SMARTEH LPC-2.DB2 Longo Programmable Controller Debug Modyuli

FAQ

Imibuzo ebuzwa qho

• Q: Ingaba imodyuli yolungiso ye-LPC-2.DB2 ingasetyenziswa kunye nezinye iimodeli zolawulo?
  • A: I-LPC-2.DB2 yenzelwe ngokukodwa ukusetyenziswa kunye neemodyuli ze-LPC-2.main kunye neetheminali ezithile zabaqhubi njengoko zidweliswe kwinkcazo. Kucetyiswa ukuba ubhekisele kwincwadana yemveliso ngolwazi oluhambelanayo.
• Q: Kufuneka ndenze ntoni ukuba ii-LED zoxilongo zibonisa iipatheni ezingaqhelekanga?
  • A: Ukuba ii-LED zokuxilonga zibonakalisa iipatheni ezingaqhelekanga okanye zingabonakali ukusebenza okuqhelekileyo, jonga uxhulumaniso kwaye uqinisekise ukufakwa okufanelekileyo ngokwezicwangciso zoxhumo olunikezelweyo kwincwadana.

IMIGANGATHO NEMIGAQO

Imigangatho, iingcebiso, imimiselo kunye nemimiselo yelizwe apho izixhobo ziya kusebenza khona, kufuneka ziqwalaselwe ngelixa ucwangcisa nokuseka izixhobo zombane. Sebenza kwi-100 .. I-240 V inethiwekhi ye-AC ivunyelwe kubasebenzi abagunyazisiweyo kuphela.

IZILUMKISO NGENGOZI: Izixhobo okanye iimodyuli kufuneka zikhuselwe kumswakama, ukungcola kunye nomonakalo ngexesha lokuthutha, ukugcinwa kunye nokusebenza.

IMIQATHANGO YEWARANTI

IMIQATHANGO YEWARANTI: Kuzo zonke iimodyuli ze-LONGO LPC-2 - ukuba akukho tshintsho lwenziwayo kwaye ludityaniswe ngokuchanekileyo ngabasebenzi abagunyazisiweyo - ngokuqwalasela ubuninzi obuvumelekileyo bokudibanisa amandla, iwaranti yeenyanga ze-24 isemthethweni ukususela kumhla wokuthengisa ukuya kumthengi wokugqibela, kodwa kungekhona ngaphezu Iinyanga ezingama-36 emva kokunikezelwa kweSmareh. Kwimeko yamabango ngexesha lewaranti, esekelwe kukungasebenzi kakuhle kwezinto umvelisi unikezela ngokutshintshwa kwamahhala.

Indlela yokubuyisela imodyuli engasebenzi kakuhle, kunye nenkcazo, inokulungiswa kunye nommeli wethu ogunyazisiweyo. Iwaranti ayibandakanyi umonakalo ngenxa yokuthutha okanye ngenxa yemimiselo ehambelanayo engaqwalaselwanga yelizwe, apho imodyuli ifakwe khona.

Esi sixhobo kufuneka siqhagamshelwe ngokufanelekileyo ngesikimu soqhagamshelwano esinikiweyo kule ncwadana. Ukungadibanisi kunokubangela umonakalo wesixhobo, umlilo okanye ukwenzakala komntu.
Umthamo onobungozitage kwisixhobo kunokubangela ukothuka kombane kwaye kunokubangela ukwenzakala okanye ukufa komntu.

UNGAZE UYIKHONZE LE MVELISO KWAKHO!

Esi sixhobo akufuneki sifakwe kwiisistim ezibalulekileyo ebomini (umzekelo, izixhobo zonyango, iinqwelo-moya, njl. njl.).

Ukuba isixhobo sisetyenziswe ngendlela engachazwanga ngumenzi, iqondo lokhuseleko olunikezelwa sisixhobo lunokonakala.
Inkunkuma yombane kunye nezixhobo zombane (WEEE) kufuneka ziqokelelwe ngokwahlukeneyo!

I-LONGO LPC-2 ithobela le migangatho ilandelayo:

• I-EMC: EN 61000-6-3: 2007 + A1:2011, EN 61000-6-1:2007, EN 61000-3- 2:2006 + A1:2009 + A2: 2009, EN 61000-3-3:2013
• I-LVD: IEC 61010-1: 2010 (3rd Ed.), IEC 61010-2-201:2013 (1st Ed.)

I-Smarteh doo isebenza ngomgaqo-nkqubo wophuhliso oluqhubekayo.
Ke ngoko sinelungelo lokwenza utshintsho kunye nophuculo kuyo nayiphi na imveliso echazwe kule ncwadana ngaphandle kwesaziso sangaphambili.

UMENZI:

• I-SMARTEH doo
• Poljubinj 114 5220 Tolmin Slovenia

USHWANKATHELO

Ihlelwa ngokolandelelwano lwenkangeleko kuxwebhu:

• I-LED: I-diode ekhupha ukukhanya

INKCAZO

Imodyuli yokulungisa i-LPC-2.DB2 isetyenziselwa ukulungisa iimpazamo ze-LPC-2.imodyuli eziphambili ze-LPC-2.MC9, LPC-2.MM1, LPC-2.MM2, LPC-2.MM3 kunye neeterminals zabaqhubi LPC-3.GOT.111 , LPC-3.GOT.131, LPC-3.GOT.112, LPC-3.GOT.012, LPC-3.GOT.002.

IIMBONAKALO

UKUFAKWA

Iskimu soqhagamshelo example

Uluhlu 2: K1

IBHASI yangaphakathi

Ukudluliselwa kwedatha

Uqhagamshelwano nomlawuli

Uluhlu 3: K2

K2.1	NC	Ayidityaniswanga
K2.2	GND	Umhlaba
K2.3	NC	Ayidityaniswanga
K2.4	Rx ·¬	Idatha ifumana igalelo
K2.5	Tx ·®	Imveliso yokuthumela idatha
K2.6	NC	Ayidityaniswanga

Uluhlu 4: K3

K3.1	VCC	Igalelo lonikezelo lwamandla
K3.2	D-	Idatha-
K3.3	D+	Idatha +
K3.4	ID	Isenokuba N/C, GND okanye isetyenziswe njengesalathisi sobukho besixhobo
		(ibotshelelwe kwi-GND ngesixhasi)
K3.5	GND	Umhlaba

Uluhlu 5: Izixhumi zeadaptha

Uluhlu 6: ii-LEDs

Imiyalelo yokunyuka

• Imilinganiselo kwiimilimitha.

ISILUMKISO: Lonke uqhagamshelo, uncamathiselo lwemodyuli kunye nokudibanisa kufuneka kwenziwe ngelixa imodyuli ingaqhagamshelwanga kubonelelo lwamandla oluphambili.

Ukunyuswa kwemiyalelo yokususa ingxaki:

1. Cima unikezelo lombane oluphambili.
2. Imodyuli ye-Mount LPC-2.DB2 kwindawo ebonelelweyo ngaphakathi kwendawo yombane (DIN EN50022-35 i-rail mounting).
3. Nyusa ezinye iimodyuli ze-LPC-2 (ukuba ziyafuneka). Nyusa imodyuli nganye kuloliwe weDIN kuqala, emva koko uqhoboshele iimodyuli kunye nge K1 kunye ne K2 iziqhagamshelo.
4. Yenza imidibaniso njengomboniso kwizikimu zoqhagamshelo.
5. I-LED1 eluhlaza okwesibhakabhaka kufuneka ilayite.

Ukwehla ngokulandelelana. Ukunyusa/ukwehlisa iimodyuli ukuya/ukusuka kwi-DIN kaloliwe isithuba esikhululekileyo ubuncinane semodyuli enye kufuneka sishiywe kumzila kaloliwe weDIN.

PHAWULA: Imodyuli engundoqo ye-LPC-2 kufuneka inikwe amandla ngokwahlukileyo kwesinye isixhobo sombane esiqhagamshelwe kwinkqubo ye-LPC-2. Iingcingo zomqondiso kufuneka zifakwe ngokwahlukileyo kumandla kunye nevolthi ephezulutagiingcingo ze-e ngokuhambelana nomgangatho wofakelo lombane jikelele.

Ukuleyibhelishwa kweemodyuli

Inkcazo yeleyibhile:

1. XXX-N.ZZZ - igama elipheleleyo lemveliso.
   • XXX-N – Usapho lweMveliso
   • ZZZ - imveliso
2. P/N: AAABBBCCDDDEEE – inxalenye yenombolo.
   • I-AAA - ikhowudi eqhelekileyo yosapho lwemveliso,
   • I-BBB - igama elifutshane lemveliso,
   • I-CCDDDD - ikhowudi yolandelelwano,
     • I-CC - unyaka wokuvulwa kwekhowudi,
     • DDD - ikhowudi yokuphuma,
   • EEE - ikhowudi yoguqulelo (igcinelwe i-HW yexesha elizayo kunye/okanye uphuculo lwe-firmware ye-SW).
3. S/N: SSS-RR-YYXXXXXXXXX – inombolo yothotho.
   • SSS - igama elifutshane lemveliso,
   • RR - ikhowudi yomsebenzisi (inkqubo yovavanyo, umz. Smarteh umntu xxx),
   • YY - unyaka,
   • XXXXXXXXX – inombolo yesitaki yangoku.
4. D/C: WW/YY - ikhowudi yomhla.
   • WW - iveki kunye
   • YY - unyaka wemveliso.

Ukhetho

1. IMAC
2. Iimpawu
3. WAMP
4. Okunye

INGCACISO YOBUGCISA

Uluhlu 7: Iinkcukacha zobugcisa

• Ukunikezwa Amandla ukusuka kwi-USB
• Ukutya umbane 0.5 W
• Uhlobo loqhagamshelo K2 RJ-12 6/4
• Uhlobo loqhagamshelo K3 uhlobo B mini
• Imilinganiselo (L x W x H) 90 x 18 x 60 mm
• Ubunzima 40 g
• Ubushushu obugciniwe 0 ukuya kuma-50 °C
• Ukufuma kwendawo max. 95 %, akukho condensation
• Ukuphakama okuphezulu 2000 m
• Ukuxhoma indawo nkqo
• Ubushushu bokuthutha kunye nokugcinwa -20 ukuya kuma-60 °C
• Isidanga songcoliseko 2
• Iklasi yokhuseleko IP30

IPHATHI EZISECALENI

Ukwenzela ii-odolo zamalungu alandelayo aManani alandelayo kufuneka asetyenziswe:

UTSHINTSHO

Le theyibhile ilandelayo ichaza zonke iinguqu kuxwebhu.

Umhla	V.	Inkcazo
05.06.24	1	Inguqulelo yokuqala, ekhutshwe njenge LPC-2.DB2 Incwadi Yomsebenzisi.

QHAGAMSHELANA

• SMARTEH doo / Poljubinj 114 5220 Tolmin Slovenia
• Umnxeba: +386(0) 388 44 00
• i-imeyile: info@smarteh.si
• www.smarteh.si

Ibhalwe ngu: I-SMARTEH doo
Copyright © 2024, SMARTEH doo

Amaxwebhu / Izibonelelo

SMARTEH LPC-2.DB2 Longo Programmable Controller Debug Modyuli [pdf] Incwadi yokusebenzisa LPC-2.DB2, LPC-2.DB2 Longo Programmable Controller Debug Module, Longo Programmable Controller Debug Module, Programmable Controller Debug Module, Controller Debug Module, Module

Iimbekiselo

• Incwadi yokusebenzisa