Beijer Electronics GT-1238 Digital Input Module
Aṣẹ-lori-ara © 2025 Beijer Electronics AB. Gbogbo awọn ẹtọ wa ni ipamọ. Alaye ti o wa ninu iwe yii jẹ koko ọrọ si iyipada laisi akiyesi ati pe a pese bi o ṣe wa ni akoko titẹ sita. Beijer Electronics AB ni ẹtọ lati yi alaye eyikeyi pada laisi imudojuiwọn atẹjade yii. Beijer Electronics AB ko gba ojuse fun eyikeyi awọn aṣiṣe ti o le han ninu iwe yii. Gbogbo examples in this document are only intended to improve understanding of the functionality and handling of the equipment. Beijer Electronics AB cannot assume any liability if these examples ti wa ni lilo ni gidi ohun elo. Ninu view ti awọn jakejado ibiti o ti ohun elo fun yi software, awọn olumulo gbọdọ gba to imo ara wọn ni ibere lati rii daju wipe o ti wa ni ti tọ lo ni wọn pato ohun elo. Awọn eniyan ti o ni iduro fun ohun elo ati ohun elo gbọdọ funrararẹ rii daju pe ohun elo kọọkan wa ni ibamu pẹlu gbogbo awọn ibeere, awọn iṣedede, ati ofin ni ọwọ si iṣeto ati ailewu. Beijer Electronics AB kii yoo gba gbese fun eyikeyi ibajẹ ti o ṣẹlẹ lakoko fifi sori ẹrọ tabi lilo ohun elo ti a mẹnuba ninu iwe yii. Beijer Electronics AB ni idinamọ gbogbo iyipada, iyipada, tabi iyipada ẹrọ.
Ile Olori Ise patapata
- Beijer Electronics AB
- Apoti 426
- 201 24 Malmö, Sweden
- www.beijerelectronics.com
- +46 40 358600
Nipa Itọsọna yii
This manual contains information on the software and hardware features of the Beijer Electronics GT-1238 Digital Input Module. It provides in-depth specifications, guidance on installation, setup, and usage of the product.
Awọn aami Lo ninu Itọsọna yii
This publication includes Warnings, Cautions, Notes, and important icons where appropriate to point out safety-related or other important information. The corresponding symbols should be interpreted asfollows:
IKILO
Aami Ikilọ tọkasi ipo ti o lewu eyiti, ti ko ba yago fun, o le ja si iku tabi ipalara nla, ati ibajẹ nla si ọja naa.
Ṣọra
Aami Išọra tọkasi ipo ti o lewu eyiti, ti ko ba yago fun, o le ja si ipalara kekere tabi dede, ati ibajẹ iwọntunwọnsi si ọja naa.
AKIYESI
Aami Akọsilẹ naa ṣe itaniji oluka si awọn otitọ ati awọn ipo ti o yẹ.
PATAKI
Aami pataki ṣe afihan alaye pataki.
Aabo
Ṣaaju lilo ọja yii, jọwọ ka iwe afọwọkọ yii ati awọn iwe afọwọkọ miiran ti o yẹ ni pẹkipẹki. San ifojusi ni kikun si awọn itọnisọna ailewu! Ni iṣẹlẹ ti Beijer Electronics yoo ṣe iduro tabi ṣe oniduro fun awọn bibajẹ ti o waye lati lilo ọja yii. Awọn aworan, examples ati awọn aworan atọka ninu iwe afọwọkọ yii wa fun awọn idi ijuwe. Nitori ọpọlọpọ awọn oniyipada ati awọn ibeere ti o ni nkan ṣe pẹlu fifi sori eyikeyi pato, Beijer Electronics ko le gba ojuse tabi layabiliti fun lilo gangan ti o da lori iṣaaju.amples ati awọn aworan atọka.
Awọn iwe-ẹri ọja
Ọja naa ni awọn iwe-ẹri ọja atẹle.
Gbogbogbo Awọn ibeere Abo
IKILO
- Maṣe ṣajọ awọn ọja ati awọn okun onirin pẹlu agbara ti a ti sopọ si eto naa. Ṣiṣe bẹ fa “filaṣi arc” kan, eyiti o le ja si awọn iṣẹlẹ eewu airotẹlẹ (ina, ina, awọn ohun ti n fo, titẹ bugbamu, bugbamu ohun, ooru).
- Maṣe fi ọwọ kan awọn bulọọki ebute tabi awọn modulu IO nigbati eto n ṣiṣẹ. Ṣiṣe bẹ le fa ina mọnamọna, Circuit kukuru tabi aiṣedeede ẹrọ naa.
- Maṣe jẹ ki awọn nkan ti fadaka ita kan kan ọja naa nigbati eto ba nṣiṣẹ. Ṣiṣe bẹ le fa ina mọnamọna, Circuit kukuru tabi aiṣedeede ẹrọ naa.
- Ma ṣe gbe ọja naa si nitosi ohun elo ti o ni ina. Ṣiṣe bẹ le fa ina.
- Gbogbo iṣẹ onirin yẹ ki o ṣe nipasẹ ẹlẹrọ itanna.
- Nigbati o ba n mu awọn modulu, rii daju pe gbogbo eniyan, ibi iṣẹ ati iṣakojọpọ ti wa ni ipilẹ daradara. Yago fun fọwọkan awọn paati adaṣe, awọn modulu ni awọn paati itanna ti o le parun nipasẹ itusilẹ itanna.
Ṣọra
- Maṣe lo ọja naa ni awọn agbegbe pẹlu iwọn otutu ti o ju 60 ℃. Yago fun gbigbe ọja naa sinu ina taara.
- Maṣe lo ọja naa ni awọn agbegbe ti o ju 90% ọriniinitutu lọ.
- Nigbagbogbo lo ọja ni awọn agbegbe pẹlu iwọn idoti 1 tabi 2.
- Lo boṣewa kebulu fun onirin.
Nipa G-jara System
Eto ti pariview
- Module Adapter Nẹtiwọọki - module ohun ti nmu badọgba nẹtiwọọki n ṣe ọna asopọ laarin ọkọ akero aaye ati awọn ẹrọ aaye pẹlu awọn modulu imugboroja. Isopọ si oriṣiriṣi awọn ọna ọkọ akero aaye le jẹ idasilẹ nipasẹ ọkọọkan module ohun ti nmu badọgba nẹtiwọọki ti o baamu, fun apẹẹrẹ, fun MODBUS TCP, Ethernet IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Serial etc.
- Module Imugboroosi - Awọn iru module Imugboroosi: Digital IO, Analog IO, ati Awọn modulu Pataki.
- Messaging – The system uses two types of messaging: Service messaging and IO messaging. About the G-series System Beijer
IO Ilana Data maapu
Module imugboroja ni awọn iru data mẹta: data IO, paramita atunto, ati iforukọsilẹ iranti. Paṣipaarọ data laarin ohun ti nmu badọgba nẹtiwọọki ati awọn modulu imugboroja ni a ṣe nipasẹ data aworan ilana IO nipasẹ ilana inu.
Data flow between the network adapter (63 slots) and expansion modules The input and output image data depend on the slot position and the data type of the expansion slot. The ordering of input and output process image data is based on the expansion slot position. Calculations for this arrangement are included in the manuals for the network adapter and programmable IO modules. Valid parameter data depends on the modules in use. For example, analogue modules have settings of either 0-20 mA or 4-20 mA, and temperature modules have settings such as PT100, PT200, and PT500. The documentation for each module provides a description of the parameter data.
Awọn pato
Awọn pato Ayika
- Awọn iwọn otutu ti nṣiṣẹ -20 ° C - 60 ° C
- UL temperature -20°C – 60°C
- Ibi ipamọ otutu -40°C – 85°C
- Relative humidity 5% – 90% non-condensing
- Iṣagbesori DIN iṣinipopada
- Shock operating IEC 60068-2-27 (15G)
- Vibration resistance IEC 60068-2-6 (4 g)
- Industrial emissions EN 61000-6-4: 2019
- Industrial immunity EN 61000-6-2: 2019
- Installation position Vertical and horizontal
- Product certifications CE, FCC, UL, cUL
Gbogbogbo Awọn alaye
- Power dissipation Max. 35 mA @ 5 VDC
- Isolation I/O to logic: Photocoupler isolation
- Field power Supply voltage: 24 VDC ipin
- Voltage ibiti: 15 - 30 VDC
- Ipilẹ agbara: 0 mA @ 24 VDC
- Wiring I/O cable max. 2.0 mm² (AWG 14)
- Torque 0.8 Nm (7 lb-in)
- Iwọn 59 g
- Module size 12 mm x 99 mm x 70 mm
Awọn iwọn
Awọn pato igbewọle
| Awọn igbewọle fun module | 8 points universal type |
| Awọn itọkasi | 8 alawọ ewe input ipo |
| Lori-ipinle voltage | 24 VDC ipin
15 – 26.4 VDC @ 70 ℃ 15 – 28.8 VDC @ 60 ℃ |
| On-ipinle lọwọlọwọ | 4 mA @ 24 VDC
5 mA @ 30 VDC |
| Pa-ipinle voltage | 12.5 VDC @ 25 ℃ |
| Idaduro ifihan agbara igbewọle | PA si ON: Max. 0.3 ms
TAN lati PA: Max. 0.3 ms |
| Ajọ igbewọle | Adijositabulu, to 10 ms |
| Ikokoro igbewọle ipin | 5.4K Ω aṣoju |
| Iru wọpọ | 8 ojuami / 2 COM (gbogbo) |
Aworan onirin
| Pin ko si. | Apejuwe ifihan agbara |
| 0 | Ikanni igbewọle 0 |
| 1 | Ikanni igbewọle 1 |
| 2 | Ikanni igbewọle 2 |
| 3 | Ikanni igbewọle 3 |
| 4 | Ikanni igbewọle 4 |
| 5 | Ikanni igbewọle 5 |
| 6 | Ikanni igbewọle 6 |
| 7 | Ikanni igbewọle 7 |
| 8 | Wọpọ (operation sink. 0 V/Ope orisun. 24V) |
| 9 | Wọpọ (operation sink. 0 V/Ope orisun. 24V) |
LED Atọka
| LED No. | LED iṣẹ / apejuwe | LED awọ |
| 0 | INPUT ikanni 0 | Alawọ ewe |
| 1 | INPUT ikanni 1 | Alawọ ewe |
| 2 | INPUT ikanni 2 | Alawọ ewe |
| 3 | INPUT ikanni 3 | Alawọ ewe |
| 4 | INPUT ikanni 4 | Alawọ ewe |
| 5 | INPUT ikanni 5 | Alawọ ewe |
| 6 | INPUT ikanni 6 | Alawọ ewe |
| 7 | INPUT ikanni 7 | Alawọ ewe |
LED ikanni Ipo
| Ipo | LED | Itọkasi |
| Ko si ifihan agbara | Paa | Iṣiṣẹ deede |
| Lori ifihan agbara | Alawọ ewe | Iṣiṣẹ deede |
Data iyaworan Sinu Aworan Tabili
Input module data
| D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
Iye aworan titẹ sii
| Bit rara. | Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
| Baiti 0 | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
Paramita Data
Wulo paramita ipari: 2 baiti
| Bit rara. | Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
| Baiti 0 | Iye àlẹmọ igbewọle: 0 – 10 (ẹyọkan: ms) | |||||||
| Baiti 1 | Ni ipamọ | |||||||
Hardware Oṣo
Ṣọra
- Nigbagbogbo ka ipin yii ṣaaju fifi sori ẹrọ module!
- Oju gbigbona! Awọn dada ti awọn ile le di gbona nigba isẹ ti. Ti a ba lo ẹrọ naa ni awọn iwọn otutu ibaramu giga, jẹ ki ẹrọ naa tutu nigbagbogbo ṣaaju ki o to fọwọkan.
- Ṣiṣẹ lori awọn ẹrọ ti o ni agbara le ba ohun elo naa jẹ! Pa ipese agbara nigbagbogbo ṣaaju ṣiṣẹ lori ẹrọ naa.
Awọn ibeere aaye
The following drawings show the space requirements when installing the G-series modules. The spacing creates space for ventilation and prevents conducted electromagnetic interference from influencing the operation. Installation position is valid vertical and horizontally. The drawings are illustrative and may be out of proportion.
Ṣọra
KO tẹle awọn ibeere aaye le ja si ibajẹ ọja naa.
Oke Module to DIN Rail
Awọn wọnyi ipin apejuwe bi o lati gbe awọn module si DIN iṣinipopada.
Ṣọra
Awọn module gbọdọ wa ni titunse si awọn DIN iṣinipopada pẹlu awọn levers titiipa.
Oke GL-9XXX tabi GT-XXXX Module
Awọn itọnisọna wọnyi lo si awọn iru module wọnyi:
- GL-9XXX
- GT-1XXX
- GT-2XXX
- GT-3XXX
- GT-4XXX
- GT-5XXX
- GT-7XXX
Awọn modulu GN-9XXX ni awọn lefa titiipa mẹta, ọkan ni isalẹ ati meji ni ẹgbẹ. Fun awọn ilana iṣagbesori, tọka si Module Oke GN-9XXX.
Oke GN-9XXX Module
Lati gbe tabi yọ ohun ti nmu badọgba nẹtiwọọki kuro tabi module IO eto pẹlu orukọ ọja GN-9XXX, fun ex.ample GN-9251 tabi GN-9371, wo awọn ilana wọnyi:
Òke yiyọ ebute Block
Lati gbe tabi dismount a yiyọ kuro ebute Àkọsílẹ (RTB), wo awọn ilana ni isalẹ.
So Cables to yiyọ ebute Block
Lati sopọ / ge asopọ awọn kebulu si/lati ibi-ipamọ ebute yiyọ kuro (RTB), wo awọn ilana ni isalẹ.
IKILO
Nigbagbogbo lo awọn niyanju ipese voltage ati igbohunsafẹfẹ lati ṣe idiwọ ibajẹ si ẹrọ ati rii daju iṣẹ ṣiṣe to dara julọ.
Agbara aaye ati awọn pinni data
Communication between the G-series network adapter and the expansion module, as well as system/field power supply of the bus modules is carried out via the internal bus. It is comprised of 2 Field Power Pins and 6 Data Pins.
IKILO
Maṣe fi ọwọ kan data ati awọn pinni agbara aaye! Fọwọkan le ja si ile ati ibajẹ nipasẹ ariwo ESD.
| Pin ko si. | Oruko | Apejuwe |
| P1 | Eto VCC | Eto ipese voltage (5VDC) |
| P2 | Eto GND | Ilẹ System |
| P3 | Ijade tokini | Àmi o wu ibudo ti awọn isise module |
| P4 | Tẹlentẹle o wu | Atagba o wu ibudo ti isise module |
| P5 | Tẹlentẹle igbewọle | Olugba input ibudo ti isise module |
| P6 | Ni ipamọ | Ni ipamọ fun àmi fori |
| P7 | Aaye GND | Ilẹ aaye |
| P8 | Aaye VCC | Ipese aaye voltage (24VDC) |
FAQ
- Q: Kini MO le ṣe ti awọn afihan LED ba fihan awọn ilana ajeji?
- A: If the LED indicators display unusual patterns, check the wiring connections and ensure they are correctly set up. Refer to the LED indicator section in the manual for troubleshooting steps.
Awọn iwe aṣẹ / Awọn orisun
 |
Beijer Electronics GT-1238 Digital Input Module [pdf] Afowoyi olumulo GT-1238 Digital Input Module, GT-1238, Digital Input Module, Input Module |