ZKTECO V5L-IG High Speed Biometric Access Control Terminal
Product Information
Specifications:
- Product Name: SpeedPalm-V5L
- Version: 1.0
- Installation: Indoor use only
- Effective Distance: 0.3 to 2m
- Manufacturer: ZKTeco
Product Usage Instructions
About the Device Installation:
Please follow these recommendations for installation:
- Install indoors only
- Keep an effective distance of 0.3 to 2m
- Avoid installation near glass windows
- Avoid direct sunlight and exposure
- Avoid use of any heat source near the device
Tips for Device Maintenance:
Avoid direct contact with sunlight for a long time. Protect the device from moisture, water, and rain. Handle the device with care. Ensure the device is not installed near the sea or in locations prone to metal oxidation and rust. Protect from lightning. Avoid usage in acidic or alkaline environments for extended periods.
How to Install the Device on the Wall:
- Stick the mounting template to the wall and drill holes according to the template.
- Insert the expansion tubes into the mounting holes.
- Attach the backplate on the wall using wall mounting screws.
- Attach the terminal to the backplate.
- Fasten the terminal to the backplate with a security screw.
FAQs
- Q: Can this device be used outdoors?
A: No, this device is designed for indoor use only. - Q: What is the recommended distance for effective performance?
A: Keep the effective distance between 0.3 to 2 meters for optimal functioning. - Q: How should I handle the device during installation?
A: Handle with care, avoid direct sunlight, and moisture, and maintain a safe distance from heat sources.
About the Device Installation
Please refer to the following recommendations for installation.
- Avoid direct contact to sunlight for a long time.
- Protect the device from moisture, water, and rain.
- Handle the device with care.
- Ensure that the device is not installed near the sea or in other locations where metal oxidation and rust may develop if the device is exposed for an extended period.
- Protect the device from lightning.
- Avoid using the device in acidic or alkaline environments for extended periods.
How to Install
How to Install the Device on the Wall?
- Step 1: Stick the mounting template to the wall and drill holes according to the mounting template.
- Step 2: Insert the expansion tubes into the mounting holes.
- Step 3: Attach the backplate on the wall using the wall mounting screws.
- Step 4: Attach the terminal to the backplate.
- Step 5: Fasten the terminal to the backplate with a security screw.
Download Center
Scan the QR Code to download the User Manual, Installation Guide and Quick Start Guide.
ZKTeco Industrial Park, No. 32, Industrial Road,
Tangxia Town, Dongguan, China.
Phone: +86 769 – 82109991
Fax: +86 755 – 89602394
www.zkteco.com
Copyright © 2024 ZKTECO CO., LTD. All Rights Reserved.
Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the actual product and the written information in this manual.
Documents / Resources
 |
ZKTECO V5L-IG High Speed Biometric Access Control Terminal [pdf] Installation Guide V5L-IG, V5L IG_EN_v1.0, V5L-IG High Speed Biometric Access Control Terminal, V5L-IG, High Speed Biometric Access Control Terminal, Biometric Access Control Terminal, Access Control Terminal, Control Terminal |
