Escrow-Tech ETLTS001 Carbon-Adjust Temperature and Humidity Sensor

Enfòmasyon sou pwodwi

Espesifikasyon

• Non pwodwi: Wi-Fi Temperature & Humidity Sensor With Backlight
• Modèl: Version 25/ETLTS001/1
• Sous pouvwa: Batri
• Koneksyon: Wi-Fi, Bluetooth
• Konpatibilite: Works with Carbon-Adjust app, Amazon Alexa, Google Assistant

Enstriksyon Itilizasyon Pwodwi

Aparèy pouvwa

Please open the back cover of the product before use, and remove the battery insulation sheet to power the device.

Enstriksyon Enstalasyon

1. Scan the QR code or download the Carbon-Adjust app from the Google Play Store or APP Store.
2. Turn on Bluetooth on your mobile phone, open the app, and press and hold the sensor for 5 seconds until the WiFi icon displays.
3. Connect to WiFi, set temperature and humidity values for alarms.
4. Share devices with family members for monitoring.
5. Monitor temperature and humidity on the screen in real-time.
6. Register the app with an email address and add the device to the Wi-Fi network.

Anviwònman

• Set upper and lower limits for temperature/humidity.
• Adjust temperature and humidity ranges.
• Customise temperature/humidity sensitivity.

Karakteristik adisyonèl

• Kontwòl vwa: Travay ak Amazon Alexa ak Google Assistant.

ENTWODIKSYON

Tanpri li manyèl sa a ak anpil atansyon anvan ou itilize epi kenbe li pou referans nan lavni.

Paramèt pwodwi

• Gwosè: 55 * 55 * 25mm
• Antre voltage: DC4.5V LR03 * 3
• Kouran trankil:<30uA
• Ba pouvwa undervoltage: <2.7V
• Tanperati travay: -10 ° C ~ 55 ° C
• WiFi: 802.11b/g/n 2.4GHz
• Travay imidite: 10% 90% RH
• Modèl pwodwi: ETLTS001

Aparèy pouvwa

Please open the back cover of the product before use, and remove the battery insulation sheet to power the device.

Ki jan yo mete kanpe

1. First, scan the QR code with your smartphone, or search the Carbon-Adjust app in the Google Play Store or APP Store to download and install the app.
2. Register the app with an email address.
   • Bluetooth mòd: First, turn on Bluetooth on your mobile phone.
   • Open the Carbon-Adjust app and choose “+”. I press and hold the sensor for 5 seconds, I the WiFi icon will indicate on the sensor display.
   • After this, you will see devices to be added to your mobile app.
   • Finally, press “Go” to add. It will connect to the Wi-Fi network automatically.**
3. After connecting to WiFi successfully, click the sensor icon to enter the app interface and make some settings.
   • You can preset the value of temperature and humidity for alarming effects from here.
   • Tanperati/imidite sansiblite:
   • Sensor temperature/humidity value will synchronise to the app when the upper/lower preset temperature/humidity values. For example, if the temperature is 28°˜ and humidity is 70%, the temperature/ humidity sensitivity is ±0.6/6%, then the sensor temperature/humidity value will synchronise to the app when the temperature/humidity is 28.6°˜ or 27.4°˜ /76% or 64%. (Factory default: temperature sensitivity is 0.6°˜, humidity sensitivity is 6%)
   • Kondisyon pou etikèt
   • Aparèy sa a konfòm ak pati 15 Règ FCC yo. Operasyon an sijè a de kondisyon sa yo:
     • Aparèy sa a pa ka lakòz entèferans danjere,
     • Aparèy sa a dwe aksepte nenpòt entèferans resevwa, enkli entèferans ki ka lakòz operasyon endezirab.
   • Enfòmasyon pou itilizatè a
   • Nenpòt Chanjman oswa modifikasyon pati ki responsab pou konfòmite pa apwouve ekspreseman kapab anile otorite itilizatè a pou opere ekipman an.
   • Temperature/humidity report cycle: Time setting of sensor temperature and humidity value synchronisation to the app (factory default is 120 minutes).
   • Temperature/humidity upper and lower limits are set:
   • The Setting of the temperature/humidity range.
   • Enfòmasyon pou itilizatè a
   • Nòt: Yo te teste ekipman sa a epi yo jwenn li konfòme yo ak limit pou yon aparèy dijital Klas B, dapre pati 15 Règ FCC yo. Limit sa yo fèt pou bay pwoteksyon rezonab kont entèferans danjere nan yon enstalasyon rezidansyèl. Ekipman sa a jenere itilizasyon epi yo ka gaye enèji frekans radyo epi, si li pa enstale ak itilize dapre enstriksyon yo, ka lakòz entèferans danjere nan kominikasyon radyo. Sepandan, pa gen okenn garanti ke entèferans pa pral rive nan yon enstalasyon an patikilye. Si ekipman sa a lakòz entèferans danjere nan resepsyon radyo oswa televizyon, sa ki ka detèmine pa fèmen ekipman an ak sou, itilizatè a ankouraje pou eseye korije entèferans lan pa youn oswa plis nan mezi sa yo:
   • Reoryantasyon oswa deplase antèn k ap resevwa a.
   • Ogmante separasyon ki genyen ant ekipman ak reseptè a.
   • Konekte ekipman an nan yon priz sou yon sikwi diferan de sa a ki reseptè a konekte.
   • Konsilte konsesyonè a oswa yon teknisyen radyo/televizyon ki gen eksperyans pou èd.
4. Koneksyon Entelijan: Lè anviwònman anviwònman an chanje, ou ka fè lyezon entèlijan. Pou egzanpample, the air conditioner will be on automatically when the room temperature surpasses 35°˜.
   • The humidifier will spray when the humidity is lower than 20% RH.
   • Avètisman RF pou aparèy mobil:
   • Ekipman sa a konfòme ak limit ekspoze FCC ki tabli pou yon anviwònman san kontwòl. Ekipman sa a ta dwe enstale ak opere ak distans minimòm 20cm ant radyatè a ak kò ou.
5. Pataje aparèy: Ou ka pataje aparèy ki ajoute ou yo ak manm fanmi ou, pou yo ka kontwole anviwònman an tou.
6. Screen on Sensor: You can in real-time, monitor the temperature and humidity on the screen directly.
7. Temperature Unit Selection in App: You can choose °˜ or °° as the temperature unit through the app.
8. Twazyèm pati Kontwòl vwa: Travay ak Amazon Alexa ak Google Assistant.

Carbon-Adjust

• Vizite nou website for updated Terms and Conditions
• Made in China for Escrow-Tech Limited, Castlemead, Lower Castle Street, Bristol, BS1 3AG

Kesyon yo poze souvan

• Q: How do I connect the sensor to WiFi?
  • A: Follow the setup instructions provided in the manual to connect the sensor to WiFi. Make sure to download the Carbon-Adjust app and register the device.
• Q: Can I share the device with family members?
  • A: Yes, you can share added devices with family members so they can also monitor the ambient environment through the app.

Dokiman / Resous

Escrow-Tech ETLTS001 Carbon-Adjust Temperature and Humidity Sensor [pdfManyèl Itilizatè ETLTS001, ETLTS001 Carbon-Adjust Temperature and Humidity Sensor, Carbon-Adjust Temperature and Humidity Sensor, Adjust Temperature and Humidity Sensor, Temperature and Humidity Sensor, Humidity Sensor

Referans

• Manyèl itilizatè