Escrow-Tech ETLTS001 Erogba-Ṣatunṣe iwọn otutu ati Afọwọṣe Olumulo sensọ ọriniinitutu

Turn on Bluetooth on your mobile phone, open the app, and press and hold the sensor for 5 seconds until the WiFi icon displays.
Connect to WiFi, set temperature and humidity values for alarms.

Share devices with family members for monitoring.
Monitor temperature and humidity on the screen in real-time.

Eto

Set upper and lower limits for temperature/humidity.
Adjust temperature and humidity ranges.

Customise temperature/humidity sensitivity.

Afikun Awọn ẹya ara ẹrọ

Iṣakoso ohun: Ṣiṣẹ pẹlu Amazon Alexa ati Google Iranlọwọ.

AKOSO

Jọwọ ka iwe afọwọkọ yii ni pẹkipẹki ṣaaju lilo ati tọju rẹ fun itọkasi ọjọ iwaju.

Ọja paramita

Iwọn: 55 * 55 * 25mm
Iwọn titẹ siitage: DC4.5V LR03 * 3

Ilọyi ti o yara:<30uA
Low agbara undervoltage: <2.7V

Iwọn otutu iṣẹ: -10°C ~55°C
WiFi: 802.11b/g/n 2.4GHz

Ṣiṣẹ ọriniinitutu: 10% 90% RH
Awoṣe ọja: ETLTS001

Agbara ẹrọ

Please open the back cover of the product before use, and remove the battery insulation sheet to power the device.

Bawo ni lati ṣeto

First, scan the QR code with your smartphone, or search the Carbon-Adjust app in the Google Play Store or APP Store to download and install the app.
Register the app with an email address.
- Ipo Bluetooth: First, turn on Bluetooth on your mobile phone.
- Open the Carbon-Adjust app and choose “+”. I press and hold the sensor for 5 seconds, I the WiFi icon will indicate on the sensor display.
- After this, you will see devices to be added to your mobile app.
- Finally, press “Go” to add. It will connect to the Wi-Fi network automatically.**
After connecting to WiFi successfully, click the sensor icon to enter the app interface and make some settings.
- You can preset the value of temperature and humidity for alarming effects from here.
- Ifamọ iwọn otutu/ọrinrin:
- Sensor temperature/humidity value will synchronise to the app when the upper/lower preset temperature/humidity values. For example, if the temperature is 28°˜ and humidity is 70%, the temperature/ humidity sensitivity is ±0.6/6%, then the sensor temperature/humidity value will synchronise to the app when the temperature/humidity is 28.6°˜ or 27.4°˜ /76% or 64%. (Factory default: temperature sensitivity is 0.6°˜, humidity sensitivity is 6%)
- Awọn ibeere isamisi
- Ẹrọ yii ni ibamu pẹlu apakan 15 ti Awọn ofin FCC. Iṣiṣẹ jẹ koko-ọrọ si awọn ipo meji wọnyi:
  - Ẹrọ yii le ma fa kikọlu ipalara,
  - Ẹrọ yii gbọdọ gba kikọlu eyikeyi ti o gba, pẹlu kikọlu ti o le fa isẹ ti ko fẹ.
- Alaye si olumulo
- Eyikeyi awọn iyipada tabi awọn iyipada ti ko fọwọsi ni pato nipasẹ ẹgbẹ ti o ni iduro fun ibamu le sọ aṣẹ olumulo di ofo lati ṣiṣẹ ohun elo naa.
- Temperature/humidity report cycle: Time setting of sensor temperature and humidity value synchronisation to the app (factory default is 120 minutes).
- Temperature/humidity upper and lower limits are set:
- The Setting of the temperature/humidity range.
- Alaye si olumulo
- Akiyesi: Ohun elo yii ti ni idanwo ati rii lati ni ibamu pẹlu awọn opin fun ẹrọ oni nọmba Kilasi B, labẹ apakan 15 ti Awọn ofin FCC. Awọn opin wọnyi jẹ apẹrẹ lati pese aabo to tọ si kikọlu ipalara ni fifi sori ibugbe kan. Ẹrọ yii n ṣe ipilẹṣẹ awọn lilo ati pe o le tan agbara ipo igbohunsafẹfẹ redio ati, ti ko ba fi sii ati lo labẹ awọn ilana, o le fa kikọlu ipalara si awọn ibaraẹnisọrọ redio. Sibẹsibẹ, ko si iṣeduro pe kikọlu ko ni waye ni fifi sori ẹrọ kan pato. Ti ohun elo yii ba fa kikọlu ipalara si redio tabi gbigba tẹlifisiọnu, eyiti o le pinnu nipasẹ titan ohun elo naa ni pipa ati tan, a gba olumulo niyanju lati gbiyanju lati ṣatunṣe kikọlu naa nipasẹ ọkan tabi diẹ ẹ sii ti awọn iwọn wọnyi:
- Reorient tabi tun eriali gbigba pada.
- Mu iyatọ pọ si laarin ẹrọ ati olugba.
- So ẹrọ pọ si ohun iṣan lori kan Circuit yatọ si lati eyi ti awọn olugba ti a ti sopọ.
- Kan si alagbawo oniṣowo tabi redio ti o ni iriri / onimọ-ẹrọ TV fun iranlọwọ.

Intelligent Linkage: Nigbati ayika ibaramu ba yipada, o le ṣe ọna asopọ oye. Fun example, the air conditioner will be on automatically when the room temperature surpasses 35°˜.
- The humidifier will spray when the humidity is lower than 20% RH.
- Ikilọ RF fun Ẹrọ Alagbeka:
- Ohun elo yii ni ibamu pẹlu awọn opin ifihan itankalẹ FCC ti a ṣeto fun agbegbe ti a ko ṣakoso. Ohun elo yii yẹ ki o fi sori ẹrọ ati ṣiṣẹ pẹlu aaye to kere ju 20cm laarin imooru & ara rẹ.
Pin awọn ẹrọ: O le pin awọn ẹrọ ti o ṣafikun rẹ pẹlu awọn ọmọ ẹgbẹ ẹbi rẹ, nitorinaa wọn tun le ṣe atẹle agbegbe ibaramu.
Screen on Sensor: You can in real-time, monitor the temperature and humidity on the screen directly.

Temperature Unit Selection in App: You can choose °˜ or °° as the temperature unit through the app.
Ẹnikẹta Iṣakoso ohun: Ṣiṣẹ pẹlu Amazon Alexa ati Google Iranlọwọ.

Carbon-Adjust

Ṣabẹwo si wa website for updated Terms and Conditions
Made in China for Escrow-Tech Limited, Castlemead, Lower Castle Street, Bristol, BS1 3AG

Awọn ibeere Nigbagbogbo

Q: How do I connect the sensor to WiFi?
- A: Follow the setup instructions provided in the manual to connect the sensor to WiFi. Make sure to download the Carbon-Adjust app and register the device.
Q: Can I share the device with family members?
- A: Yes, you can share added devices with family members so they can also monitor the ambient environment through the app.

Awọn iwe aṣẹ / Awọn orisun

Escrow-Tech ETLTS001 Carbon-Adjust Temperature and Humidity Sensor [pdf] Afowoyi olumulo
ETLTS001, ETLTS001 Carbon-Adjust Temperature and Humidity Sensor, Carbon-Adjust Temperature and Humidity Sensor, Adjust Temperature and Humidity Sensor, Temperature and Humidity Sensor, Humidity Sensor

Awọn itọkasi

Itọsọna olumulo

Escrow-Tech ETLTS001 Carbon-Adjust Temperature and Humidity Sensor

ọja Alaye

Awọn ilana Lilo ọja