DALC NET LINE-5CV-DMX Voltage Output Rau Sawb LED thiab LED Module
Specifications:
- DC Voltage Ntau Yam: 12-24-48 dr hab
- Tso zis Voltage: 12 Vdc, 24 Vdc, 48 Vdc
- Cov khoom siv tam sim no: Max 12A
- Cov zis tam sim no: 5 x max 5A, max 12A Tag nrho
- Nominal zog: 60W, 144W Tag Nrho; 120W, 288W Tag Nrho; 240W, 576W Tag Nrho
- Fais fab poob hauv Standby hom: <0.5 W
- Hom Loads: Resistive thiab DC / DC Converter
- Dimming Curves: Configurable ntawm LIGHTAPP
- Dimming Txoj Kev: Pulse Width Modulation (PWM)
- PWM Frequency: Configurable ntawm LIGHTAPP
- PWM Resolution: 16bit ib
- Cia kub: N/A
- Ua haujlwm Ambient Kub: Tshawb xyuas cov haujlwm ua haujlwm
- Hom Connector: Morsetti Push-In
- Cov kab hluav taws xob: Khoom Loj thiab Stranded Size
- Hlau Sawb Length: N/A
- Qib tiv thaiv IP: N/A
- Casing Material: Plastica 1 npz
- Packing Units: 80 g
- Mechanical Dimensions: 186 x 29 x 21 mm, Ntim Dimensions: 197 x 34 x 29 mm
- Qhov hnyav: 80 g
Cov lus qhia siv khoom
Configuration ntawm Dalcnet LightApp:
LINE-5CV-DMX tuaj yeem teeb tsa siv Dalcnet LightApp mobile thov. Kho cov kev txwv xws li dimming zaus, dimming nkhaus, siab tshaj plaws thiab tsawg kawg nkaus brightness, thiab lwm yam. Lub LightApp muaj rau download tau los ntawm Apple App Store thiab Google Play Store.
Kev teeb tsa:
Xa mus rau daim duab kab hluav taws xob muaj nyob rau hauv phau ntawv qhia rau kev txhim kho kom raug. Xyuas kom tseeb kev sib txuas rau qhov xav tau teeb tsa.
Kev teeb tsa Parameter:
Siv LightApp lossis RDM los teeb tsa qhov tsis xws li PWM Zaus, Kho Kab Ntsig, Lub Hwj Chim Ntawm Qib, thiab DMX Tus Kheej.
Cov lus qhia ua haujlwm:
- Mos On/Off Functionality: Ua kom muaj zog hloov pauv hloov mus ua haujlwm zoo.
- Mos Brightness Dimming: Tso cai rau kev hloov kho qhov kaj.
- Short-Circuit Protection: Tiv thaiv LED tawm los ntawm kev puas tsuaj nyob rau hauv cov ntaub ntawv ntawm ib tug luv luv Circuit Court.
- Opto-Isolated DMX Input: Ua kom muaj kev nyab xeeb thiab txhim khu kev qha DMX teeb liab txais tos.
- Extended Temperature Range: Ua haujlwm nyob rau hauv qhov kub thiab txias rau ntau yam siv.
- Kev Xeem Ua Haujlwm: Ua 100% kev ua haujlwm ua haujlwm ua ntej ua haujlwm tag nrho kom ntseeg tau tias kev ua haujlwm zoo.
FAQ:
Q: Kuv tuaj yeem nrhiav tau phau ntawv qhia tshiab tshaj plaws nyob qhov twg?
A: Rau qhov tseeb phau ntawv version, mus saib www.dalcnet.com lossis luam theej duab QR code ntawm koj lub cuab yeej.
NTA
- DIMMER LED
- Fais fab mov: 12-24-48 Vdc
- Voltage Output rau sawb LED thiab LED module
- Dawb, MONOCOLOR, DYNAMIC WHITE, RGB, RGB + W, RGB + WW thiab RGB + TW Lub Teeb Tswj
- BUS hais kom ua:: DMX512-A + RDM
- Kev teeb tsa ntaus ntawv siv Dalcnet LightApp mobile thov
- Uscite nyob rau hauv tensione costante per carichi R
- PWM modulation 300-4000 Hz
- Cov kev txwv uas tuaj yeem teeb tsa los ntawm APP thiab ntawm RDM:
- PWM Zaus
- Kho qhov nkhaus
- Hwj chim Ntawm Qib
- Tus Cwj Pwm DMX
- Qhia txog lub sijhawm ua haujlwm thiab lub voj voog hluav taws xob
- Short-circuit tiv thaiv ntawm LED outputs
- Opto-Isolated DMX Input
- Yooj yim rau / tawm
- Mos brightness dimming
- Extended kub ntau yam
- 100% Kev xeem ua haujlwm
KHOOM PLIG
LINE-5CV-DMX yog 5-channel tso zis LED dimmer, uas tuaj yeem tswj tau los ntawm DMX BUS tswj.
LED dimmer yog tsim rau kev tsav tsheb thauj khoom xws li StripLEDs thiab LED modules, Dawb, Ib leeg-xim, Dynamic Dawb, RGB, RGB + W, RGB + WW thiab RGB + TW ntawm qhov tsis tu ncuatage. A 12-24-48 Vdc fais fab mov tuaj yeem txuas nrog.
Qhov siab tshaj tawm tam sim no yog 12A. Lub dimmer LED muaj kev tiv thaiv hauv qab no: kev tiv thaiv luv luv ntawm cov khoom siv hluav taws xob LED, kev tiv thaiv hluav taws xob dhau, kev tiv thaiv rov qab polarity, thiab kev tiv thaiv fuse input.
Los ntawm Dalcnet LightApp mobile daim ntawv thov, nws tuaj yeem teeb tsa ntau qhov tsis sib xws ntawm LINE-5CV-DMX xws li dimming zaus, dimming nkhaus, max thiab min brightness theem, thiab lwm yam.
LightApp tuaj yeem rub tawm dawb los ntawm Apple App Store thiab Google Play Store.
⇢ Rau phau ntawv qhia tshiab tshaj plaws, thov mus saib peb webqhov chaw: www.dalcnet.com lossis QR Code ncaj qha rau ntawm koj lub cuab yeej.
PRODUCT CODE
| CODE | POWER SUPPLY | NTUJ LED | N° CHANNEL | BUS COMMANAND | APP CONFIG |
| LINE-5CV-DMX | 12-24-48 VWM | 5 x 5A (max 12A) 1 | 5 | DMX512-RDM | APP: LUB APP |
Kev tiv thaiv
| OVP | Tshaj-voltage kev tiv thaiv 2 | ✔ |
| RVP | Rov qab polarity tiv thaiv2 | ✔ |
| IFP | Kev tiv thaiv nrog input fuse2 | ✔ |
| SCP | Kev tiv thaiv luv luv | ✔ |
REFERENCE STANDARDS
| TS EN 55015 | Cov kev txwv thiab cov kev ntsuas ntawm cov xov tooj cua cuam tshuam cov yam ntxwv ntawm hluav taws xob teeb pom kev zoo thiab cov cuab yeej zoo sib xws |
| TS EN 61547 | Cov khoom siv rau lub hom phiaj teeb pom kev zoo - EMC kev tiv thaiv kev tiv thaiv |
| TS EN 61347-1 | Lamp Controlgear – Part 1: General thiab Safety Requirement |
| TS EN 61347-2-13 | Lamp Controlgear - Ntu 2-13: Tshwj xeeb yuav tsum tau rau dc los yog ac muab hluav taws xob Controlgear rau LED modules |
| ANSI E1.11 | Kev Lom Zem Technology - USITT DMX512-A - Asynchronous Serial Digital Data Transmission Standard for Controlling Lighting Equipment and Accessories |
| ANSI E1.20 | Kev Lom Zem Technology-RDM-Txoj Kev Tswj Cov Cuab Yeej Cuab Yeej dhau USITT DMX512 Networks |
TECHNICAL SPECIFICATIONS
| LINE 5CV DMX | ||||
| DC lub voltage ntau | Min: 10,8Vdc - Max: 52,8Vdc | |||
| Tso zis voltage | =Vin | |||
| Cov khoom siv tam sim no | Max 12A | |||
| Cov zis tam sim no3 | 5 x max 5a | max 12A Totali | ||
|
Nominal zog |
12 Vdc | 60 W | 144 W Tot. | |
| 24 Vdc | 120 W | 288 W TSO | ||
| 48 Vdc | 240 W | 576 W Tot. | ||
| Lub zog poob hauv hom standby | <0,5 W | |||
| Hom kev thauj khoom4 | R | |||
| Dimming nkhaus5 | Linear – Quadratic – Exponential | |||
| Txoj kev dimming | Pulse Width Modulation "PWM" | |||
| PWM Zaus5 | 307-667-1333-2000-4000 Hz | |||
| PWM Resolution | 16bit ib | |||
| Cia Kub | Kub: -40 ° C - Max: 60 ° C | |||
| Ua haujlwm ambient kub, Ta3 | Kub: -10 ° C - Max: 60 ° C | |||
| Hom connector | Morsetti Push-In | |||
| Cov kab hluav taws xob | Khoom Loj | 0,2 ÷ 1,5 mm2 / 24 ÷ 16 AWG | ||
| Stranded Loj | ||||
| Hlau kab ntev | 9 ÷ 10 hli | |||
| IP tiv thaiv qib | IP20 | |||
| Casing Khoom | Plastica | |||
| Ntim units (pieces / units) | 1 XNUMX npz | |||
| Neeg kho tshuab qhov ntev | 186 x 29 x 21 mm | |||
| Ntim qhov ntev | 197 x 34 x 29 mm | |||
| Qhov hnyav | 80 g | |||
QHIA DIAGRAM
Ua raws li cov kauj ruam hauv qab no rau kev teeb tsa khoom raws li qhia hauv daim duab txuas:
- Load kev twb kev txuas: Txuas lub teeb pom kev zoo rau lub davhlau ya nyob twg "L" nrog lub cim "+", es tsis txhob ntawm cov khoom siv hluav taws xob tsis zoo rau lub davhlau ya nyob twg "L1", "L2", "L3", "L4" thiab "L5" nrog lub cim "-" .
- DMX-RDM BUS kev twb kev txuas: Txuas DATA +, DATA- thiab COM teeb liab raws li "DMX" terminals nrog "D +" "D-" "COM" cov cim. Nco ntsoov tsis txhob txuas qhov chaw nyob mus rau "INPUT" terminals.
- Kev sib txuas khoom siv: txuas 12-24-48 Vdc tas li voltage SELV fais fab mov (nyob ntawm seb cov yam ntxwv ntawm LED load) mus rau DC hauv davhlau ya nyob twg nrog cov cim "+" thiab "-".
Xyuas kom tseeb tias koj tsis siv lub hwj huam mov nrog cov zis tam sim no thiab xyuas tias cov polarity ntawm cov cables yog lawm.
CONNECTION DIAGRAM: PERSONALITY DIMMER & MACRO DIMMER mus txog 5 dawb los yog MONOCHROME LoadS
CONNECTION DIAGRAM:
PERSONALITY DIM TO WARM & DYNAMIC Dawb UP TO 2 Loads DIM TO WARM los yog DYNAMIC Dawb
FLICKER kev ua tau zoo
Ua tsaug rau nws 4kHz dimming zaus, LINE-5CV-DMX zoo txo qhov tshwm sim ntawm Flicker tshwm sim. Nyob ntawm ib tus neeg qhov kev xav tau thiab qhov xwm txheej ntawm lawv cov dej num, flickering tuaj yeem cuam tshuam rau ib tus neeg txoj kev noj qab haus huv, txawm tias qhov kev hloov pauv ntawm luminance yog dhau qhov pib pom los ntawm tib neeg lub qhov muag.
Daim duab qhia txog qhov tshwm sim ntawm Flickering hauv kev ua haujlwm ntawm qhov zaus, ntsuas thoob plaws qhov dimming ntau.
Cov txiaj ntsig tau qhia tias thaj chaw muaj kev pheej hmoo tsawg (daj) thiab thaj chaw tsis muaj kev cuam tshuam (ntsuab). Txhais los ntawm IEEE 1789-20156
DIMMING CURVE
DMX + RDM BUS ua haujlwm
Nrog DMX + RDM "SLAVE" BUS MODE, cov khoom siv tau tswj hwm los ntawm kev tswj hwm sab nraud DMX.
CEEB TOOM STANDARDS rau DMX512+ RDM tsheb npav
| ANSI E1.11 | Kev Lom Zem Technology - USITT DMX512-A - Asynchronous Serial Digital Data Transmission Standard for Controlling Lighting Equipment and Accessories |
| ANSI E1.20 | Kev Lom Zem Technology-RDM-Txoj Kev Tswj Cov Cuab Yeej Cuab Yeej dhau USITT DMX512 Networks |
PIN OUT 3 THIAB 5 PIN XLR CONNECTORS
| Siv | 3-PIN XLR Pin # | 5-PIN XLR Pin # | DMX512 muaj nuj nqi |
| Cov Lus Qhia | 1 | 1 | Data Link Common |
| Thawj Cov Ntaub Ntawv Txuas | 2 | 2 | Cov ntaub ntawv 1- |
| 3 | 3 | Cov ntaub ntawv 1+ | |
| Secondary Data Link
(Kev xaiv - saib kab lus 4.8 ntawm ANSI E1.11) |
4 | Cov ntaub ntawv 2- | |
| 5 | Cov ntaub ntawv 2+ |
CHANNELS MAP DMX512-RDM
RDM SETTINGS
DMX Pib Chaw Nyob: Device DMX CHANNEL Setting.
Hauv DMX START ADDRESS teeb tsa, koj tuaj yeem teeb tsa DMX channel ntawm lub cuab yeej.
DMX tus kheej: Device Map Setting
Nyob rau hauv DMX PERSONALITY configuration nws muaj peev xwm xaiv ntau yam maps ntawm LINE 5CV DMX, suav nrog:
- MACRO DIMMER
- DIM kom sov
- TUNABEL dawb
- SMART HSI RGB
- SMART HSI RGBW
- RGB
- RGBW
- MRGB + S
- MRGBW + S
- KHAWV KOOB
- SMART HSI RGBW+TW
DEVICES STATE: DEVICES STATUS Setting
Nyob rau hauv DEVICE STATE cov ntawv qhia zaub mov muaj cov ntaub ntawv ntawm lub sijhawm ua haujlwm thiab lub sijhawm qhib / tawm ntawm lub cuab yeej.
Cov kev txwv no tsuas yog nyeem nkaus xwb thiab tsis tuaj yeem hloov kho.
LAMP MENU: Device POWER-ON STATUS Setting
Hauv LAMP MENU' zaub mov nws tuaj yeem txhais tau "LAMP ON MODE", piv txwv li cov xwm txheej ntawm cov zis thaum lub cuab yeej hloov mus, txawm tias nws yog 100% On lossis Off.
Txoj haujlwm no tsuas yog qhib thaum tsis muaj DMX teeb liab.
MENU DIMMER: DIMMING nkhaus thiab zaus kev teeb tsa ntawm cov khoom siv
Hauv DIMMER MENU koj tuaj yeem xaiv Linear, Quadratic lossis Exponential dimming nkhaus thiab qhov dimming zaus 307, 667, 1333, 2000 lossis 4000 Hz.
RDM COMMANDS
| THOV PARAMETERS | |
| DISC_UNIQUE_BRANCH | ✔ |
| DISC_MUTE | ✔ |
| DISC_UN_MUTE | ✔ |
| SUPPORTED_PARAMETERS | ✔ |
| PARAMETER_DESCRIPTION | ✔ |
| DEVICE_INVO | ✔ |
| DMX_START_ADDRESS | ✔ |
| IDENTIFY_DEVICE | ✔ |
| SUPPORTED PARAMETERS | |
| PRODUCT_DETAIL_ID_LIST | ✔ |
| DEVICE_MODEL_DESCRIPTION | ✔ |
| MANUFACTURER_LABEL | ✔ |
| DEVICE LABEL | ✔ |
| BOOT_SOFWARE_VERSION_ID | ✔ |
| BOOT_SOFWARE_VERSION_LABEL | ✔ |
| DMX_PERSONALITY | ✔ |
| DMX_PERSONALITY_DECRIPTION | ✔ |
| SLOT_INFO | ✔ |
| SLOT_DESCRIPTION | ✔ |
| DEFAULT_SLOT_VALUE | ✔ |
| DEVICE_HOURS | ✔ |
| LAMP_ON_MODE | ✔ |
| DIMMER_INFO | ✔ |
| KHWV | ✔ |
| CURVE_DESCRIPTION | ✔ |
| MODULATION_FREQUENCY | ✔ |
| MODULATION_FREQUENCY_DESCRIPTION | ✔ |
MECHANICAL DIMENSIONS
NCO TSEG KAWM NTAWV
iINSTALLATION
- CEEB TOOM: Cov khoom siv tsuas yog txuas thiab nruab los ntawm tus kws tshaj lij hluav taws xob tsim nyog. Tag nrho cov kev cai, kev cai lij choj, thiab cov cai hauv tsev yuav tsum tau ua raws. Kev teeb tsa tsis raug ntawm cov khoom tuaj yeem ua rau kev puas tsuaj rau cov khoom thiab cov LEDs txuas nrog.
Siv ceev faj thaum txuas LEDs. Polarity thim rov qab ua rau tsis muaj teeb pom kev zoo thiab feem ntau tuaj yeem ua rau cov LEDs puas. - Kev kho yuav tsum tsuas yog ua los ntawm cov neeg ua haujlwm tsim nyog ua raws li cov cai tam sim no.
Cov khoom yog tsim thiab npaj rau kev khiav lag luam LED loads nkaus xwb. Lub hwj chim uas tsis yog-LED loads tuaj yeem thawb cov khoom tawm sab nraud nws cov qauv tsim tshwj xeeb thiab yog, yog li ntawd, tsis muaj kev lav phib xaub.
Kev ua haujlwm ntawm cov khoom yuav tsis dhau qhov tshwj xeeb raws li daim ntawv teev cov khoom. - Cov khoom yuav tsum tau muab tso rau hauv lub switchgear / controlgear txee thiab / los yog junction box tiv thaiv overvoltage.
- Cov khoom yuav tsum tau muab ntsia rau hauv txoj hauj lwm ntsug lossis kab rov tav nrog daim ntawv lo / sab saum toj npog sab saum toj lossis ntsug. Lwm txoj haujlwm tsis raug tso cai. Txoj hauj lwm hauv qab yog tsis tso cai (daim ntawv lo / sab saum toj npog ntsej muag).
- Khaws cais 230Vac (LV) circuits thiab tsis SELV Circuit Court los ntawm kev nyab xeeb ntxiv qis voltage (SELV) Circuit Court thiab los ntawm kev sib txuas nrog cov khoom no. Nws yog txwv tsis pub mus txuas rau txhua qhov laj thawj, ncaj qha lossis tsis ncaj, 230Vac mains voltage rau cov khoom lag luam (terminal block ntawm BUS suav nrog).
- Cov khoom yuav tsum tau dissipated kom raug.
- Kev siv cov khoom nyob rau hauv ib puag ncig hnyav tuaj yeem txwv lub zog tso zis.
- Rau cov khoom sib xyaw ua ke hauv luminaires, ta ambient kub ntau yog cov lus qhia muab rau qhov chaw ua haujlwm zoo tshaj plaws. Txawm li cas los xij, kev sib koom ua ke yuav tsum tau ua kom muaj kev tswj xyuas kom zoo (piv txwv li kev txhim kho ntawm lub cuab yeej, huab cua ntws thiab lwm yam) kom lub tc point kub tsis tshaj qhov tc siab tshaj plaws txwv nyob rau hauv txhua qhov xwm txheej. Txhim khu kev lag luam thiab lub neej tsuas yog lav yog tias qhov siab tshaj plaws tc point kub tsis tshaj nyob rau hauv cov kev mob ntawm kev siv.
POWER SUPPLY
- Tsuas yog siv SELV cov khoom siv hluav taws xob uas muaj qhov txwv tam sim no rau cov khoom siv hluav taws xob, kev tiv thaiv luv luv thiab lub zog yuav tsum tau ua kom raug.
Nyob rau hauv cov ntaub ntawv ntawm cov khoom siv hluav taws xob nruab nrog hauv av terminals, nws yog qhov yuav tsum tau txuas TAG NRHO cov ntsiab lus tiv thaiv hauv av (PE = Protection Earth) mus rau lub ntiaj teb tiv thaiv kom raug thiab muaj ntawv pov thawj. - Kev sib txuas cables ntawm qhov tsawg heev voltage lub hwj chim qhov chaw thiab cov khoom yuav tsum tau ua kom zoo dimension thiab yuav tsum tau insulated los ntawm ib qho kev thaiv los yog ib feem ntawm non-SELV voltage. Siv ob chav insulated cables.
- Dimension lub hwj chim ntawm lub hwj chim mov nyob rau hauv relation mus rau lub load txuas nrog lub ntaus ntawv. Nyob rau hauv cov ntaub ntawv lub hwj chim mov yog oversized piv rau lub siab tshaj plaws absorbed tam sim no, ntxig ib tug tiv thaiv tawm tsam tshaj tam sim no ntawm lub hwj chim mov thiab lub ntaus ntawv.
COMMANDS:
- Qhov ntev ntawm cov cables sib txuas ntawm cov lus txib hauv zos (NO Push khawm lossis lwm yam) thiab cov khoom yuav tsum tsawg dua 10m. Cov kab hluav taws xob yuav tsum raug ntsuas kom zoo thiab yuav tsum tau rwb thaiv tsev los ntawm cov kab hluav taws xob tsis yog SELV lossis voltage. Nws raug nquahu kom siv ob chav insulated cables, yog tias pom tau tias tsim nyog, kuj tiv thaiv.
- Tag nrho cov khoom siv thiab tswj cov teeb liab txuas nrog cov tsheb npav (DMX512 lossis lwm yam) yuav tsum yog hom SELV (cov khoom siv txuas nrog yuav tsum yog SELV lossis txhua qhov teeb meem muab SELV teeb liab).
NTUJ:
- Nws raug pom zoo tias qhov ntev ntawm kev sib txuas cables ntawm cov khoom thiab LED module yog tsawg dua 3m. Cov kab hluav taws xob yuav tsum muaj qhov loj me thiab yuav tsum tau rwb thaiv tsev los ntawm ib qho tsis-SELV thaiv lossis qhov chaw. Nws raug nquahu kom siv ob-insulated cables. Yog tias koj xav siv cov khoom sib txuas ntawm cov khoom siv thiab cov LED module ntev dua 3m, lub installer yuav tsum xyuas kom meej qhov kev ua haujlwm raug ntawm qhov system. Nyob rau hauv txhua rooj plaub, kev sib txuas ntawm cov khoom thiab LED module yuav tsum tsis pub tshaj 30m.
SYMBOLOGIES
 |
Tag nrho cov khoom raug tsim nyob rau hauv kev ua raws li European Cov Lus Qhia, raws li tau tshaj tawm nyob rau hauv EU Conformity Declaration. |
 |
Kev ywj pheej lamp Control: lamp controlgear muaj xws li ib tug los yog ntau tshaj cov ntsiab lus sib cais yog li tsim kom nws yuav tsum tau mounted nyias sab nraum lub luminaire, nrog rau kev tiv thaiv raws li lub cim ntawm lamp controlgear thiab tsis muaj qhov thaiv ntxiv |
 |
“Kev Nyab Xeeb Ntxiv Tsawg Voltage" nyob rau hauv ib lub voj voog uas raug cais tawm los ntawm cov khoom siv hluav taws xob los ntawm kev rwb thaiv tsev tsis pub tsawg tshaj li ntawm lub hauv paus thiab theem nrab circuits ntawm kev nyab xeeb cais transformer raws li IEC 61558-2-6. |
 |
Thaum kawg ntawm nws lub neej muaj txiaj ntsig, cov khoom uas tau piav qhia hauv daim ntawv qhia no yog cais raws li cov khoom siv hluav taws xob pov tseg, thiab tsis tuaj yeem muab pov tseg ua ke nrog cov khoom pov tseg hauv nroog tsis txawv.
Ceeb toom! Kev pov tseg tsis raug ntawm cov khoom no yuav ua rau muaj kev puas tsuaj loj rau ib puag ncig thiab tib neeg kev noj qab haus huv. Thov ceeb toom txog cov txheej txheem pov tseg kom raug rau kev khaws cov khib nyiab thiab ua tiav los ntawm cov tub ceev xwm hauv nroog. |
LIGHTAPP
Pib-UP THIAB FIRST INSTALLATION
Pib SCREEN
Ntawm qhov screen no, lub app tos rau cov cuab yeej tsis tau nyeem.
Txhawm rau nyeem cov kev txwv, tsuas yog nqa rov qab ntawm lub xov tooj smartphone ze rau lub cuab yeej daim ntawv lo. Qhov chaw nyeem-rhiab ntawm lub smartphone yuav txawv nyob ntawm tus qauv.
Thaum qhov kev sib txuas tau tsim, lub vijtsam nrawm yuav tshwm sim. Koj yuav tsum nyob twj ywm nyob rau hauv txoj hauj lwm nrog koj lub smartphone kom txog rau thaum cov tsis tau tag nrho loaded.
iOS no variant: Txhawm rau nyeem cov kev txwv, koj yuav tsum nias lub khawm SCAN nyob rau sab xis saum toj. Lub pop-up yuav tshwm sim qhia thaum twg koj lub smartphone yog npaj txhij los luam theej duab. Txav mus rau lub xov tooj smartphone kom ze rau lub cuab yeej thiab nyob twj ywm hauv qhov chaw kom txog thaum cov kev txwv tsis pub dhau.
SETTINGS THIAB FIRMWARE Loading ScreENS
SETTINGS
Ntawm nplooj ntawv chaw koj tuaj yeem teeb tsa:
- App lus
- Password: Yuav siv tau rau kev sau ntawv.
NKAUJ NTSEEG
Ntawm nplooj ntawv firmware, koj tuaj yeem hloov kho lub firmware ntawm lub cuab yeej.
Qhov thov file yuav tsum yog hom *.bin.
Ib zaug lub file yog uploaded, ua raws li cov lus qhia on-screen.
CEEB TOOM:
- Thaum cov txheej txheem tau pib, nws yog irrevocable thiab nws tsis tuaj yeem ncua nws.
- Nyob rau hauv cov ntaub ntawv ntawm kev cuam tshuam lub firmware yuav corrupted. Hauv qhov no, lub cuab yeej yuav tsum rov ua cov txheej txheem thauj khoom.
- Thaum kawg ntawm kev thauj khoom firmware, tag nrho cov kev teeb tsa yav dhau los yuav rov pib dua rau lub Hoobkas nqi.
Yog tias qhov hloov tshiab tau ua tiav thiab cov khoom thauj khoom sib txawv ntawm qhov dhau los, lub cuab yeej yuav ua rau 10 flashes
LOADING PARAMETERS
TSEEM CEEB: Kev sau cov kev txwv yuav tsum tau ua nrog lub cuab yeej tawm (tsis muaj lub zog nkag).
NYEEM
Nrog lub app hauv READ hom, lub xov tooj smartphone yuav luam theej duab lub cuab yeej thiab qhia nws qhov kev teeb tsa tam sim no ntawm lub vijtsam.
Sau
Nrog lub app nyob rau hauv WRITE hom, lub smartphone yuav sau cov configuration ntawm tsis teem rau ntawm lub vijtsam hauv lub cuab yeej.
Sau tag nrho
Hauv hom qub (Sau Tag Nrho Tawm) lub app tsuas yog sau cov kev txwv uas tau hloov pauv txij li kev nyeem ntawv dhau los. Hauv hom no, kev sau ntawv tsuas yog ua tiav yog tias tus lej xov tooj ntawm lub cuab yeej sib xws li qhov tau nyeem yav dhau los.
Hauv Kev Sau Tag Nrho Hom, tag nrho cov kev ntsuas raug sau. Hauv hom no, kev sau ntawv yuav ua tiav tsuas yog tias tus qauv ntaus ntawv sib phim rau qhov tau nyeem yav dhau los.
Nws raug pom zoo kom qhib qhov Sau Tag Nrho hom nkaus xwb thaum koj xav tau rov ua dua tib lub teeb tsa ntawm ntau lwm yam khoom siv ntawm tib tus qauv.
Sau kev tiv thaiv 
Siv lub padlock khawm, koj tuaj yeem teeb tsa ib qho thaiv thaum sau cov kev txwv. Ib qho screen rau nkag mus rau 4-tus cim lo lus zais yuav tshwm sim. Thaum tus password no tau sau rau hauv lub cuab yeej, tag nrho cov kev hloov pauv txuas ntxiv tuaj yeem ua tau tsuas yog yog tias tus password raug raug sau rau ntawm nplooj ntawv chaw ntawm app.
Txhawm rau tshem tawm lub xauv lo lus zais, tsuas yog nias lub pob khawm thiab tawm hauv qhov chaw Password.
Kev sau ntawv yuam kev
Yog tias, tom qab sau cov kev txwv, thaum koj tig nws rov qab, lub cuab yeej flashes 2 zaug ib pliag tsis tu ncua, nws txhais tau tias kev sau ntawv tsis ua tiav. Yog li, koj yuav tsum ua cov kauj ruam hauv qab no:
- Tua lub cuab yeej.
- Rewrite cov tsis.
- Tos kom tsab ntawv ua tiav lossis tsis muaj cov lus yuam kev tshwm sim.
- Tig lub cuab yeej rov qab.
Yog tias nws tsis ua haujlwm, koj tuaj yeem ua lub Hoobkas pib dua los ntawm kev tig lub cuab yeej sai thiab rau 6 zaug.
PRODUCT INFORMATION
- Khoom npe: Cov neeg siv-settable teb rau kev txheeb xyuas yooj yim. Los ntawm lub neej ntawd, cov khoom npe yog tib yam li cov qauv teb.
- Qauv: Ib thaj teb tsis hloov tau. Qhia tus qauv ntaus ntawv.
- Txog tooj: Daim teb no tsis tuaj yeem kho tau. Uniquely qhia tus qauv.
- Firmware version: teb tsis kho tau. Txheeb xyuas cov firmware version tam sim no thauj khoom ntawm lub cuab yeej.
TXOJ CAI NTAWM CONTROLLO
- PWM zaus: tso cai rau koj los teeb tsa qhov zaus ntawm PWM modulation ntawm cov zis.
- CEEB TOOM: Rau cov ntawv thov hauv cov cua kub hnyav, nws raug nquahu kom txo qis PWM zaus kom tsawg (307 Hz)
- Dimming nkhaus: Kom paub meej, saib Dimming Curves seem ntawm phau ntawv ntaus ntawv
- Tswj hom: Kev xaiv ntawm daim ntawv qhia tswj (saib kab lus tom ntej).
TSEEM CEEB
Nyob rau hauv "Control Type" configuration nws muaj peev xwm xaiv ntau yam duab qhia ntawm LINE-5CV-DMX, suav nrog:
- MACRO DIMMER
- DIM kom sov
- TUNABLE WHITE
- SMART HSI-RGB
- SMART HSI-RGBW
- RGB
- RGBW
- MRGB + S
- MRGBW + S
- KHAWV KOOB
- SMART HSI RGBW+TW
DMX chaw nyob
Rau txhua hom kev tswj, qhov chaw nyob DMX ntawm lub cuab yeej tuaj yeem txhais tau nyob rau hauv qhov ntau (0 ÷ 512).
POWER-ON SETTINGS
- Nyob ntawm seb hom kev tswj tau xaiv ("Smart HSI-RGB" hauv example duab) rau txhua qhov tso zis channel nws tuaj yeem teeb tsa qhov pib hloov-rau-qib: thaum lub zog-up thiab thaum tsis muaj DMX teeb liab, lub cuab yeej yuav coj cov khoom tawm mus rau theem teeb tsa hauv ntu no.
- Nws kuj tseem tuaj yeem teeb tsa lub cim nco txog qib kawg uas muaj nyob rau lub sijhawm kaw (xws li thaum lub zog tsis ua haujlwm), los ntawm kev xaiv qhov "Last Level" kev xaiv: nyob rau hauv rooj plaub no, thaum lub sijhawm hloov pauv thiab qhov tsis muaj. DMX teeb liab, lub cuab yeej yuav coj cov khoom tawm mus rau theem khaws cia thaum lub sijhawm kaw.
- Yog xav paub ntxiv txog kev teeb tsa channel thiab theem, saib "DMX512-RDM Channel Maps" ntu ntawm phau ntawv no.
DALCNET Srl
36077 Altavilla Vicentina (VI) – Ltalis
Ntawm Lago di Garda, 22
Tel. +39 0444 1836680
www.dalcnet.com
yog info@dalcnet.com
Rev. 08/04/2024 – Pag. 18/18 ib
Cov ntaub ntawv / Cov ntaub ntawv
 |
DALC NET LINE-5CV-DMX Voltage Output Rau Sawb LED thiab LED Module [ua pdf] Tus neeg siv phau ntawv LINE-5CV-DMX Voltage Output Rau Sawb LED thiab LED Module, LINE-5CV-DMX, Voltage Output Rau Sawb LED thiab LED Module, Sawb LED thiab LED Module, LED Module |