlameha ho etsoa feela ke basebetsi ba tšoanelehang ho latela melao ea hajoale.
Sehlahisoa se etselitsoe 'me se reretsoe ho tsamaisa meroalo ea LED feela. Ho matlafatsa meroalo eo e seng ea LED ho ka sutumelletsa sehlahisoa ka ntle ho meeli ea moralo o boletsoeng, ka hona, ha se koaheloe ke waranti efe kapa efe.
Maemo a ts'ebetso ea sehlahisoa a kanna a se fete litekanyo ho latela datha ea sehlahisoa.
Sehlahisoa se tlameha ho kenngoa ka har'a khabinete ea switchgear / controlgear le / kapa tšireletso ea lebokose la junction khahlano le ho fetellatage.
Sehlahisoa se tlameha ho kenngoa sebakeng se otlolohileng kapa se tšekaletseng 'me leibole/sekoahelo se ka holimo se shebile holimo kapa holimo. Maemo a mang ha a lumelloe. Boemo bo ka tlase ha boa lumelloa (leibole/sekoahelo se ka holimo se shebile fatše).

Boloka li-circuits tse arohaneng tsa 230Vac (LV) eseng seketsoana sa SELV ho tloha polokehong e tlase haholotage (SELV) potoloho le ho tloha leha e le efe mabapi le sehlahisoa sena. Ho thibetsoe ho hang ho hokahanya, ka lebaka lefe kapa lefe, ka kotloloho kapa ka mokhoa o sa tobang, 230Vac mains vol.tage ho sehlahiswa (terminal block of BUS kenyeleditswe).
Sehlahisoa se tlameha ho qhaloa ka nepo.
Tšebeliso ea sehlahisoa maemong a thata e ka fokotsa matla a tlhahiso.

Bakeng sa lisebelisoa tse hahelletsoeng ka har'a mabone, mocheso oa ta ambient ke tataiso e fanoeng bakeng sa tikoloho e nepahetseng ea ts'ebetso. Leha ho le joalo, integrator e tlameha ho lula e netefatsa tsamaiso e nepahetseng ea mocheso (ke hore, ho kenya mochine ka nepo, phallo ea moea joalo-joalo) e le hore mocheso oa tc o se ke oa feta tekanyo e phahameng ea tc maemong afe kapa afe. Ts'ebetso e tšepahalang le bophelo bohle bo tiisitsoe feela haeba mocheso o phahameng oa tc o sa fete tlas'a maemo a ts'ebeliso.

PHEPELO EA MOTLAKASE

Sebelisa feela lisebelisoa tsa motlakase tsa SELV tse nang le hona joale tse lekantsoeng bakeng sa phepelo ea motlakase ea sesebelisoa, ts'ireletso ea potoloho e khuts'oane le matla a tlameha ho lekanngoa ka nepo.
Tabeng ea lisebelisoa tsa motlakase tse nang le li-terminals tsa fatše, hoa hlokahala ho hokahanya lintlha TSOHLE tse sireletsang fatše (PE= Tšireletso ea Lefatše) le lefats'e la tšireletso le nepahetseng le le tiisitsoeng.

Lithapo tsa khokahano lipakeng tsa molumo o tlase haholotagmohloli oa matla a motlakase le sehlahisoa li tlameha ho ba le boholo bo nepahetseng 'me li tlameha ho koaheloa ho tloha ho terata kapa karolo efe kapa efe ho non-SELV vol.tage. Sebelisa lithapo tse sirelelitsoeng habeli.
Tekanyo ea matla a phepelo ea motlakase mabapi le mojaro o hokahaneng le sesebelisoa. Haeba phepelo ea motlakase e phahame haholo ha e bapisoa le boholo bo monyelitsoeng hajoale, kenya ts'ireletso khahlanong le ho feta hona joale lipakeng tsa phepelo ea motlakase le sesebelisoa.

MELAO:

Bolelele ba likhoele tse hokahanyang lipakeng tsa litaelo tsa lehae (NO Push konopo kapa tse ling) le sehlahisoa se tlameha ho ba tlase ho 10m. Lithapo li tlameha ho lekanngoa ka mokhoa o nepahetseng 'me li tlameha ho koaheloa ho tloha ho lithapo kapa lithapo life kapa life tseo e seng tsa SELVtage. Ho khothalletsoa ho sebelisa likhoele tse kentsoeng habeli, haeba ho bonahala li loketse, le tsona li sirelelitsoe.
Lisebelisoa tsohle le matšoao a taolo a hokahaneng le libese (DMX512 kapa tse ling) li tlameha ho ba tsa mofuta oa SELV (lisebelisoa tse hoketsoeng li tlameha ho ba SELV kapa maemong afe kapa afe li fane ka lets'oao la SELV).

LIPHETOHO:

Ho khothalletsoa hore bolelele ba likhoele tsa khokahano lipakeng tsa sehlahisoa le module ea LED bo ka tlase ho 3m. Lithapo li tlameha ho lekana hantle 'me li tlameha ho koaheloa ho tloha mehala kapa likarolo tse ling tseo e seng tsa SELV. Ho kgothaletswa ho sebedisa mehala e kentsoeng habeli. Haeba u batla ho sebelisa likhoele tsa khokahano lipakeng tsa sehlahisoa le mojule oa LED nako e telele ho feta 3m, sesebelisoa se tlameha ho netefatsa ts'ebetso e nepahetseng ea sistimi. Leha ho le joalo, kamano pakeng tsa sehlahisoa le module ea LED ha ea lokela ho feta 30m.

LIEKETSENG LITŠOANELO

	Lihlahisoa tsohle li entsoe ho latela Litaelo tsa Europe, joalo ka ha ho tlalehiloe ho EU Conformity Declaration.
	Ea ikemetseng lamp Lisebelisoa tsa ho laola: lamp controlgear e nang le ntho e le 'ngoe kapa tse ling tse arohaneng tse etselitsoeng hore li khone ho beoa ka thoko ka ntle ho lebone, ka tšireletso ho latela letšoao la l.amp controlgear le ntle le kampetsoeng efe kapa efe e eketsehileng
	"Safety Extra Low Voltage" potolohong e arohaneng le phepelo ea mantlha ka ho kenella ka har'a li-circuits tsa mantlha le tsa bobeli tsa transformer e ikhethileng ho latela IEC 61558-2-6.
	Qetellong ea bophelo ba eona ba bohlokoa, sehlahisoa se hlalositsoeng lethathamong lena se khetholloa e le litšila tse tsoang thepa ea elektroniki, 'me e ke ke ea lahleloa hammoho le litšila tse thata tse ke keng tsa aroloa. Tlhokomeliso! Ho lahloa ka tsela e fosahetseng ha sehlahisoa sena ho ka baka tšenyo e kholo tikolohong le bophelong ba batho. Ka kopo, tsebisoa ka mekhoa e nepahetseng ea ho lahla litšila le ho bokelloa ha litšila tse fanoeng ke ba boholong sebakeng seo.

KHANYAAPP

QALANG LE HO KENYA PELE

TS'ELISO TS'OANE
Skrineng sena, sesebelisoa se emela hore liparamente tsa sesebelisoa li baloe.
Ho bala li-parameter, tlisa feela mokokotlo oa smartphone haufi le leibole ea sesebelisoa. Sebaka sa ho bala ha smartphone se ka fapana ho latela mohlala.
Hang ha khokahano e se e thehiloe, skrine ea ho kenya kapele e tla hlaha. U tlameha ho lula u le boemong ba smartphone ea hau ho fihlela liparamente li tlatsitsoe ka botlalo.

Mofuta oa iOS: Ho bala liparamente, u lokela ho tobetsa konopo ea SCAN ka holimo ka ho le letona. Ho tla hlaha pop-up e bonts'ang ha smartphone ea hau e se e loketse ho skena. Tsamaisa smartphone haufi le sesebelisoa 'me u lule u le teng ho fihlela li-parameter li jere ka botlalo.

LITLHAKISO LE LITŠOANTŠISO TSA FIRMWARE TSA HO LEKA

LIEKETSENG

Leqepheng la litlhophiso u ka seta:

Puo ea app
Lekunutu: E tla sebedisoa bakeng sa ho ngola dipharamitha.

TLHOKOMELO

Leqepheng la firmware, o ka ntlafatsa firmware ea sesebelisoa.
E koptjoe file e tlameha ho ba ea mofuta oa *.bin.
Hang ha file e kentsoe, latela litaelo tse skrineng.

HLOKOMELA:

Hang ha ts'ebetso e se e qalile, e ke ke ea fetoloa 'me ha ho khonehe ho e emisa.
Haeba ho ka ba le tšitiso, firmware e ne e tla senyeha. Tabeng ena sesebelisoa se tla hloka ho pheta mokhoa oa ho kenya.

Qetellong ea ho kenya firmware, litekanyo tsohle tse behiloeng pele li tla tsosolosoa ho litekanyetso tsa fektheri.
Haeba ntjhafatso e atlehile mme mofuta o jarollotsoeng o fapane le o fetileng, sesebelisoa se tla etsa likhase tse 10

RELEBOHILE LITŠOANTŠISO

BOHLOKOA: Ho ngola li-parameter ho tlameha ho etsoa ha sesebelisoa se tima (ntle le matla a ho kenya).

BALA
Ka sesebelisoa ka mokhoa oa BALA, smartphone e tla hlahloba sesebelisoa ebe e bonts'a tlhophiso ea eona ea hajoale skrineng.

HLAKOLA
Ka sesebelisoa ka mokhoa oa WRITE, smartphone e tla ngola tlhophiso ea li-parameter tse behiloeng skrineng ka har'a sesebelisoa.

Ngola kaofela
Ka mokhoa o tloaelehileng (Ngola Tsohle) sesebelisoa se ngola feela li-parameter tse fetohileng ho tloha ha ho baloa pele. Ka mokhoa ona, ho ngola ho tla atleha feela haeba nomoro ea serial ea sesebelisoa e lumellana le e baliloeng pele.

Ka mokhoa oa Ngola Tsohle, li-parameter tsohle lia ngoloa. Ka mokhoa ona, ho ngola ho tla atleha hafeela mohlala oa sesebelisoa o lumellana le o baliloeng pele.
Ho kgothaletswa ho kenya tshebetsong mokgwa wa Ngola Tsohle ha feela o hloka ho etsa phetiso e tshwanang ho disebediswa tse ding tse ngata tsa mofuta o tshwanang.

HLALELE TS'IRELETSO

U sebelisa konopo ea padlock, u ka beha block ha u ngola liparamente. Ho tla hlaha skrine bakeng sa ho kenya phasewete ea litlhaku tse 4. Hang ha phasewete ena e ngotsoe ho sesebelisoa, liphetoho tsohle tse latelang tsa parameter li ka etsoa feela haeba password e nepahetseng e ngotsoe leqepheng la Litlhophiso la app.

Ho tlosa senotlolo sa senotlolo, tobetsa feela konopo ea senotlolo ebe u siea sebaka sa Password se se na letho.

MOLAO PHOSO
Haeba, ka mor'a ho ngola li-parameter, ha u e khutlisetsa morao, sesebelisoa se khantša ka makhetlo a 2 ka motsotsoana ka ho tsoelang pele, ho bolela hore ho ngola ha hoa atleha. Ka hona, o hloka ho etsa mehato e latelang:

Koala sesebelisoa.
Ngola liparamente bocha.

Emela hore mongolo o atlehe kapa hore ho se be le melaetsa ea liphoso e hlahang.
Bulela sesebelisoa hape.

Haeba e sa sebetse, o ka etsa reset ea fektheri ka ho tima sesebelisoa ka potlako le ka makhetlo a 6.

LIHLAHISO TSEBISO

Lebitso la Sehlahiswa: Sebaka se ka sebelisoang ke mosebelisi bakeng sa ho tsebahatsa habonolo. Ka ho sa feleng, lebitso la sehlahisoa le tšoana le tšimo ea Model.

Mohlala: Sebaka se sa fetoheng. E khetholla mofuta oa sesebelisoa.
Nomoro ea letoto: Sebaka sena ha se khone ho fetoloa. E khetholla mohlala ka mokhoa o ikhethileng.
Mofuta oa firmware: lebala le sa fetoleheng. E supa mofuta oa firmware o kentsoeng sesebelisoa hajoale.

IMPOSTAZION DI CONTROLLO

Maqhubu a PWM: eu lumella ho beha khafetsa ea ho feto-fetoha ha PWM ea tlhahiso.
HLOKOMELA: Bakeng sa lits'ebetso tse maemong a matla a mocheso, ho bohlokoa ho theola maqhubu a PWM bonyane (307 Hz)
Lekhalo le fifalang: Bakeng sa lintlha, sheba karolo ea Dimming Curves bukeng ea lisebelisoa
Mofuta oa taolo: Khetho ea 'mapa oa taolo (sheba serapa se latelang).

TAOLI MEFUTA

Ka har'a tlhophiso ea "Mofuta oa Taolo" hoa khoneha ho khetha limmapa tse fapaneng tsa LINE-5CV-DMX, ho kenyelletsa:

MACRO DIMMER
TS'OA MOFUDUO
TŠOEOA TŠOEU
SMART HSI-RGB
SMART HSI-RGBW
RGB
RGBW
MRGB+S
MRGBW+S
FIHLELANG
SMART HSI RGBW+TW

HO LEBELLA DMX
Bakeng sa mofuta o mong le o mong oa taolo, aterese ea DMX ea sesebelisoa e ka hlalosoa ka har'a marang-rang (0 ÷ 512).

MATLA-BAKA

Ho latela mofuta oa taolo e khethiloeng ("Smart HSI-RGB" ho example image) bakeng sa mocha o mong le o mong oa tlhahiso ho ka khoneha ho beha boemo ba pele ba ho fetola: nakong ea matla le ha ho se na letšoao la DMX, sesebelisoa se tla tlisa liphello ho maemo a behiloeng karolong ena.
Hape hoa khonahala ho beha mohopolo oa boemo ba ho qetela bo fumanehang nakong ea ho koala (mohlala, haeba ho na le ho hloleha ha matla), ka ho khetha khetho ea "Last Level": tabeng ena, nakong ea ho bulela le ha ho se na motlakase. Letšoao la DMX, sesebelisoa se tla tlisa liphetho ho maemo a bolokiloeng nakong ea mohato oa ho koala.
Bakeng sa lintlha tse ling mabapi le tlhophiso le maemo a likanale tsa tlhahiso, sheba karolo ea "DMX512-RDM Channel Maps" bukeng ena.

DALCNET Srl
36077 Altavilla Vicentina (VI) - Italy
Via Lago di Garda, 22

Mohala +39 0444 1836680
www.dalcnet.com
info@dalcnet.com
Tšen. 08/04/2024 - Leqephe. 18/18

Litokomane / Lisebelisoa

DALC NET LINE-5CV-DMX Voltage Output For Strip LED le LED Module [pdf] Bukana ea Mosebelisi
LINE-5CV-DMX Voltage Output For Strip LED le LED Module, LINE-5CV-DMX, Moqtage Output For Strip LED le LED Module, Strip LED le LED Module, LED Module

Litšupiso

Bukana ea Mosebelisi

DALC NET LINE-5CV-DMX Voltage Output For Strip LED le LED Module

Litaelo tsa Tšebeliso ea Sehlahisoa