Escrow-Tech ETLTS001 Carbon-Rekebisha Joto na Unyevu Kihisi

Taarifa ya Bidhaa

Vipimo

• Jina la Bidhaa: Kitambuzi cha Halijoto na Unyevu cha Wi-Fi chenye Mwangaza wa Nyuma
• Mfano: Toleo la 25/ETLTS001/1
• Chanzo cha Nguvu: Betri
• Muunganisho: Wi-Fi, Bluetooth
• Utangamano: Works with Carbon-Adjust app, Amazon Alexa, Google Assistant

Maagizo ya Matumizi ya Bidhaa

Nguvu ya Kifaa

Tafadhali fungua kifuniko cha nyuma cha bidhaa kabla ya kutumia, na uondoe karatasi ya kuhami betri ili kuwasha kifaa.

Maagizo ya Kuweka

1. Scan the QR code or download the Carbon-Adjust app from the Google Play Store or APP Store.
2. Turn on Bluetooth on your mobile phone, open the app, and press and hold the sensor for 5 seconds until the WiFi icon displays.
3. Connect to WiFi, set temperature and humidity values for alarms.
4. Shiriki vifaa na wanafamilia kwa ufuatiliaji.
5. Monitor temperature and humidity on the screen in real-time.
6. Register the app with an email address and add the device to the Wi-Fi network.

Mipangilio

• Weka viwango vya juu na vya chini vya halijoto/unyevu.
• Kurekebisha viwango vya joto na unyevu.
• Customise temperature/humidity sensitivity.

Vipengele vya Ziada

• Udhibiti wa Sauti: Inafanya kazi na Amazon Alexa na Msaidizi wa Google.

UTANGULIZI

Tafadhali soma mwongozo huu kwa makini kabla ya kuutumia na uuhifadhi kwa marejeleo ya baadaye.

Vigezo vya Bidhaa

• Ukubwa: 55*55*25mm
• Ingizo voltage: DC4.5V LR03*3
• Mkondo wa utulivu:<30uA
• Nguvu ya chini ya nguvutage: <2.7V
• Halijoto ya kufanya kazi: -10°C~55°C
• WiFi: 802.11b/g/n 2.4GHz
• Kufanya kazi unyevunyevu: 10%90% RH
• Muundo wa bidhaa: ETLTS001

Nguvu ya Kifaa

Tafadhali fungua kifuniko cha nyuma cha bidhaa kabla ya kutumia, na uondoe karatasi ya kuhami betri ili kuwasha kifaa.

Jinsi ya kusanidi

1. First, scan the QR code with your smartphone, or search the Carbon-Adjust app in the Google Play Store or APP Store to download and install the app.
2. Register the app with an email address.
   • Hali ya Bluetooth: First, turn on Bluetooth on your mobile phone.
   • Open the Carbon-Adjust app and choose “+”. I press and hold the sensor for 5 seconds, I the WiFi icon will indicate on the sensor display.
   • After this, you will see devices to be added to your mobile app.
   • Hatimaye, bonyeza "Nenda" ili kuongeza. Itaunganishwa kwa mtandao wa Wi-Fi kiotomatiki.**
3. After connecting to WiFi successfully, click the sensor icon to enter the app interface and make some settings.
   • You can preset the value of temperature and humidity for alarming effects from here.
   • Unyeti wa halijoto/unyevu:
   • Sensor temperature/humidity value will synchronise to the app when the upper/lower preset temperature/humidity values. For example, if the temperature is 28°˜ and humidity is 70%, the temperature/ humidity sensitivity is ±0.6/6%, then the sensor temperature/humidity value will synchronise to the app when the temperature/humidity is 28.6°˜ or 27.4°˜ /76% or 64%. (Factory default: temperature sensitivity is 0.6°˜, humidity sensitivity is 6%)
   • Mahitaji ya kuweka lebo
   • Kifaa hiki kinatii sehemu ya 15 ya Sheria za FCC. Operesheni inategemea masharti mawili yafuatayo:
     • Kifaa hiki hakiwezi kusababisha mwingiliano hatari,
     • Kifaa hiki lazima kikubali uingiliaji wowote uliopokewa, ikiwa ni pamoja na uingiliaji ambao unaweza kusababisha uendeshaji usiohitajika.
   • Taarifa kwa mtumiaji
   • Mabadiliko yoyote au marekebisho ambayo hayajaidhinishwa waziwazi na mhusika anayehusika na utiifu yanaweza kubatilisha mamlaka ya mtumiaji kuendesha kifaa.
   • Temperature/humidity report cycle: Time setting of sensor temperature and humidity value synchronisation to the app (factory default is 120 minutes).
   • Viwango vya joto/unyevu juu na chini vimewekwa:
   • The Setting of the temperature/humidity range.
   • Taarifa kwa mtumiaji
   • Kumbuka: Kifaa hiki kimejaribiwa na kupatikana kuwa kinatii vikomo vya kifaa cha kidijitali cha Hatari B, chini ya sehemu ya 15 ya Sheria za FCC. Vikomo hivi vimeundwa ili kutoa ulinzi unaofaa dhidi ya kuingiliwa kwa hatari katika usakinishaji wa makazi. Kifaa hiki huzalisha matumizi na kinaweza kuangazia nishati ya masafa ya redio na, ikiwa hakijasakinishwa na kutumiwa chini ya maagizo, kinaweza kusababisha mwingiliano unaodhuru kwa mawasiliano ya redio. Hata hivyo, hakuna uhakika kwamba kuingiliwa haitatokea katika ufungaji fulani. Ikiwa kifaa hiki kitasababisha usumbufu unaodhuru kwa upokeaji wa redio au televisheni, ambao unaweza kubainishwa kwa kuzima na kuwasha kifaa, mtumiaji anahimizwa kujaribu kusahihisha uingiliaji huo kwa moja au zaidi ya hatua zifuatazo:
   • Elekeza upya au uhamishe tena antena inayopokea.
   • Kuongeza utengano kati ya kifaa na mpokeaji.
   • Unganisha vifaa kwenye duka kwenye mzunguko tofauti na ile ambayo mpokeaji ameunganishwa.
   • Wasiliana na muuzaji au mtaalamu wa redio/TV kwa usaidizi.
4. Intelligent Linkage: Wakati mazingira ya mazingira yanabadilika, unaweza kufanya uhusiano wa akili. Kwa mfanoample, the air conditioner will be on automatically when the room temperature surpasses 35°˜.
   • The humidifier will spray when the humidity is lower than 20% RH.
   • Onyo la RF kwa kifaa cha rununu:
   • Kifaa hiki kinatii vikomo vya mfiduo wa mionzi ya FCC vilivyowekwa kwa mazingira yasiyodhibitiwa. Kifaa hiki kinapaswa kusanikishwa na kuendeshwa kwa umbali wa angalau 20cm kati ya radiator na mwili wako.
5. Shiriki vifaa: Unaweza kushiriki vifaa ulivyoongeza na wanafamilia yako, ili waweze pia kufuatilia mazingira tulivu.
6. Screen on Sensor: You can in real-time, monitor the temperature and humidity on the screen directly.
7. Temperature Unit Selection in App: You can choose °˜ or °° as the temperature unit through the app.
8. Mtu wa tatu Udhibiti wa Sauti: Inafanya kazi na Amazon Alexa na Msaidizi wa Google.

Carbon-Rekebisha

• Tembelea yetu webtovuti kwa Sheria na Masharti yaliyosasishwa
• Made in China for Escrow-Tech Limited, Castlemead, Lower Castle Street, Bristol, BS1 3AG

Maswali Yanayoulizwa Mara Kwa Mara

• Swali: Je, ninawezaje kuunganisha sensor kwenye WiFi?
  • A: Follow the setup instructions provided in the manual to connect the sensor to WiFi. Make sure to download the Carbon-Adjust app and register the device.
• Swali: Je, ninaweza kushiriki kifaa na wanafamilia?
  • A: Yes, you can share added devices with family members so they can also monitor the ambient environment through the app.

Nyaraka / Rasilimali

Escrow-Tech ETLTS001 Carbon-Rekebisha Joto na Unyevu Kihisi [pdf] Mwongozo wa Mtumiaji ETLTS001, ETLTS001 Sensor ya Kurekebisha Halijoto na Unyevu wa Carbon, Kihisi cha Kaboni-Rekebisha Halijoto na Unyevu, Rekebisha Kihisi cha Halijoto na Unyevu, Kitambua Halijoto na Unyevu, Kitambua Unyevu

Marejeleo

• Mwongozo wa Mtumiaji