Beijer Electronics GT-1238 Digital Input Module
Copyright © 2025 Beijer Electronics AB. All rights reserved. The information in this document is subject to change without notice and is provided as available at the time of printing. Beijer Electronics AB reserves the right to change any information without updating this publication. Beijer Electronics AB assumes no responsibility for any errors that may appear in this document. All examples in this document are only intended to improve understanding of the functionality and handling of the equipment. Beijer Electronics AB cannot assume any liability if these exampAna amfani da les a ainihin aikace-aikace. A ciki view daga cikin nau'ikan aikace-aikacen wannan software, masu amfani dole ne su sami isasshen ilimi da kansu don tabbatar da cewa an yi amfani da shi daidai a takamaiman aikace-aikacen su. Mutanen da ke da alhakin aikace-aikacen da kayan aiki dole ne da kansu su tabbatar da cewa kowane aikace-aikacen ya dace da duk buƙatun da suka dace, ƙa'idodi, da dokoki dangane da tsari da aminci. Beijer Electronics AB ba za ta karɓi wani alhaki ga duk wani lahani da ya faru yayin shigarwa ko amfani da kayan aiki da aka ambata a cikin wannan takarda. Beijer Electronics AB ya haramta duk gyare-gyare, canje-canje, ko canza kayan aiki.
Babban ofishi
- Beijer Electronics AB girma
- Akwatin 426
- 201 24 Malmö, Sweden
- www.beijerelectronics.com
- + 46 40 358600
Game da Wannan Jagoran
Wannan littafin ya ƙunshi bayani kan software da kayan masarufi na Beijer Electronics GT-1238 Digital Input Module. Yana ba da cikakkun bayanai masu zurfi, jagora akan shigarwa, saiti, da amfani da samfurin.
Alamomin da Aka Yi Amfani da su a cikin Wannan Jagoran
This publication includes Warnings, Cautions, Notes, and important icons where appropriate to point out safety-related or other important information. The corresponding symbols should be interpreted asfollows:
GARGADI
Alamar faɗakarwa tana nuna yanayi mai yuwuwar haɗari wanda, idan ba a kiyaye shi ba, zai iya haifar da mutuwa ko mummuna rauni, da babban lahani ga samfurin.
HANKALI
Alamar taka tsantsan tana nuna yanayi mai yuwuwar haɗari wanda, idan ba a kiyaye shi ba, zai iya haifar da ƙaramin rauni ko matsakaici, da matsakaicin lalacewa ga samfurin.
NOTE
Alamar bayanin kula tana faɗakar da mai karatu zuwa ga gaskiya da yanayi masu dacewa.
MUHIMMANCI
Muhimman alamar yana nuna mahimman bayanai.
Tsaro
Kafin amfani da wannan samfurin, da fatan za a karanta wannan jagorar da sauran littattafan da suka dace a hankali. Biya cikakken hankali ga umarnin aminci! Babu wani abu da Beijer Electronics zai kasance da alhakin ko alhakin lalacewa sakamakon amfani da wannan samfurin. Hotunan, examples da zane-zane a cikin wannan jagorar an haɗa su don dalilai na misali. Saboda yawancin masu canji da buƙatun da ke da alaƙa da kowane takamaiman shigarwa, Beijer Electronics ba zai iya ɗaukar nauyi ko alhaki don ainihin amfani dangane da tsohonamples da zane-zane.
Takaddun shaida na samfur
Samfurin yana da takaddun takaddun samfur masu zuwa.
Janar Bukatun Tsaro
GARGADI
- Kada a haɗa samfuran da wayoyi tare da wutar da aka haɗa da tsarin. Yin haka yana haifar da “bakin filashi”, wanda zai iya haifar da al’amura masu haɗari da ba zato ba tsammani (ƙonawa, wuta, abubuwa masu tashi, matsa lamba, fashewar sauti, zafi).
- Kar a taɓa tubalan tasha ko na'urorin IO lokacin da tsarin ke gudana. Yin hakan na iya haifar da girgiza wutar lantarki, gajeriyar kewayawa ko rashin aiki na na'urar.
- Kada ka bari abubuwan ƙarfe na waje su taɓa samfurin lokacin da tsarin ke gudana. Yin hakan na iya haifar da girgiza wutar lantarki, gajeriyar kewayawa ko rashin aiki na na'urar.
- Kada ka sanya samfurin kusa da abu mai ƙonewa. Yin hakan na iya haifar da gobara.
- Duk aikin wayoyi ya kamata injiniyan lantarki ya yi.
- Lokacin sarrafa kayan aikin, tabbatar da cewa duk mutane, wurin aiki da marufi suna da tushe sosai. Guji taɓa abubuwan da ke gudana, samfuran sun ƙunshi abubuwan lantarki waɗanda za a iya lalata su ta hanyar fitarwar lantarki.
HANKALI
- Kada a taɓa amfani da samfurin a cikin mahallin da zafin jiki sama da 60 ℃. Guji sanya samfurin a cikin hasken rana kai tsaye.
- Kada a taɓa amfani da samfurin a cikin mahallin sama da 90% zafi.
- Yi amfani da samfur koyaushe a cikin mahalli tare da gurɓataccen digiri 1 ko 2.
- Yi amfani da madaidaicin igiyoyi don yin wayoyi.
Game da Tsarin G-jerin
Tsarin ya ƙareview
- Module Adaftar hanyar sadarwa - Tsarin adaftar hanyar sadarwa yana samar da hanyar haɗin kai tsakanin bas ɗin filin da na'urorin filin tare da kayan haɓakawa. Haɗin zuwa tsarin bas na filin daban-daban na iya kafa ta kowane ɗayan adaftar cibiyar sadarwa mai dacewa, misali, don MODBUS TCP, Ethernet IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Serial da sauransu.
- Module Faɗawa - Nau'in nau'ikan haɓakawa: Digital IO, Analog IO, da na'urori na musamman.
- Messaging – The system uses two types of messaging: Service messaging and IO messaging. About the G-series System Beijer
IO Tsarin Taswirar Bayanai
Tsarin fadada yana da nau'ikan bayanai guda uku: bayanan IO, ma'aunin daidaitawa, da rajistar ƙwaƙwalwar ajiya. Ana yin musayar bayanai tsakanin adaftar cibiyar sadarwa da tsarin haɓakawa ta hanyar aiwatar da bayanan hoto na IO ta hanyar yarjejeniya ta ciki.
Data flow between the network adapter (63 slots) and expansion modules The input and output image data depend on the slot position and the data type of the expansion slot. The ordering of input and output process image data is based on the expansion slot position. Calculations for this arrangement are included in the manuals for the network adapter and programmable IO modules. Valid parameter data depends on the modules in use. For example, analogue modules have settings of either 0-20 mA or 4-20 mA, and temperature modules have settings such as PT100, PT200, and PT500. The documentation for each module provides a description of the parameter data.
Ƙayyadaddun bayanai
Ƙayyadaddun Muhalli
- Yanayin aiki -20 ° C - 60 ° C
- UL temperature -20°C – 60°C
- Zafin ajiya -40 ° C - 85 ° C
- Relative humidity 5% – 90% non-condensing
- Dutsen DIN dogo
- Shock operating IEC 60068-2-27 (15G)
- Vibration resistance IEC 60068-2-6 (4 g)
- Industrial emissions EN 61000-6-4: 2019
- Industrial immunity EN 61000-6-2: 2019
- Installation position Vertical and horizontal
- Product certifications CE, FCC, UL, cUL
Gabaɗaya Bayani
- Power dissipation Max. 35 mA @ 5 VDC
- Isolation I/O to logic: Photocoupler isolation
- Field power Supply voltage: 24 VDC maras kyau
- Voltage kewayon: 15-30 VDC
- Rashin wutar lantarki: 0mA @ 24 VDC
- Wiring I/O cable max. 2.0 mm² (AWG 14)
- Torque 0.8 Nm (7 lb-in)
- Nauyi 59 g
- Module size 12 mm x 99 mm x 70 mm
Girma
Ƙididdigar shigarwa
| Abubuwan shigarwa kowane module | 8 points universal type |
| Manuniya | Matsayin shigarwar kore 8 |
| On-jihar voltage | 24 VDC mara kyau
15 - 26.4 VDC @ 70 ℃ 15 - 28.8 VDC @ 60 ℃ |
| Yanayin halin yanzu | 4 mA @ 24 VDC
5 mA @ 30 VDC |
| Off-jihar voltage | 12.5 VDC @ 25 ℃ |
| Jinkirin siginar shigarwa | KASHE zuwa: Max. 0.3 ms
KUNNA zuwa KASHE: Max. 0.3 ms |
| Tace ta shiga | Daidaitacce, har zuwa 10 ms |
| Ƙunƙarar shigar da ƙima | 5.4K Ω na al'ada |
| Nau'in gama gari | maki 8 / 2 COM (na duniya) |
Tsarin Waya
| Fil babu. | Bayanin sigina |
| 0 | Tashar shigarwa 0 |
| 1 | Tashar shigarwa 1 |
| 2 | Tashar shigarwa 2 |
| 3 | Tashar shigarwa 3 |
| 4 | Tashar shigarwa 4 |
| 5 | Tashar shigarwa 5 |
| 6 | Tashar shigarwa 6 |
| 7 | Tashar shigarwa 7 |
| 8 | Na gama-gari (Ma'aikacin sink. 0 V / Mai sarrafa tushen. 24V) |
| 9 | Na gama-gari (Ma'aikacin sink. 0 V / Mai sarrafa tushen. 24V) |
Alamar LED
| LED no. | LED aiki / bayanin | LED launi |
| 0 | INPUT tashar 0 | Kore |
| 1 | INPUT tashar 1 | Kore |
| 2 | INPUT tashar 2 | Kore |
| 3 | INPUT tashar 3 | Kore |
| 4 | INPUT tashar 4 | Kore |
| 5 | INPUT tashar 5 | Kore |
| 6 | INPUT tashar 6 | Kore |
| 7 | INPUT tashar 7 | Kore |
Matsayin Tashoshin LED
| Matsayi | LED | Nuni |
| Babu sigina | Kashe | Aiki na al'ada |
| Kan sigina | Kore | Aiki na al'ada |
Taswirar Bayanai A cikin Teburin Hoto
Bayanan shigarwar module
| D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
Shigar da ƙimar hoton
| Bit no. | Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
| Baiti 0 | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
Bayanan Sigar
Tsawon siga mai inganci: 2 bytes
| Bit no. | Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
| Baiti 0 | Ƙimar tace shigarwa: 0 - 10 (raka'a: ms) | |||||||
| Baiti 1 | Ajiye | |||||||
Saitin Hardware
HANKALI
- Koyaushe karanta wannan babin kafin shigar da tsarin!
- Zafi mai zafi! Fuskar gidan na iya zama zafi yayin aiki. Idan ana amfani da na'urar a cikin yanayin yanayin zafi, koyaushe bari na'urar ta yi sanyi kafin ta taɓa ta.
- Yin aiki akan na'urori masu ƙarfi na iya lalata kayan aiki! Koyaushe kashe wutar lantarki kafin aiki akan na'urar.
Bukatun sararin samaniya
The following drawings show the space requirements when installing the G-series modules. The spacing creates space for ventilation and prevents conducted electromagnetic interference from influencing the operation. Installation position is valid vertical and horizontally. The drawings are illustrative and may be out of proportion.
HANKALI
RASHIN bin buƙatun sarari na iya haifar da ɓata samfurin.
Dutsen Module zuwa DIN Rail
Babi masu zuwa suna bayyana yadda ake hawan tsarin zuwa dogo na DIN.
HANKALI
Dole ne a daidaita tsarin zuwa layin dogo na DIN tare da maƙallan kullewa.
Dutsen GL-9XXX ko GT-XXXX Module
Umurnai masu zuwa sun shafi waɗannan nau'ikan samfura:
- GL-9XXX
- GT-1XXX
- GT-2XXX
- GT-3XXX
- GT-4XXX
- GT-5XXX
- GT-7XXX
Modulolin GN-9XXX suna da levers na kulle guda uku, ɗaya a ƙasa da biyu a gefe. Don umarnin hawa, koma zuwa Module Dutsen GN-9XXX.
Module Dutsen GN-9XXX
Don hawa ko saukar da adaftar cibiyar sadarwa ko tsarin IO mai tsari tare da sunan samfurin GN-9XXX, don ex.ampGN-9251 ko GN-9371, duba waɗannan umarnin:
Tushen Tasha Mai Cirewa
Don hawa ko saukar da toshe mai cirewa (RTB), duba umarnin da ke ƙasa.
Haɗa igiyoyi zuwa Toshe Tasha Mai Cirewa
Don haɗa/cire haɗin igiyoyi zuwa/daga cikin toshe mai cirewa (RTB), duba umarnin da ke ƙasa.
GARGADI
Koyaushe amfani da shawarar samarwa voltage da mita don hana lalacewar kayan aiki da kuma tabbatar da kyakkyawan aiki.
Wurin Wuta da Fil ɗin Bayanai
Communication between the G-series network adapter and the expansion module, as well as system/field power supply of the bus modules is carried out via the internal bus. It is comprised of 2 Field Power Pins and 6 Data Pins.
GARGADI
Kar a taɓa bayanan da filayen ikon filin! Taɓawa na iya haifar da lalacewa da lalacewa ta hanyar hayaniyar ESD.
| Fil babu. | Suna | Bayani |
| P1 | Tsarin VCC | Samar da tsarin voltage (5VDC) |
| P2 | Tsarin GND | Tsarin ƙasa |
| P3 | Fitowar alama | Token fitarwa tashar jiragen ruwa na processor module |
| P4 | Serial fitarwa | Mai watsa fitarwa tashar jiragen ruwa na processor module |
| P5 | Shigar da serial | Mai shigar da tashar tashar mai karɓar mai sarrafawa |
| P6 | Ajiye | An tanada don alamar wucewa |
| P7 | Filin GND | Filin filin |
| P8 | Filin VCC | Samar da filin voltage (24VDC) |
FAQ
- Tambaya: Menene ya kamata in yi idan alamun LED sun nuna alamu mara kyau?
- A: If the LED indicators display unusual patterns, check the wiring connections and ensure they are correctly set up. Refer to the LED indicator section in the manual for troubleshooting steps.
Takardu / Albarkatu
 |
Beijer Electronics GT-1238 Digital Input Module [pdf] Manual mai amfani GT-1238 Module Input na Dijital, GT-1238, Module ɗin shigarwar dijital, Module ɗin shigarwa |