UNITRONICS UIA-0006 Uni-Input-Fitarwa Module

Bayanin samfur

Tsarin Uni-I/OTM dangi ne na kayan shigar da bayanai / fitarwa waɗanda suka dace da dandalin sarrafa UniStreamTM. An ƙera shi don yin aiki tare da masu kula da CPU, bangarorin HMI, da na'urorin I/O na gida don samar da duk-in-one Mai sarrafa dabaru (PLC). Tsarin UIA-0006 ƙayyadaddun tsari ɗaya ne a cikin wannan iyali kuma wannan jagorar tana ba da ainihin bayanan shigarwa don sa. Ana iya zazzage ƙayyadaddun fasaha don samfuran Uni-I/OTM daga Unitronics website.

Umarnin Amfani da samfur

Don shigar da kayan aikin Uni-I/OTM, bi waɗannan matakan:

1. A bayan kowane UniStreamTM HMI Panel wanda ya ƙunshi CPU-for-Panel.
2. A kan hanyar dogo ta DIN, ta amfani da Kit ɗin Faɗaɗɗen Gida.

Matsakaicin adadin samfuran Uni-I/OTM waɗanda za a iya haɗa su da mai sarrafa CPU guda ɗaya yana iyakance. Don cikakkun bayanai kan ƙayyadaddun iyakoki, da fatan za a duba ƙayyadaddun takaddun na UniStreamTM CPU ko kowane kayan Faɗawa na Gida mai dacewa.

Kafin Ka Fara
Kafin shigar da na'urar, mai sakawa dole ne:

• Karanta kuma ku fahimci jagorar mai amfani.
• Tabbatar da abinda ke cikin kit.

Bukatun Zabin Shigarwa
Idan kana shigar da tsarin Uni-I/OTM akan:

• Ƙungiyar UniStreamTM HMI: Kwamitin dole ne ya ƙunshi CPU-for-Panel, wanda aka shigar bisa ga jagorar shigarwa na CPU-for-Panel.
• DIN-dogon: Dole ne ku yi amfani da Kit ɗin Faɗaɗɗen Gida, samuwa ta hanyar tsari daban-daban, don haɗa nau'ikan Uni-I/OTM akan DIN-dogon cikin tsarin sarrafa UniStreamTM.

Alamar Faɗakarwa da Ƙuntatawa Gabaɗaya
Lokacin da ɗaya daga cikin alamomin masu zuwa ya bayyana, karanta bayanan haɗin gwiwa a hankali:

Alama	Ma'ana	Bayani
hadari	Hadarin da aka gano yana haifar da lalacewar jiki da ta dukiya.
Gargadi	Hatsarin da aka gano zai iya haifar da jiki da dukiya lalacewa.
Tsanaki	Yi amfani da hankali.

Duk examples da zane-zane da aka bayar a cikin jagorar mai amfani an yi su ne don taimakawa fahimta kuma ba su da garantin aiki. Unitronics ba ya karɓar alhakin ainihin amfani da wannan samfurin bisa waɗannan tsoffinamples. Da fatan za a zubar da wannan samfurin bisa ga ƙa'idodi da ƙa'idodi na gida da na ƙasa. Ya kamata a shigar da wannan samfurin ta ƙwararrun ma'aikata kawai. Rashin bin ƙa'idodin aminci masu dacewa na iya haifar da mummunan rauni ko lalacewar dukiya. Kada kayi ƙoƙarin amfani da wannan na'urar tare da sigogi waɗanda suka wuce matakan halatta. Kar a haɗa/ cire haɗin na'urar lokacin da wuta ke kunne.

La'akarin Muhalli
Yi la'akari da waɗannan lokacin shigar da tsarin Uni-I/OTM:

• Samun iska: Ana buƙatar 10mm (0.4) na sarari tsakanin saman na'urar / gefuna na ƙasa da bangon shinge.
• Kada a shigar a cikin wuraren da: ƙura mai wuce kima ko mai ɗaukar nauyi, iskar gas ko mai ƙonewa, danshi ko ruwan sama, zafi mai yawa, girgiza ta yau da kullun ko firgita mai wuce kima, daidai da ƙa'idodi da iyakoki da aka bayar a cikin takaddar ƙayyadaddun samfur.
• Kada a sanya a cikin ruwa ko barin ruwa ya zubo kan naúrar.
• Kada ka bari tarkace su fada cikin naúrar yayin shigarwa.
• Sanya a matsakaicin nisa daga babban-voltage igiyoyi da kayan wuta.

Abubuwan da ke cikin Kit

• 1 UIA-0006
• 4 I/O tasha tubalan (2 baki da 2 launin toka)
• 1 DIN-dogon shirye-shiryen bidiyo - Ba da goyan bayan jiki don CPU da kayayyaki. Akwai shirye-shiryen bidiyo guda biyu: ɗaya a saman (an nuna), ɗaya a ƙasa (ba a nuna ba).
• 2 Fitowa 0-1 - Abubuwan haɗin da aka fitar
• 1 Fitowa 2

Uni-I/O™ dangi ne na kayan shigar da kayan sarrafawa/fitarwa waɗanda suka dace da dandalin sarrafa UniStream™. Wannan jagorar tana ba da bayanan shigarwa na asali don ƙirar UIA-0006.
Ana iya sauke ƙayyadaddun fasaha daga Unitronics website.
Dandalin UniStream™ ya ƙunshi masu kula da CPU, bangarorin HMI, da na'urorin I/O na gida waɗanda ke haɗuwa tare don samar da mai sarrafa dabaru na gaba ɗaya (PLC).
Shigar da kayan aikin Uni-I/O™:

• A bayan kowane UniStream™ HMI Panel wanda ya ƙunshi CPU-for-Panel.
• A kan hanyar dogo ta DIN, ta amfani da Kit ɗin Faɗaɗɗen Gida.

Matsakaicin adadin abubuwan Uni-I/O™ waɗanda za a iya haɗa su da mai sarrafa CPU guda ɗaya yana iyakance. Don cikakkun bayanai, da fatan za a koma zuwa ƙayyadaddun takaddun UniStream™ CPU ko kowane kayan Faɗawa na Gida mai dacewa.

Kafin Ka Fara

Kafin shigar da na'urar, mai sakawa dole ne:

• Karanta kuma ku fahimci wannan takarda.
  • Tabbatar da Abubuwan da ke cikin Kit.

Bukatun zaɓin shigarwa
Idan kana shigar da tsarin Uni-I/O™ akan:

• Ƙungiyar UniStream™ HMI; Dole ne kwamitin ya ƙunshi CPU-don-Panel, wanda aka shigar bisa ga jagorar shigarwa na CPU-don-Panel.
  • A DIN-rail; Dole ne ku yi amfani da Kit ɗin Faɗawa Na Gida, wanda ake samu ta tsari daban, don haɗa samfuran Uni-I/O™ akan layin dogo na UniStream™ zuwa tsarin sarrafa UniStream™.

Alamar Faɗakarwa da Ƙuntatawa Gabaɗaya
Lokacin da ɗayan waɗannan alamomin suka bayyana, karanta bayanan haɗin gwiwa a hankali.

• Duk examples da zane-zane an yi nufin su taimaka fahimta, kuma ba su da garantin aiki. Unitronics ba ta karɓar alhakin ainihin amfani da wannan samfurin bisa waɗannan tsoffinamples.
• Da fatan za a zubar da wannan samfurin bisa ga ƙa'idodi da ƙa'idodi na gida da na ƙasa.
• ƙwararrun ma'aikata kawai ya kamata a shigar da wannan samfurin.
• Rashin bin ƙa'idodin tsaro masu dacewa na iya haifar da mummunan rauni ko lalacewar dukiya.
• Kada kayi ƙoƙarin amfani da wannan na'urar tare da sigogi waɗanda suka wuce matakan izini.
• Kar a haɗa/ cire haɗin na'urar lokacin da wuta ke kunne.

La'akarin Muhalli 

• Samun iska: 10mm (0.4”) na sarari ana buƙatar tsakanin saman na'urar / gefuna na ƙasa da bangon shinge.
• Kada a shigar a cikin wuraren da: ƙura mai wuce kima ko mai ɗaukar nauyi, iskar gas ko mai ƙonewa, danshi ko ruwan sama, zafi mai yawa, girgiza ta yau da kullun ko firgita mai wuce kima, daidai da ƙa'idodi da iyakoki da aka bayar a cikin takaddar ƙayyadaddun samfur.
• Kada a sanya a cikin ruwa ko barin ruwa ya zubo kan naúrar.
• Kada ka bari tarkace su fada cikin naúrar yayin shigarwa.
• Sanya a matsakaicin nisa daga babban-voltage igiyoyi da kayan wuta.

Abubuwan da ke cikin Kit

• 1 UIA-0006
• 4 I/O tasha tubalan (2 baki da 2 launin toka)

Tsarin UIA-0006

1	DIN-rail shirye-shiryen bidiyo	Bayar da goyan bayan jiki don CPU da kayayyaki. Akwai shirye-shiryen bidiyo guda biyu: ɗaya a saman (an nuna), ɗaya a ƙasa (ba a nuna ba).
2	Fitowa 0-1	Abubuwan haɗin da aka fitar
3	Fitarwa 2
4	Bas na I/O - Hagu	Haɗin Hagu
5	Kulle Mai Haɗin Bas	Zamar da Makullin Haɗin Bus zuwa hagu, don haɗa na'urar Uni- I/O™ ta hanyar lantarki zuwa CPU ko ma'aunin kusa.
6	I/O Bas - Dama	Mai Haɗin Gefen Dama, an yi jigilar kaya a rufe. Bar rufe lokacin da ba a amfani da shi.
	Murfin Haɗin Bas
7	Fitowa 4-5	Abubuwan haɗin da aka fitar
8	Fitarwa 3
9	Fitar LEDs 3-5	Red LEDs
10	Fitar LEDs 0-2	Red LEDs
11	Matsayin LED	Tricolor LED, Green/Ja/Orange

NOTE
Koma zuwa takaddun ƙayyadaddun module don alamun LED.

12	Ƙofar Module	An yi jigilar kaya an lulluɓe da tef ɗin kariya don hana kofa kofa. Cire tef yayin shigarwa.
13	Matsakaicin ramuka	Kunna panel-hawan; rami diamita: 4mm (0.15").

Masu haɗin Bus na I/O suna ba da wuraren haɗin jiki da na lantarki tsakanin kayayyaki. Ana jigilar mai haɗawa da murfin kariya, yana kare mai haɗawa daga tarkace, lalacewa, da ESD.
Bus na I/O - Hagu (# 4 a zane) ana iya haɗa shi zuwa ko dai CPU-for-Panel, tsarin Uni-COM ™, zuwa wani tsarin Uni-I/O ™ ko zuwa Ƙarshen Ƙarshen Fadada Gida. Kit.
Bas ɗin I/O - Dama (#6 a cikin zane) ana iya haɗa shi zuwa wani tsarin I/O, ko zuwa Rukunin Tushe na Kit ɗin Faɗawar Gida.

Tsanaki

• Kashe wutar tsarin kafin haɗi ko cire haɗin kowane kayayyaki ko na'urori.
• Yi amfani da matakan da suka dace don hana Electro-Static Discharge (ESD).

Shigar da Module Uni-I/O™ akan UniStream™ HMI Panel
NOTE Tsarin nau'in dogo na DIN a bayan kwamitin yana ba da goyan bayan jiki don ƙirar Uni-I/O™.

1. Bincika sashin da zaku haɗa tsarin Uni-I/O™ don tabbatar da cewa ba a rufe Haɗin Bus ɗin sa. Idan tsarin Uni-I/O™ zai zama na ƙarshe a cikin tsarin, kar a cire murfin mai Haɗin Bus ɗin sa na I/O - Dama.
2. Bude ƙofar Uni-I/O™ module kuma riƙe shi kamar yadda aka nuna a hoton da ke biye.
3. Yi amfani da ramukan jagora na sama da na ƙasa (harshe & tsagi) don zamewa Uni-I/O™ module zuwa wuri.
4. Tabbatar cewa shirye-shiryen bidiyo na DIN-dogon da ke sama da kasa na tsarin Uni-I/O™ sun tsinci kan DIN-dogon.
   
5. Zamar da Makullin Haɗin Bus har zuwa hagu kamar yadda aka nuna a hoton da ke gaba.
6. Idan akwai rigar tsarin da ke hannun dama, kammala haɗin gwiwa ta hanyar zamewa makullin Haɗin Bus na sashin da ke kusa zuwa hagu.
7. Idan tsarin shine na ƙarshe a cikin daidaitawa, bar mai haɗin bas na I/O an rufe shi.
   Cire Module 
8. Kashe wutar tsarin.
9. Cire haɗin tashoshin I/O (#2,3,7,8 a cikin zane).
10. Cire haɗin tsarin Uni-I/O™ daga raka'o'in da ke kusa: zame Makullin Haɗin Bus ɗin sa zuwa dama. Idan akwai naúrar da ke hannun dama, zame mukullin wannan tsarin zuwa dama shima.
11. A kan tsarin Uni-I/O™, ja babban shirin DIN-dogon sama da shirin ƙasa.
12. Bude ƙofar Uni-I/O™ kuma riƙe ta da yatsu biyu kamar yadda aka nuna a cikin adadi a shafi na 3; sannan a janye shi daga inda yake.

Shigar da kayan aikin Uni-I/O™ akan hanyar dogo ta DIN 

Don hawan kayayyaki akan DIN-dogo, bi matakai 1-7 inci
Shigar da Module Uni-I/O™ akan UniStream™ HMI Panel.
Domin haɗa samfuran zuwa mai sarrafa UniStream™, dole ne ku yi amfani da Kit ɗin Faɗawa na Gida.
Ana samun waɗannan kayan aikin tare da ba tare da samar da wutar lantarki ba, kuma tare da igiyoyi masu tsayi daban-daban. Don cikakkun bayanai, da fatan za a koma zuwa jagorar shigarwa na Kit ɗin Faɗawar Gida mai dacewa.

Modulolin Lambobi
Kuna iya ƙididdige ƙididdiga don dalilai na tunani. An samar da saitin lambobi 20 tare da kowane CPU-for-Panel; yi amfani da waɗannan lambobi don ƙididdige samfuran.

• Saitin ya ƙunshi lambobi da lambobi marasa komai kamar yadda aka nuna a adadi na hagu.
• Sanya su a kan kayayyaki kamar yadda aka nuna a cikin adadi a dama.

Farashin UL

Sashe mai zuwa ya dace da samfuran Unitronics waɗanda aka jera tare da UL.
Samfura masu zuwa: UIA-0006, UID-0808R, UID-W1616R,UIS-WCB1 UL an jera su don Wurare masu haɗari. Samfura masu zuwa: UIA-0006, UIA-0402N, UIA-0402NL, UIA-0800N, UID-0016R, UID-0016RL,
UID-0016T, UID-0808R, UID-0808RL, UID-0808T, UID-0808THS, UID-0808THSL, UID-0808TL, UID-1600, UID-1600L, UID-W1616R, UID-UPTIS 1616PTN, UIS-04TC, UIS-WCB04, UIS-WCB08
an jera UL don Wuri na Musamman.

Ƙididdigar UL, Masu Gudanar da Shirye-shiryen don Amfani a Wurare masu Haɗari, Class I, Division 2, Rukunin A, B, C da D
Waɗannan Bayanan Bayanin Sakin suna da alaƙa da duk samfuran Unitronics waɗanda ke ɗauke da alamun UL da aka yi amfani da su don yiwa samfuran da aka yarda don amfani a wurare masu haɗari, Class I, Division 2, Rukunin A, B, C da D.

Tsanaki 

•  Wannan kayan aikin ya dace don amfani a cikin Class I, Division 2, Rukunin A, B, C da D, ko wuraren da ba masu haɗari kawai.
• Wayoyin shigarwa da fitarwa dole ne su kasance daidai da Class I, hanyoyin wayoyi na Division 2 kuma daidai da ikon da ke da iko.
• GARGADI — Fashewa Hazard-masanin abubuwan da aka gyara na iya lalata dacewa ga Class I, Division 2.
• GARGADI – HAZARAR FASHE – Kar a haɗa ko cire haɗin kayan aiki sai dai idan an kashe wuta ko kuma an san wurin ba shi da haɗari.
• GARGADI - Bayyanawa ga wasu sinadarai na iya lalata kaddarorin rufe kayan da ake amfani da su a Relays.
• Dole ne a shigar da wannan kayan aikin ta hanyar amfani da hanyoyin wayoyi kamar yadda ake buƙata don Class I, Division 2 kamar yadda NEC da/ko CEC ke buƙata.

Waya 

• An tsara wannan kayan aikin don yin aiki kawai a SELV/PELV/Class 2/ Iyakantaccen Wutar Wuta.
• Duk kayan wutar lantarki a cikin tsarin dole ne su haɗa da rufi biyu. Dole ne a ƙididdige abubuwan samar da wutar lantarki azaman SELV/PELV/Class 2/Iyakantaccen Ƙarfi.
• Kar a haɗa siginar 'Neutral' ko 'Layi' na 110/220VAC zuwa wurin 0V na na'urar.
• Kar a taɓa wayoyi masu rai.
• Duk ayyukan wayoyi yakamata a yi su yayin da wuta ke KASHE.
• Yi amfani da kariya ta yau da kullun, kamar fuse ko mai watsewar kewayawa, don guje wa wuce gona da iri zuwa tashar samar da kayayyaki UIA-0006.
• Ba za a haɗa wuraren da ba a yi amfani da su ba (sai dai idan an ƙayyade). Yin watsi da wannan umarnin na iya lalata na'urar.
• Bincika duk wayoyi sau biyu kafin kunna wutar lantarki.

Tsanaki 

• Don guje wa lalata waya, yi amfani da matsakaicin karfin juyi na 0.5 N·m (5 kgf·cm).
• Kada a yi amfani da gwano, solder, ko wani abu akan fitaccen waya wanda zai iya sa igiyar waya ta karye.
• Sanya a matsakaicin nisa daga babban-voltage igiyoyi da kayan wuta.

Tsarin Waya
Yi amfani da crimp tashoshi don wayoyi; amfani da 26-12 AWG waya (0.13 mm2 -3.31 mm2).

1. Cire waya zuwa tsayin 7± 0.5mm (0.250-0.300 inci).
2. Cire tashar zuwa mafi girman matsayi kafin saka waya.
3. Saka waya gaba daya a cikin tashar don tabbatar da haɗin kai mai kyau.
4. Maƙarƙashiya don kiyaye waya daga ja kyauta.

UIA-0006 Abubuwan Haɗi
Duk zane-zane na wayoyi da umarni a cikin wannan takarda suna komawa zuwa wuraren haɗin UIA-0006.
An tsara waɗannan maki a rukuni huɗu na maki 7 kamar yadda aka nuna a cikin adadi a dama.

Manyan kungiyoyi biyu
Abubuwan haɗin kai

Ƙungiyoyin ƙasa biyu
Abubuwan da aka fitar da wuraren haɗin wutar lantarki

Ka'idojin Waya
Domin tabbatar da cewa na'urar za ta yi aiki yadda ya kamata da kuma guje wa tsangwama na lantarki:

• Yi amfani da kabad ɗin ƙarfe. Tabbatar cewa majalisar ministoci da kofofinta suna da ƙasa yadda ya kamata.
• Yi amfani da wayoyi waɗanda girmansu ya dace don kaya.
• Yi amfani da igiyoyi masu murɗaɗɗen garkuwa don haɗa siginar I/O Analog; kar a yi amfani da garkuwar kebul azaman sigina gama gari (CM) / hanyar dawowa.
• Hanya kowace siginar I/O tare da keɓewar waya ta gama gari. Haɗa wayoyi gama-gari a maki na gama-gari (CM) a tsarin I/O.
• Haɗa kowane maki 0V da kowane ma'ana gama gari (CM) a cikin tsarin zuwa tashar wutar lantarki ta 0V, sai dai in an ƙayyade.
• Kai ɗaya haɗa kowane madaidaicin ƙasa mai aiki ( ) zuwa ƙasan tsarin (zai fi dacewa zuwa chassis ɗin ƙarfe).
  Yi amfani da wayoyi mafi guntu kuma mafi kauri mai yuwuwa: ƙasa da 1m (3.3') tsayi, ƙaramin kauri 14 AWG (2 mm2).
• Haɗa wutar lantarki 0V zuwa ƙasa na tsarin.
  Ƙaddamar da garkuwar igiyoyi:
  • Haɗa garkuwar kebul zuwa ƙasan tsarin - zai fi dacewa zuwa chassis ɗin ƙarfe na ƙarfe. Lura cewa dole ne a haɗa garkuwar a ɗaya ƙarshen kebul; yawanci, ƙaddamar da garkuwar a ƙarshen UIA-0006 yana aiki mafi kyau.
  • Rike haɗin garkuwa gajarta sosai.
  • Tabbatar da ci gaban garkuwa lokacin da ke shimfida igiyoyin kariya.

NOTE 

• Don cikakkun bayanai, koma zuwa daftarin Jagororin Waya Waya, wanda ke cikin Laburaren Fasaha a cikin Unitronics' website.

Wayar da Wutar Lantarki
Wannan tsarin yana buƙatar wutar lantarki ta 24VDC ta waje.

• A cikin lamarin voltage sauye-sauye ko rashin daidaituwa ga voltage Ƙayyadaddun wutar lantarki, haɗa na'urar zuwa tsarin samar da wutar lantarki.

Haɗa tashoshi na 24V da 0V kamar yadda aka nuna a hoton da ke gaba.

Wayar da abubuwan Analog 

NOTE

• Kowane fitarwa yana ba da hanyoyi biyu: voltage ko halin yanzu. Kuna iya saita kowace fitarwa da kanta. An ƙayyade yanayin duka ta hanyar wayoyi da kuma ta hanyar daidaitawar hardware a cikin aikace-aikacen software.
• Voltage da kuma yanayin yanzu suna amfani da maki daban-daban. Haɗa kawai wurin da ke da alaƙa da yanayin da aka zaɓa; bar sauran batu ba tare da haɗi ba.
• Kowane fitarwa yana da nasa ma'ana gama gari (CM0 don O0 da sauransu). Haɗa kowane fitarwa na analog ta amfani da madaidaicin wurin CM.
  • Kar a haɗa wurin gama gari (CM) zuwa wurin 0V.
• Kar a yi amfani da wuraren gama-gari (CM) don kowace manufa banda haɗa nauyin fitarwa na analog. Yin amfani da su don kowane dalili na iya lalata tsarin.

 

Ƙididdiga na Fasaha

Wannan jagorar tana ba da ƙayyadaddun bayanai don Unitronics'Uni-I/O™ module UIA-0006. Wannan module ya ƙunshi:

• 6 fitowar analog, 13/14 bit

Samfuran Uni-I/O sun dace da dangin UniStream™ na Masu Gudanar da Logic Promable. Za a iya ko dai a ɗora su a baya na UniStream ™ HMI Panel kusa da CPU-for-Panel don ƙirƙirar mai sarrafa HMI + PLC gabaɗaya, ko sanya su akan daidaitaccen DIN Rail ta amfani da Adaftan Faɗawa na gida.
Ana samun Jagoran shigarwa a cikin Laburaren Fasaha na Unitronic a www.unitronics.com

Abubuwan Analog
Yawan abubuwan da aka fitar				6
Kewayon fitarwa (1Kuskure! Ba a samo asalin bayanin ba.)				Fitowa Nau'in		Dabi'u Mara Lafiya	Ƙimar sama-sama		Ƙimar Ƙarfafawa
				0÷10VDC		0≤Vout≤10VDC	10		Wuta> 10.15VDC
				-10-10VDC		-10≤Vout≤10VDC	-10.15£Vout <-10VDC 10		Zazzagewa <-10.15VDC Vout>10.15VDC
				0÷20mA		0≤Iout≤20mA	20≤Iout≤20.3mA		Iout> 20.3mA
				4÷20mA		4≤Iout≤20mA	20≤Iout≤20.3mA		Iout> 20.3mA
Kadaici voltage
Fitowa zuwa bas				500 VAC na minti 1
Fitowa zuwa fitarwa				Babu
Fitar da wutar lantarki zuwa bas				500 VAC na minti 1
Fitar da wutar lantarki zuwa fitarwa				Babu
Ƙaddamarwa				0 ÷ 10VDC - 14 bit -10 ÷ 10VDC - 13 bit + alamar 0 ÷ 20mA - 13 bit 4 ÷ 20mA - 13 bit
Daidaito (25°C/-20°C zuwa 55°C)				± 0.3% / ± 0.5% na cikakken sikelin (Voltage) ± 0.5% / ± 0.7% na cikakken sikelin (Yanzu)
Load impedance				Voltage - 2kΩ mafi ƙarancin A halin yanzu - 600Ω iyakar
Lokacin daidaitawa (95% na sabon ƙima)				0 ÷ 10VDC – 1.8ms (2kΩ juriya lodi), 3.7ms (2kΩ + 1uF lodi) -10 ÷ 10VDC - 3ms (2kΩ juriya lodi), 5.5ms (2kΩ + 1uF lodi) 0 ÷ 20mA da 4 ÷ 20mA - 1.7ms (nauyin 600Ω), 1.7ms (600Ω + 10mH lodi)
Kebul				Garkuwar murƙushe biyu
Diagnostics (0)				Voltage – Abubuwan da aka fitar suna gajeriyar kariya amma babu alamar software a halin yanzu - Buɗe nunin kewayawa
Tushen wutan lantarki
Sunan aiki voltage	Saukewa: 24VDC
Ƙa'idar aikitage	20.4 ÷ 28.8VDC
Matsakaicin amfani na yanzu	150mA @ 24VDC
Diagnostics (0)	Matakan samarwa: Na al'ada/Ƙasashe ko ɓacewa.
IO/COM bas
Amfanin bas na yanzu	70mA mafi girma
Alamar LED
Fitilun fitarwa			Ja		Kunna: Buɗe Circuit (lokacin da aka saita zuwa Yanayin Yanzu)
Matsayin LED			LED mai launi uku. Alamu kamar haka:
			Launi		Jihar LED			Matsayi
			Kore		On			Aiki kullum
					Sannu a hankali			Boot
					Kiftawar ido			Farkon OS
			Kore/Ja		Sannu a hankali			Rashin daidaitawa
			Ja		On			Ƙarar voltage yana da ƙasa ko bace
					Sannu a hankali			Babu musayar IO
					Kiftawar ido			Kuskuren sadarwa
			Lemu		Rapid lumshe ido			Haɓaka OS
Muhalli
Kariya		IP20, NEMA1
Yanayin aiki		-20°C zuwa 55°C (-4°F zuwa 131°F)
Yanayin ajiya		-30°C zuwa 70°C (-22°F zuwa 158°F)
Dangantakar Humidity (RH)		5% zuwa 95% (ba mai tauri)
Tsayin aiki		2,000m (6,562 ft)
Girgiza kai		IEC 60068-2-27, 15G, tsawon 11ms
Jijjiga		IEC 60068-2-6, 5Hz zuwa 8.4Hz, 3.5mm akai-akai amplitude, 8.4Hz zuwa 150Hz, 1G hanzari
Girma
Nauyi		0.17 Kg (0.375 laba)
Girman		Koma zuwa hotunan da ke ƙasa

GIRMA

Bayanan kula: 

1. UIA-0006 za ta iya fitar da kimar da ta kai har zuwa 1.5% sama da kewayon fitarwa na ƙima (Fitowa Over-keway).
2. Dubi Tebur Alamar LED da ke sama don kwatancen alamun da suka dace. Lura cewa ana kuma nuna sakamakon binciken a cikin tsarin tags kuma ana iya lura da su ta hanyar UniApps™ ko yanayin kan layi na UniLogic™.

Bayanan da ke cikin wannan takarda yana nuna samfurori a ranar bugawa. Unitronics yana da haƙƙi, ƙarƙashin duk dokokin da suka dace, a kowane lokaci, bisa ga ra'ayin sa, kuma ba tare da sanarwa ba, don dakatarwa ko canza fasali, ƙira, kayan aiki da sauran ƙayyadaddun samfuransa, da kuma ko dai na dindindin ko na ɗan lokaci janye kowane daga cikinsu. da forgoing daga kasuwa.
Duk bayanan da ke cikin wannan takarda an bayar da su “kamar yadda yake” ba tare da garanti na kowane iri ba, ko dai bayyanawa ko bayyananne, gami da amma ba'a iyakance ga kowane garanti na kasuwanci ba, dacewa don wata manufa, ko rashin cin zarafi. Unitronics ba shi da alhakin kurakurai ko rashi a cikin bayanan da aka gabatar a cikin wannan takaddar. Babu wani yanayi da Unitronics zai zama abin dogaro ga kowane na musamman, na bazata, kaikaice ko lahani na kowane iri, ko duk wani lahani da ya taso daga ko dangane da amfani ko aikin wannan bayanin.
Sunayen kasuwanci, alamun kasuwanci, tambura da alamun sabis da aka gabatar a cikin wannan takaddar, gami da ƙirar su, mallakar Unitronics (1989) (R”G) Ltd. ko wasu ɓangarori na uku kuma ba a ba ku izinin amfani da su ba tare da rubutaccen izini na farko ba. na Unitronics ko wani ɓangare na uku wanda zai iya mallake su.
UG_UIA-0006.pdf 09/22

Takardu / Albarkatu

UNITRONICS UIA-0006 Uni-Input-Fitarwa Module [pdf] Jagorar mai amfani UIA-0006 Uni-Input-Output Module, UIA-0006, Uni-Input-Fitarwa Module.

Magana

• Manual mai amfani