UNITRONICS UIA-0006 Uni-Input-Output Module

Ulwazi lweMveliso

Imodyuli ye-Uni-I / OTM yintsapho yeemodyuli ze-Input / Output ezihambelana ne-platform yokulawula ye-UniStreamTM. Yenzelwe ukusebenza kunye nabalawuli be-CPU, iiphaneli ze-HMI, kunye neemodyuli ze-I / O zendawo ukuze zenze i-All-in-one Programmable Logic Controller (PLC). Imodyuli ye-UIA-0006 yimodyuli eyodwa kolu sapho kwaye esi sikhokelo sibonelela ngolwazi olusisiseko lofakelo kuyo. Iinkcukacha zobugcisa kwiimodyuli ze-Uni-I/OTM zinokukhutshelwa kwi-Unitronics webindawo.

Imiyalelo yokusetyenziswa kwemveliso

Ukufakela iimodyuli ze-Uni-I/OTM, landela la manyathelo:

1. Ngasemva kwayo nayiphi na iPaneli ye-HMI ye-UniStream TM equka i-CPU-for-Panel.
2. Kwi-DIN-umzila, usebenzisa iKhithi yoKwandiswa kweNdawo.

Inani eliphezulu leemodyuli ze-Uni-I/OTM ezinokudityaniswa kumlawuli omnye we-CPU zilinganiselwe. Ukufumana iinkcukacha kwimida ethile, nceda ubhekisele kumaphepha enkcazo ye-UniStream TM CPU okanye nayiphi na i-Kits yeNdawo yoKwandiswa kweNdawo efanelekileyo.

Ngaphambi kokuba Uqale
Ngaphambi kokufaka isixhobo, isifakeli kufuneka:

• Funda kwaye uqonde isikhokelo somsebenzisi.
• Qinisekisa imixholo yekhithi.

Iimfuno zoKhetho loFakelo
Ukuba ufaka imodyuli ye-Uni-I/OTM kwi:

• Iphaneli ye-HMI ye-UniStream TM: Iphaneli kufuneka iqule i-CPU-for-Panel, efakwe ngokwe-CPU-for-Panel yokufakela isikhokelo.
• I-DIN-rail: Kufuneka usebenzise i-Local Expansion Kit, ekhoyo ngomyalelo ohlukeneyo, ukudibanisa iimodyuli ze-Uni-I / OTM kwi-DIN-rail kwi-UniStream TM yokulawula inkqubo.

Iimpawu zesilumkiso kunye nezithintelo ngokubanzi
Xa kukho naziphi na iisimboli zilandelayo zivelayo, funda ulwazi olunxulumeneyo ngononophelo:

Uphawu	Intsingiselo	Inkcazo
Ingozi	Ingozi echongiweyo ibangela umonakalo emzimbeni kunye nepropathi.
Isilumkiso	Ingozi echongiweyo inokubangela umzimba kunye nepropathi umonakalo.
Isilumkiso	Lumka.

Zonke exampi-les kunye nemizobo enikwe kwisikhokelo somsebenzisi yenzelwe ukunceda ukuqonda kwaye ayiqinisekisi ukusebenza. I-Unitronics ayilwamkeli uxanduva lokusetyenziswa kokwenene kwale mveliso ngokusekelwe kwezi exampLes. Nceda ulahle le mveliso ngokwemigangatho nemimiselo yasekhaya neyesizwe. Le mveliso kufuneka ifakwe kuphela ngabasebenzi abaqeqeshiweyo. Ukungaphumeleli ukuthobela izikhokelo zokhuseleko ezifanelekileyo kunokubangela ukulimala kakhulu okanye umonakalo wepropati. Musa ukuzama ukusebenzisa esi sixhobo ngeeparamitha ezidlula imigangatho evumelekileyo. Musa ukuqhagamshela/uqhawule uqhagamshelwano xa umbane uvuliwe.

Ukuqwalaselwa kokusingqongileyo
Qwalasela oku kulandelayo xa ufaka imodyuli ye-Uni-I/OTM:

• Ukungena komoya: I-10mm (0.4) yendawo iyafuneka phakathi kweephetho zesixhobo eziphezulu/ezisezantsi kunye neendonga zendawo ebiyelweyo.
• Musa ukufaka kwiindawo ezine: uthuli olugqithisileyo okanye oluqhubekileyo, igesi edlayo okanye enokutsha, ukufuma okanye imvula, ubushushu obugqithisileyo, ukothuka kwempembelelo rhoqo okanye ukungcangcazela okugqithisileyo, ngokuhambelana nemigangatho kunye nemida enikwe kwiphepha lenkcazo yobugcisa bemveliso.
• Musa ukubeka emanzini okanye ukuvumela amanzi avuze kwiyunithi.
• Musa ukuvumela i-debris iwele ngaphakathi kwiyunithi ngexesha lofakelo.
• Faka kumgama ophezulu ukusuka kwivolthi ephezulutagiintambo kunye nezixhobo zombane.

Imixholo yeKit

• Imodyuli ye-1 UIA-0006
• Iibhloko ze-terminal ezi-4 ze-I/O (ezi-2 ezimnyama nezi-2 ezingwevu)
• Iikliphu ezi-1 ze-DIN-kaloliwe-Nikezela ngenkxaso yomzimba kwi-CPU kunye neemodyuli. Kukho iziqeshana ezimbini: enye phezulu (ibonisiwe), enye isezantsi (engaboniswanga).
• 2 Iziphumo 0-1 – Amanqaku oqhagamshelwano lwemveliso
• 1 Isiphumo 2

I-Uni-I/O™ lusapho lweemodyuli zeNgeniso/IziPhumo ezihambelana neqonga lolawulo le-UniStream™. Esi sikhokelo sibonelela ngolwazi olusisiseko lofakelo lwemodyuli ye-UIA-0006.
Iinkcukacha zobugcisa zinokukhutshelwa kwi-Unitronics webindawo.
Iqonga le-UniStream ™ liquka abalawuli be-CPU, iiphaneli ze-HMI, kunye neemodyuli ze-I/O zasekuhlaleni ezithi xubana zenze i-All-in-one Programmable Logic Controller (PLC).
Faka iimodyuli ze-Uni-I/O™:

• Ngasemva kwayo nayiphi na iPaneli ye-HMI ye-UniStream™ equka i-CPU-for-Panel.
• Kwi-DIN-umzila, usebenzisa iKhithi yoKwandiswa kweNdawo.

Elona nani likhulu leemodyuli ze-Uni-I/O™ ezinokudityaniswa kumlawuli omnye we-CPU zilinganiselwe. Ukufumana iinkcukacha, nceda ujonge kumaphepha acacisiweyo eUniStream™ CPU okanye naziphi na iiKits ezifanelekileyo zeNdawo zoKwandiswa.

Ngaphambi kokuba Uqale

Ngaphambi kokufaka isixhobo, isifakeli kufuneka:

• Funda kwaye uqonde olu xwebhu.
  • Qinisekisa imixholo yeKit.

Iimfuno zokhetho lofakelo
Ukuba uhlohla imodyuli ye-Uni-I/O™ kwi:

• Iphaneli ye-HMI ye-UniStream™; iPaneli kufuneka iqulathe i-CPU-for-Panel, efakwe ngokwe-CPU-for-Panel isikhokelo sokufakela.
  • I-DIN-kaloliwe; kufuneka usebenzise iKhithi yoKwandiswa kweNdawo, ekhoyo ngeodolo eyahlukileyo, ukudibanisa iimodyuli ze-Uni-I/O™ kwi-DIN-umzila kaloliwe kwisixokelelwano solawulo se-UniStream™.

Iimpawu zesilumkiso kunye nezithintelo ngokubanzi
Xa kukho naziphi na iisimboli zilandelayo zivelayo, funda ulwazi olunxulumeneyo ngononophelo.

• Zonke exampi-les kunye nemizobo yenzelwe ukunceda ukuqonda, kwaye ayiqinisekisi ukusebenza. I-Unitronics ayilwamkeli uxanduva lokusetyenziswa kokwenene kwale mveliso ngokusekelwe kwezi examples.
• Nceda ulahle le mveliso ngokwemigangatho nemimiselo yasekhaya neyesizwe.
• Le mveliso kufuneka ifakwe kuphela ngabasebenzi abaqeqeshiweyo.
• Ukungaphumeleli ukuthobela izikhokelo zokhuseleko ezifanelekileyo kunokubangela ukulimala kakhulu okanye umonakalo wepropati.
• Musa ukuzama ukusebenzisa esi sixhobo ngeeparamitha ezidlula imigangatho evumelekileyo.
• Musa ukuqhagamshela/uqhawule uqhagamshelwano xa umbane uvuliwe.

Ukuqwalaselwa kokusingqongileyo 

• Ukungena komoya: 10mm (0.4”) yendawo iyafuneka phakathi kwesiphelo sesixhobo esingaphezulu/esezantsi kunye neendonga zoluvalo.
• Musa ukufaka kwiindawo ezine: uthuli olugqithisileyo okanye oluqhubekileyo, igesi edlayo okanye enokutsha, ukufuma okanye imvula, ubushushu obugqithisileyo, ukothuka kwempembelelo rhoqo okanye ukungcangcazela okugqithisileyo, ngokuhambelana nemigangatho kunye nemida enikwe kwiphepha lenkcazo yobugcisa bemveliso.
• Musa ukubeka emanzini okanye ukuvumela amanzi avuze kwiyunithi.
• Musa ukuvumela i-debris iwele ngaphakathi kwiyunithi ngexesha lofakelo.
• Faka kumgama ophezulu ukusuka kwivolthi ephezulutagiintambo kunye nezixhobo zombane.

Imixholo yeKit

• Imodyuli ye-1 UIA-0006
• Iibhloko ze-terminal ezi-4 ze-I/O (ezi-2 ezimnyama nezi-2 ezingwevu)

Umzobo we-UIA-0006

1	Iikliphu ze-DIN-kaloliwe	Ukubonelela ngenkxaso yomzimba kwi-CPU kunye neemodyuli. Kukho iziqeshana ezimbini: enye phezulu (ibonisiwe), enye isezantsi (engaboniswanga).
2	Iziphumo 0-1	Amanqaku oqhagamshelwano lwemveliso
3	Iziphumo 2
4	I/O Ibhasi – Ekhohlo	Icala lasekhohlo Isidibanisi
5	Isitshixo sokuQhagamshelwa kwebhasi	Slayida iSitshixo sesiQhagamshelwano seBhasi ngasekhohlo, ukudibanisa ngombane imodyuli ye-Uni- I/O™ kwi-CPU okanye imodyuli esecaleni.
6	I/O Ibhasi – Ekunene	Isidibanisi secala lasekunene, sithunyelwe sigqunyiwe. Shiya igqunyiwe xa ingasetyenziswa.
	I-Bus Connector Cover
7	Iziphumo 4-5	Amanqaku oqhagamshelwano lwemveliso
8	Iziphumo 3
9	Iziphumo 3-5 LEDs	Ii-LED ezibomvu
10	Iziphumo 0-2 LEDs	Ii-LED ezibomvu
11	Imeko ye-LED	I-Tricolor LED, eluhlaza / ebomvu / e-Orenji

PHAWULA
Jonga kwiphepha lengcaciso yemodyuli yezalathisi ze-LED.

12	Umnyango wemodyuli	Ithunyelwe ngenqanawa igqunywe ngeteyiphu yokukhusela ukuthintela ucango ukuba ungakrwelwa. Susa iteyiphu ngexesha lofakelo.
13	Screw imingxuma	Yenza ukufakwa kweephaneli umngxuma ububanzi: 4mm (0.15”).

Izixhumi zebhasi ze-I / O zibonelela ngamanqaku okudibanisa ngokomzimba kunye nombane phakathi kweemodyuli. Isidibanisi sithunyelwa sigutyungelwe sikhuselo esikhuselayo, sikhusela ikhonkco kwi-debris, umonakalo, kunye ne-ESD.
I-I/O Bus – Ekhohlo (#4 kumzobo) inokudityaniswa nokuba yi-CPU-for-Panel, imodyuli ye-Uni-COM™, kwenye imodyuli ye-Uni-I/O™ okanye kwiYunithi yokuPhela yoLwandiso lweNdawo. Ikhithi.
I-O / O Ibhasi - Ekunene (#6 kumzobo) inokudityaniswa kwenye imodyuli ye-I / O, okanye kwiCandelo leSiseko seNdawo yoKwandiswa kweNdawo.

Isilumkiso

• Cima amandla enkqubo phambi kokudibanisa okanye ukuqhawula nayiphi na iminqongo okanye izixhobo.
• Sebenzisa izilumkiso ezifanelekileyo ukukhusela i-Electro-Static Discharge (ESD).

Ukuhlohla iModyuli ye-Uni-I/O™ kwiPhaneli ye-HMI ye-UniStream™
PHAWULA Ulwakhiwo lodidi lwe-DIN-kaloliwe ngasemva kwendawo yolawulo lubonelela ngenkxaso ebonakalayo kwimodyuli ye-Uni-I/O™.

1. Jonga iyunithi oza kuqhagamshela kuyo imodyuli ye-Uni-I/O™ ukuqinisekisa ukuba isiQhagamshelwano saso seBhasi asigqunywanga. Ukuba imodyuli ye-Uni-I/O™ iya kuba yeyokugqibela kuqwalaselo, musa ukususa isigqubuthelo seSiqhagamshelo seBhasi ye-I/O – Ekunene.
2. Vula ucango lwemodyuli ye-Uni-I/O™ kwaye uyibambe njengoko kubonisiwe kumzobo ohamba nalo.
3. Sebenzisa itonela yesikhokelo ephezulu nasezantsi (ulwimi & nomjelo) ukutyibilikisa imodyuli ye-Uni-I/O™ endaweni.
4. Qinisekisa ukuba iikliphu zikaloliwe zeDIN ezibekwe phezulu nasezantsi kwimodyuli ye-Uni-I/O™ ziye zangena kwi-DIN-rail.
   
5. Slayida isiQhagamshelwano seBhasi yonke indlela ukuya ekhohlo njengoko kubonisiwe kumzobo ohamba neli phepha.
6. Ukuba sele kukho imodyuli ebekwe ngasekunene kwayo, gqibezela uqhagamshelo ngokutyixa isitshixo soQhagamshelwano lweBhasi yeyunithi esecaleni ukuya ekhohlo.
7. Ukuba imodyuli yeyokugqibela kuqwalaselo, shiya i-I/O isidibanisi sebhasi sigqunyiwe.
   Ukususa iModyuli 
8. Cima amandla enkqubo.
9. Nqamula iitheminali ze-I/O (#2,3,7,8 kumzobo).
10. Susa uqhagamshelwano lwemodyuli ye-Uni-I/O™ kwiiyunithi ezimeleneyo: tyibilikisa iSitshixo sesiQhagamshelwano seBhasi ekunene. Ukuba kukho iyunithi ebekwe ekunene kwayo, tyibela isitshixo sale modyuli ekunene ngokunjalo.
11. Kwimodyuli ye-Uni-I/O™, tsala ikliphu ephezulu kaloliwe ye-DIN phezulu kunye nekliphu esezantsi ezantsi.
12. Vula ucango lwe-Uni-I/O™ uze ulubambe ngeminwe emibini njengoko kubonisiwe kumfanekiso okwiphepha lesi-3; uze uyitsale ngononophelo kwindawo yayo.

Ukufakela iimodyuli ze-Uni-I/O™ kwi-DIN-rail 

Ukunyusela iimodyuli kwi-DIN-umzila, landela amanyathelo 1-7 ngaphakathi
Ukuhlohla iModyuli ye-Uni-I/O™ kwiPhaneli ye-HMI ye-UniStream™.
Ukuze uqhagamshele iimodyuli kwisilawuli se-UniStream™, kufuneka usebenzise iKhithi yoKwandiswa kweNgingqi.
Ezi zixhobo ziyafumaneka kunye nangaphandle kwezixhobo zombane, kunye neentambo zobude obahlukeneyo. Ngolwazi olupheleleyo, nceda ujonge kwisikhokelo sofakelo seKhithi yoKwandiswa kweNdawo efanelekileyo.

Iimodyuli zamanani
Unganombola iimodyuli ngeenjongo zereferensi. Iseti yezitikha ezingama-20 zibonelelwa nge-CPU-for-Panel nganye; sebenzisa ezi zincamathelisi ukufaka iinombolo kwiimodyuli.

• Iseti iqulethe izitikha ezinenombolo nezingenanto njengoko kubonisiwe kumfanekiso ongasekhohlo.
• Zibeke kwiimodyuli njengoko kubonisiwe kumfanekiso osekunene.

Ukuthotyelwa kwe-UL

Eli candelo lilandelayo lifanelekile kwiimveliso ze-Unitronics ezidweliswe kunye ne-UL.
Le mifuziselo ilandelayo: UIA-0006, UID-0808R, UID-W1616R,UIS-WCB1 zi-UL zidweliswe kwiiNdawo ezinobungozi. Le mizekelo ilandelayo: UIA-0006, UIA-0402N,UIA-0402NL,UIA-0800N,UID-0016R,UID-0016RL,
UID-0016T, UID-0808R, UID-0808RL, UID-0808T, UID-0808THS, UID-0808THSL, UID-0808TL, UID-1600, UID-1600L, UID-W1616R, UID-1616THS, UID-04THSL, UID-04TL, UID-08, UID-1L, UID-W2R, XNUMX-UIDTNXNUMX-UIDTNXNUMX XNUMXPTN, UIS-XNUMXTC, UIS-WCBXNUMX, UIS-WCBXNUMX
zidweliswe kwi-UL yeNdawo eQhelekileyo.

Imilinganiselo ye-UL, abalawuli abaCwangcisiweyo abaSebenzisa kwiiNdawo ezinobungozi, iKlasi I, iCandelo 2, Amaqela A, B, C kunye no-D
La maNqaku oKhupho anxulumene nazo zonke iimveliso ze-Unitronics ezineempawu ze-UL ezisetyenziselwa ukuphawula iimveliso ezivunyiweyo ukuba zisetyenziswe kwiindawo ezinobungozi, iKlasi yoku-I, iCandelo lesi-2, iQela A, B, C kunye no-D.

Isilumkiso 

•  Esi sixhobo sifanelekile ukusetyenziswa kwiKlasi yoku-I, iCandelo lesi-2, amaQela A, B, C kunye no-D, okanye iindawo ezingezizo ezinobungozi kuphela.
• I-input kunye ne-output wiring kufuneka ihambelane neKlasi I, iCandelo le-2 iindlela zocingo kunye nokuhambelana negunya elinegunya.
• ISILUMKISO—Ugqabhuko-dubulo Ingozi-ukutshintshwa kwamacandelo kunokuphazamisa ukufaneleka kweKlasi I, iCandelo lesi-2.
• ISILUMKISO – INGOZI YOKUQHUBEKA – Musa ukudibanisa okanye ukuqhawula izixhobo ngaphandle kokuba umbane ucinyiwe okanye indawo leyo yaziwa ngokuba ayinabungozi.
• ISILUMKISO – Ukuvezwa kwezinye iikhemikhali kungonakalisa iipropathi zokutywina zezinto ezisetyenziswa kwiiRelays.
• Esi sixhobo kufuneka sifakwe kusetyenziswa iindlela zocingo njengoko zifuneka kwiKlasi I, iCandelo 2 ngokwe-NEC kunye / okanye i-CEC.

Iintambo 

• Esi sixhobo senzelwe ukusebenza kuphela kwi-SELV/PELV/Class 2/Limited Power environments.
• Zonke izixhobo zombane kwinkqubo kufuneka zibandakanye ukugquma kabini. Iziphumo zonikezelo lwamandla kufuneka zilinganiswe njenge-SELV/PELV/Class 2/Limited Power.
• Sukuqhagamshela nokuba yi-'Neutral' okanye 'Layini' isignali ye-110/220VAC kwindawo ye-0V yesixhobo.
• Musa ukubamba iingcingo eziphilayo.
• Yonke imisebenzi yokufaka iintambo kufuneka yenziwe ngelixa umbane LUVALIWE.
• Sebenzisa ukhuseleko lwangoku, olufana ne-fuse okanye i-breaker circuit, ukunqanda imisinga egqithisileyo kwi-UIA-0006 port port.
• Amanqaku angasetyenziswanga akufanele adityaniswe (ngaphandle kokuba kuchazwe ngenye indlela). Ukungawuhoyi lo myalelo kungonakalisa isixhobo.
• Jonga kwakhona zonke iintambo phambi kokuba uvule unikezelo lombane.

Isilumkiso 

• Ukuze ugweme ukonakalisa ucingo, sebenzisa i-torque ephezulu ye-0.5 N · m (5 kgf·cm).
• Musa ukusebenzisa itoti, i-solder, okanye nayiphi na into kucingo olukhutshiweyo olunokubangela ukuba umsonto wocingo uqhawuke.
• Faka kumgama ophezulu ukusuka kwivolthi ephezulutagiintambo kunye nezixhobo zombane.

Inkqubo yocingo
Sebenzisa iitheminali zecrimp kwi-wiring; sebenzisa i-26-12 AWG ucingo (0.13 mm2 -3.31 mm2).

1. Hlubula ucingo ukuya kubude be-7±0.5mm (0.250-0.300 intshi).
2. Khulula i-terminal ukuya kwindawo yayo ebanzi phambi kokufaka ucingo.
3. Faka ucingo ngokupheleleyo kwi-terminal ukuqinisekisa uqhagamshelo olufanelekileyo.
4. Qinisa ngokwaneleyo ukugcina ucingo lungatsali lukhululekile.

Amanqaku oQhagamshelwano lwe-UIA-0006
Yonke imizobo yocingo kunye nemiyalelo kolu xwebhu ibhekiselele kwiindawo zoqhagamshelo ze-UIA-0006.
Ezi ngongoma zicwangciswe ngamaqela amane amanqaku angama-7 njengoko kuboniswe kumfanekiso osekunene.

Amaqela amabini aphezulu
Amanqaku oqhagamshelwano lweziphumo

Amaqela amabini asezantsi
Iziphumo kunye neendawo zoqhagamshelwano zombane

Izikhokelo zocingo
Ukuqinisekisa ukuba isixhobo siya kusebenza ngokufanelekileyo kwaye sithintele ukuphazamiseka kwe-electromagnetic:

• Sebenzisa ikhabhinethi yentsimbi. Qinisekisa ukuba ikhabhinethi kunye neengcango zayo zinomhlaba ngokufanelekileyo.
• Sebenzisa iingcingo ezinobungakanani obufanelekileyo bomthwalo.
• Sebenzisa iintambo ezijijekileyo ezikhuselweyo zocingo lweempawu ze-Analog I/O; musa ukusebenzisa ikhaka lentambo njengophawu oluqhelekileyo (CM) / indlela yokubuya.
• Hambisa umqondiso we-I/O nganye ngocingo oluzinikeleyo oluqhelekileyo. Xhuma iingcingo eziqhelekileyo kwiindawo zazo eziqhelekileyo (CM) kwimodyuli ye-I/O.
• Ngokukodwa qhagamshela indawo nganye ye-0V kunye nendawo nganye eqhelekileyo (CM) kwisistim ukuya kumbane we-terminal ye-0V, ngaphandle kokuba kuchazwe ngenye indlela.
• Ngomntu ngamnye udibanise indawo esebenzayo yomhlaba () kumhlaba wenkqubo (ngokukhethekileyo kwi-chassis yekhabhinethi yesinyithi).
  Sebenzisa ezona ngcingo zimfutshane nezingqindilili kangangoko kunokwenzeka: ngaphantsi kwe-1m (3.3') ngobude, ubukhulu obuncinane yi-14 AWG (2 mm2).
• Qhagamshela unikezelo lwamandla 0V kumhlaba wenkqubo.
  Ukwenza ikhuselo leentambo:
  • Xhuma i-cable shield kumhlaba wenkqubo - ngokukhethekileyo kwi-chassis yekhabhinethi yensimbi. Qaphela ukuba isikhuselo kufuneka sidibaniswe kuphela ekupheleni kwentambo; ngokwesiqhelo, ukubeka ikhaka kwisiphelo se-UIA-0006 kusebenza ngcono.
  • Gcina uqhagamshelo lwekhaka lufutshane kangangoko.
  • Qinisekisa ukuqhubekeka kwekhaka xa usandisa iintambo ezikhuselekileyo.

PHAWULA 

• Ngolwazi oluneenkcukacha, bhekisa kuxwebhu lweSikhokelo sokuSebenza ngoNxibelelwano lweNdlela, olubekwe kwiThala leeNcwadi loBugcisa kwi-Unitronics' webindawo.

Ukufakela iNgcaciso yoMbane
Le modyuli ifuna unikezelo lwamandla lwangaphandle lwe-24VDC.

• Kwimeko yomqulutage ukuguquguquka okanye ukungahambelani nomqulutage iinkcukacha zonikezelo lwamandla, qhagamshela isixhobo kunikezelo lwamandla olulawulwayo.

Qhagamshela iitheminali ze-24V kunye ne-0V njengoko kubonisiwe kumzobo ohamba kunye.

Ukufakela iintambo kwiZiphumo zeAnalog 

PHAWULA

• Isiphumo ngasinye sibonelela ngeendlela ezimbini: umthamotage okanye okwangoku. Ungacwangcisa imveliso nganye ngokuzimeleyo. Imowudi imiselwa zombini ngocingo kunye noqwalaselo hardware ngaphakathi isicelo software.
• Umqulutage kunye neendlela zangoku zisebenzisa amanqaku ahlukeneyo. Qhagamshela kuphela inqaku elinxulumene nemo ekhethiweyo; shiya elinye inqaku lingadityaniswanga.
• Imveliso nganye inenqaku layo eliqhelekileyo (CM0 ye-O0 njl njl). Qhagamshela imveliso nganye ye-analog usebenzisa inqaku elihambelanayo leCM.
  • Musa ukudibanisa indawo eqhelekileyo (CM) kwindawo ye-0V.
• Musa ukusebenzisa amanqaku aqhelekileyo (CM) nayiphi na injongo ngaphandle kokudibanisa umthwalo wemveliso ye-analog. Ukuzisebenzisa ngayo nayiphi na enye injongo kungonakalisa imodyuli.

 

IiNgcaciso zobuGcisa

Esi sikhokelo sibonelela ngeenkcukacha zeUnitronics' Uni-I/O™ imodyuli ye-UIA-0006. Le modyuli iquka:

• 6 iziphumo analog, 13/14 bit

Iimodyuli ze-Uni-I/O ziyahambelana nosapho lwe-UniStream™ lwabaLawuli beNgcaciso abaCwangcisiweyo. Zisenokutsalwa ngasemva kwePaneli ye-HMI ye-UniStream ™ ecaleni kwe-CPU-ye-Panel ukwenza isilawuli se-HMI + PLC yonke-in-one, okanye ifakwe kuloliwe oqhelekileyo we-DIN usebenzisa i-Adapter yoKwandiswa kweNdawo.
Izikhokelo zoFakelo ziyafumaneka kwiThala leencwadi lobuGcisa le-Unitronics www.unitronics.com

Iziphumo zeAnalog
Inani leziphumo				6
Uluhlu lwemveliso (1Impazamo! Umthombo wereferensi awufunyenwanga.)				Isiphumo Uhlobo		Iinqobo ezisemgangathweni	Iinqobo zoluhlu olugqithisileyo		Ukuphuphuma kwemilinganiselo
				0÷10VDC		0≤Vout≤10VDC	10		IVout>10.15VDC
				-10÷10VDC		-10≤Vout≤10VDC	-10.15 £ Vout<-10VDC 10		I-Vout<-10.15VDC Vout>10.15VDC
				0÷20mA		0≤Iout≤20mA	20≤Iout≤20.3mA		Iout>20.3mA
				4÷20mA		4≤Iout≤20mA	20≤Iout≤20.3mA		Iout>20.3mA
Ukuzahlula voltage
Imveliso kwibhasi				500 VAC ngomzuzu omnye
Imveliso kwimveliso				Akukho nanye
Imveliso yonikezelo lwamandla ebhasini				500 VAC ngomzuzu omnye
Imveliso yonikezelo lwamandla kwimveliso				Akukho nanye
Isigqibo				0 ÷ 10VDC - 14 bit -10 ÷ 10VDC – 13 bit + sayina 0 ÷ 20mA – 13 bit 4 ÷ 20mA - 13 bit
Ukuchaneka (25°C /-20°C ukuya kuma-55°C)				±0.3% / ±0.5% yesikali esipheleleyo (Voltage) ±0.5% / ±0.7% yesikali esipheleleyo (Okwangoku)
Layisha impedance				Umqulutage – 2kΩ ubuncinci Okwangoku – 600Ω ubuninzi
Ixesha lokumisa (95% yexabiso elitsha)				0 ÷ 10VDC - 1.8ms (2kΩ umthwalo ochasayo), 3.7ms (2kΩ + 1uF umthwalo) -10 ÷ 10VDC - 3ms (2kΩ umthwalo ochasayo), 5.5ms (2kΩ + 1uF umthwalo) 0 ÷ 20mA kunye ne-4 ÷ 20mA - 1.7ms (600Ω umthwalo), 1.7ms (600Ω + 10mH umthwalo)
Intambo				Isibini esijijekileyo esikhuselekileyo
Uxilongo (0)				Umqulutage – Iziphumo zikhuselwe ixesha elifutshane kodwa akukho nto isalathisayo yesoftware yangoku – Vula isalathiso sesekethe
Ukunikezwa Amandla
Umthamo wokusebenza ngegamatage	24VDC
Ukusebenza ivoltage	20.4 ÷ 28.8VDC
Ubuninzi bokusetyenziswa kwangoku	150mA @ 24VDC
Uxilongo (0)	Inqanaba lobonelelo: Eliqhelekileyo / liphantsi okanye elilahlekileyo.
IO/COM Ibhasi
Ukusetyenziswa kwebhasi yangoku	70mA ubuninzi
Iimpawu ze-LED
Ii-LED zemveliso			Bomvu		Vula: Vula iSekethe (xa imiselwe kwimo yangoku)
Imeko ye-LED			Umbala wesithathu we-LED. Iimpawu zezi zilandelayo:
			Umbala		Umbuso we-LED			Ubume
			Luhlaza		On			Ukusebenza ngokuqhelekileyo
					Ukuqhwanyaza kancinci			Bhuqa
					Ukuqhwanyaza ngokukhawuleza			Ukuqaliswa kwe-OS
			Luhlaza/Bomvu		Ukuqhwanyaza kancinci			Ukungafani kobumbeko
			Bomvu		On			Ukubonelela ngevoltagi-e iphantsi okanye ayikho
					Ukuqhwanyaza kancinci			Akukho tshintshiselwano lwe-IO
					Ukuqhwanyaza ngokukhawuleza			Impazamo yonxibelelwano
			Orenji		Ukuqhwanyaza ngokukhawuleza			Uphuculo lwe-OS
Okusingqongileyo
Ukhuseleko		IP20, NEMA1
Ubushushu bokusebenza		-20°C ukuya ku-55°C (-4°F ukuya ku-131°F)
Ubushushu bokugcina		-30°C ukuya ku-70°C (-22°F ukuya ku-158°F)
Ukufuma okuzalanayo (RH)		5% ukuya kwi-95% (engacondensing)
Ukuphakama kokusebenza		2,000 m (6,562 ft)
Umothuko		IEC 60068-2-27, 15G, 11ms ubude bexesha
Ukungcangcazela		IEC 60068-2-6, 5Hz ukuya 8.4Hz, 3.5mm rhoqo amplitude, 8.4Hz ukuya 150Hz, 1G isantya
Imilinganiselo
Ubunzima		0.17 kg (0.375 lb)
Ubungakanani		Jonga kwimifanekiso engezantsi

DIMENSION

Amanqaku: 

1. I-UIA-0006 iya kukwazi ukuvelisa amaxabiso afikelela kwi-1.5% ephezulu kunoluhlu lwemveliso yesiqhelo (Output Over-range).
2. Jonga iZalathisi ze-LED kwiTheyibhile engentla ngenkcazo yezalathisi ezifanelekileyo. Qaphela ukuba iziphumo zoxilongo zikwabonisiwe kwisistim tags kwaye inokubonwa nge-UniApps™ okanye imo ye-intanethi ye-UniLogic™.

Ulwazi olukolu xwebhu lubonisa iimveliso ngomhla wokushicilela. I-Unitronics inelungelo, ngokuxhomekeke kuyo yonke imithetho esebenzayo, nangaliphi na ixesha, ngokubona kwayo, kwaye ngaphandle kwesaziso, ukuyeka okanye ukutshintsha iimpawu, ukuyila, izixhobo kunye nezinye iinkcukacha zeemveliso zayo, kwaye mhlawumbi ngokusisigxina okanye okwethutyana Ukushiya kwimarike.
Lonke ulwazi kolu xwebhu lunikelwe “njengoko lunjalo” ngaphandle kwewaranti yalo naluphi na uhlobo, nokuba ichaziwe okanye ichaziwe, kuquka kodwa ingaphelelanga kuzo naziphi na iziqinisekiso ezichaziweyo zokurhwebelana, ukufaneleka kwenjongo ethile, okanye ukungophulwa komthetho. I-Unitronics ayithathi xanduva ngeempazamo okanye ukushiyeka kulwazi olunikwe kolu xwebhu. Akukho siganeko siya kuba noxanduva lwawo nawuphi na umonakalo okhethekileyo, ongalindelekanga, ongathanga ngqo okanye olandelelweyo walo naluphi na uhlobo, okanye nawuphina umonakalo onokuthi uvele ngenxa okanye ngokunxulumene nokusetyenziswa okanye ukwenziwa kolu lwazi.
Amagama orhwebo, iimpawu zentengiso, iilogo kunye neempawu zenkonzo ezithiwe thaca kolu xwebhu, kubandakanywa noyilo lwazo, ziyipropathi ye-Unitronics (1989) (R”G) Ltd. okanye amanye amaqela esithathu kwaye akuvumelekanga ukuzisebenzisa ngaphandle kwemvume ebhaliweyo kwangaphambili. yeUnitronics okanye umntu wesithathu onokuba ngabanini bazo.
UG_UIA-0006.pdf 09/22

Amaxwebhu / Izibonelelo

UNITRONICS UIA-0006 Uni-Input-Output Module [pdf] Isikhokelo somsebenzisi UIA-0006 Uni-Input-Output Module, UIA-0006, Uni-Input-Output Module, Igalelo-Ioutput Module, Imodyuli yokuPhuma, imodyuli

Iimbekiselo

• Incwadi yokusebenzisa