ZKTeco | Biometrics and Computer Vision
Installation Guide for ZKTECO models including: V5L-IG, V5L IG_EN_v1.0, V5L-IG High Speed Biometric Access Control Terminal, V5L-IG, High Speed Biometric Access Control Terminal, Biometric Access Control Terminal, Access Control Terminal, Control Terminal
SpeedPalm-V5L - ZKTeco Indonesia
File Info : application/pdf, 6 Pages, 2.73MB
DocumentDocumentInstallation Guide SpeedPalm-V5L Version: 1.0 Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the actual product and the written information in this manual. About the Device Installation Please refer to the following recommendations for installation. INSTALL INDOORS ONLY KEEP EFFECTIVE DISTANCE OF 0.3 to 2m AVOID INSTALLATION NEAR GLASS WINDOWS AVOID DIRECT SUNLIGHT AND EXPOSURE AVOID USE OF ANY HEAT SOURCE NEAR THE DEVICE Avoid direct contact to sunlight for a long time. Protect the device from moisture, water, and rain. Handle the device with care. Ensure that the device is not installed near the sea or in other locations where metal oxidation and rust may develop if the device is exposed for an extended period. Protect the device from lightning. Avoid using the device in acidic or alkaline environments for extended periods. How to Install the Device on the Wall? Step 1: Stick the mounting template to the wall and drill holes according to the mounting template. 1 2 30mm 90° 6mm 1490mm 1 Step 2: Insert the expansion tubes into the mounting holes. Step 3: Attach the backplate on the wall using the wall mounting screws. wire 2 Step 4: Attach the terminal to the backplate. wire Step 5: Fasten the terminal to the backplate with a security screw. 3 Download Center Scan the QR Code to download the User Manual, Installation Guide and Quick Start Guide. QR Code (Download Center) 4 ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China. Phone : +86 769 - 82109991 Fax : +86 755 - 89602394 www.zkteco.com Copyright © 2024 ZKTECO CO., LTD. All Rights Reserved.