SMARTEH LPC-2.DB2 Longo Programmable Controller Debug Module
LBH
Lipotso Tse Botsoang Hangata
- Q: Na mojule oa debug oa LPC-2.DB2 o ka sebelisoa le mefuta e meng ea taolo?
- A: LPC-2.DB2 e etselitsoe ka ho khetheha hore e sebelisoe le LPC-2.main modules le li-terminals tse itseng tsa opereishene joalokaha li thathamisitsoe tlhalosong. Ho kgothaletswa ho bua ka bukana ea lihlahisoa bakeng sa tlhahisoleseding e lumellanang.
- Q: Ke lokela ho etsa eng haeba li-LED tsa tlhahlobo li bontša mekhoa e sa tloaelehang?
- A: Haeba li-LED tsa tlhahlobo li bonts'a lipaterone tse sa tloaelehang kapa li sa bontše ts'ebetso e tloaelehileng, hlahloba likhokahano 'me u netefatse hore ho kentsoe ka nepo ho latela merero ea khokahano e fanoeng bukeng ea tataiso.
LITEKELO LE TSAMAISO
Maemo, likhothaletso, melaoana le lipehelo tsa naha eo lisebelisoa li tla sebetsa ho eona, li tlameha ho nahanoa ha ho etsoa moralo le ho theha lisebelisoa tsa motlakase. Sebetsa ka 100 .. 240 V AC marang-rang a lumelloa ho basebetsi ba nang le tumello feela.
LITEMOSO TSA KOTSI: Lisebelisoa kapa li-module li tlameha ho sireletsoa mongobo, litšila le tšenyo nakong ea lipalangoang, ho boloka le ho sebetsa.
TIISETSO MAEMO
TIISETSO MAEMO: Bakeng sa li-modules tsohle LONGO LPC-2 - haeba ho se na liphetoho tse etsoang holim'a tsona 'me li hokahane ka nepo ke basebetsi ba lumelletsoeng - ho nahanoa ka matla a holimo a lumelletsoeng a ho hokahanya, tiisetso ea likhoeli tse 24 e sebetsa ho tloha ka letsatsi la thekiso ho isa ho moreki oa ho qetela, empa eseng ho feta. Likhoeli tse 36 kamora ho beleha ho tsoa ho Smarteh. Haeba ho na le likopo ka nako ea tiisetso, tse ipapisitseng le ho se sebetse hantle ha thepa, moetsi o fana ka phetisetso ea mahala.
Mokhoa oa ho khutlisa module o sa sebetseng hantle, hammoho le tlhaloso, o ka hlophisoa le moemeli oa rona ea lumelletsoeng. Tiisetso ha e kenyeletse tšenyo e bakoang ke lipalangoang kapa ka lebaka la melaoana e lumellanang e sa nahanoang ea naha, moo module e kenngoa teng.
Sesebediswa sena se tlameha ho hokelwa ka nepo ke sekema sa kgokelo se fanoeng bukeng ena. Ho se hokahane ho ka baka tšenyo ea sesebelisoa, mollo kapa kotsi ea motho.
Voltage ka sesebelisoa e ka baka ts'okelo ea motlakase mme e ka baka kotsi kapa lefu.
LE KA mohla U SE KE UA SEBELETSA SEHLAHISO ENA!
Sesebelisoa sena ha sea lokela ho kenngoa lits'ebetsong tsa bohlokoa bophelong (mohlala, lisebelisoa tsa bongaka, lifofane, joalo-joalo).
Haeba sesebelisoa se sebelisoa ka mokhoa o sa boleloang ke moetsi, tekanyo ea tšireletso e fanoeng ke thepa e ka 'na ea senyeha.
Lisebelisoa tsa motlakase le tsa elektroniki tse litšila (WEEE) li tlameha ho bokelloa ka thoko!
LONGO LPC-2 e latela maemo a latelang:
- EMC: EN 61000-6-3:2007 + A1:2011, EN 61000-6-1:2007, EN 61000-3- 2:2006 + A1:2009 + A2: 2009, EN 61000-3-3:2013
- LVD: IEC 61010-1: 2010 (Mohlophisi oa boraro), IEC 3-61010-2:201 (2013st Ed.)
Smarteh doo e sebetsa leano la nts'etsopele e tsoelang pele.
Ka hona re na le tokelo ea ho etsa liphetoho le lintlafatso ho efe kapa efe ea lihlahisoa tse hlalositsoeng bukeng ena ntle le tsebiso pele.
MOHLAHLISI:
- SMARTEH doo
- Poljubinj 114 5220 Tolmin Slovenia
TS'ELISO TS'OANELO
E hlophisoa ka tatellano ea ponahalo ho tokomane:
- LED: Khanya e ntšang diode
TLHALOSO
LPC-2.DB2 debug module e sebelisetsoa ho lokisa LPC-2.main modules LPC-2.MC9, LPC-2.MM1, LPC-2.MM2, LPC-2.MM3 le li-terminals tsa opareitara LPC-3.GOT.111 , LPC-3.GOT.131, LPC-3.GOT.112, LPC-3.GOT.012, LPC-3.GOT.002.
LIKAROLOANA
KEKETSO
Sekema sa khokahano example
Lethathamo la 2: K1
| BUS ea ka hare | Phetiso ea data | Khokahano ho molaoli |
Lethathamo la 3: K2
| K2.1 | NC | Ha e kopane |
| K2.2 | GND | Fatše |
| K2.3 | NC | Ha e kopane |
| K2.4 | Rx ·¬ | Lintlha li fumana tlhahiso |
| K2.5 | Tx ·® | Tlhahiso ea data |
| K2.6 | NC | Ha e kopane |
Lethathamo la 4: K3
| K3.1 | VCC | Kenyelletso ea phepelo ea motlakase |
| K3.2 | D- | Lintlha - |
| K3.3 | D+ | Lintlha + |
|
K3.4 |
ID |
E ka 'na ea e-ba N/C, GND kapa ea sebelisoa e le sesupo sa boteng ba sesebelisoa se khomaretsoeng |
| (e tlameletsoe ho GND ka mohanyetsi) | ||
| K3.5 | GND | Fatše |
Lethathamo la 5: Lihokelo tsa adaptara
Lethathamo la 6: Li-LED
Litaelo tsa ho kenya
- Litekanyo ka limilimithara.
TLHOKOMELISO: Lihokelo tsohle, li-attachments tsa module le ho kopanngoa li tlameha ho etsoa ha mojule o sa hokeloa phepelong ea mantlha ea motlakase.
Litaelo tsa ho kenya letsoho molemong oa ho lokisa liphoso:
- Tima motlakase oa mantlha.
- Mount LPC-2.DB2 module ho sebaka se fanoeng ka har'a phanele ea motlakase (DIN EN50022-35 rail mounting).
- Hlahisa li-module tse ling tsa LPC-2 (haeba ho hlokahala). Hlomella mojule ka 'ngoe ho seporo sa DIN pele, ebe u kopanya li-module ka lihokelo tsa K1 le K2.
- Etsa likhokahano joalo ka ha li bonts'a mererong ea khokahano.
- Blue LED1 e lokela ho bulela.
Theoha ka tatellano ea morao. Bakeng sa ho kenya / ho theola li-module ho ea ho/ho tloha seporong sa DIN sebaka sa mahala sa bonyane mojule o le mong se tlameha ho sala seporong sa DIN.
HLOKOMELA: Mojule oa mantlha oa LPC-2 o lokela ho tsamaisoa ka thoko ho lisebelisoa tse ling tsa motlakase tse hokahantsoeng le sistimi ea LPC-2. Lithapo tsa matšoao li tlameha ho kenngoa ka thoko ho matla le matla a phahamengtaglithapo tsa e ho latela maemo a kakaretso a ho kenya motlakase indastering.
Ho ngola li-module
Tlhaloso ea Leibole:
- XXX-N.ZZZ - lebitso le felletseng la sehlahisoa.
- XXX-N - Lelapa la lihlahisoa
- ZZZ - sehlahisoa
- P/N: AAABBBCCDDDEEE - nomoro ea karolo.
- AAA - khoutu e akaretsang bakeng sa lelapa la sehlahisoa,
- BBB - lebitso le lekhutšoanyane la sehlahisoa,
- CCDDD - khoutu ea tatelano,
- CC - selemo sa ho bula khoutu,
- DDD - khoutu ea tlhahiso,
- EEE - khoutu ea mofuta (e boloketsoe lintlafatso tsa nakong e tlang tsa HW le/kapa SW).
- S/N: SSS-RR-YYXXXXXXXXX - nomoro ea seriale.
- SSS - lebitso le lekhutšoanyane la sehlahisoa,
- RR - khoutu ea mosebelisi (mokhoa oa tlhahlobo, mohlala, Smarteh person xxx),
- YY - selemo,
- XXXXXXXXX - nomoro ea hajoale ea stack.
- D/C: WW/YY - khoutu ea letsatsi.
- WW - beke le
- YY - selemo sa tlhahiso.
Taba ea boikhethelo
- MAC
- Matšoao
- WAMP
- Tse ding
LIEKETSENG MOKHOPO
Lethathamo la 7: Litlhaloso tsa tekheniki
- Phepelo ea motlakase ho tloha ho USB
- Tšebeliso ea matla 0.5 W
- Mofuta oa khokahano K2 RJ-12 6/4
- Mofuta oa khokahano K3 mofuta oa mini B
- Litekanyo (L x W x H) 90 x 18 x 60 limilimithara
- Boima ba 'mele 40 g
- Mocheso oa tikoloho 0 ho isa ho 50 °C
- Mongobo wa tikoloho max. 95%, ha ho condensation
- Boholo ba bophahamo 2000 m
- Boemo ba ho phahamisa e otlolohileng
- Mocheso oa lipalangoang le oa polokelo -20 ho isa ho 60 ° C
- Tekanyo ea tšilafalo 2
- Sehlopha sa tšireletso IP30
LIKAROLO TSA TLATSETSO
Bakeng sa ho odara likarolo tse setseng tse latelang Linomoro tsa Karolo li lokela ho sebelisoa:
LIPHETOHO
Tafole e latelang e hlalosa liphetoho tsohle tsa tokomane.
| Letsatsi | V. | Tlhaloso |
| 05.06.24 | 1 | Phetolelo ea pele, e fanoeng e le LPC-2.DB2 UserManual. |
TS'ELISO
- SMARTEH doo / Poljubinj 114 5220 Tolmin Slovenia
- Mohala: +386(0) 388 44 00
- lengolo-tsoibila: info@smarteh.si
- www.smarteh.si
E ngotsoe ke: SMARTEH doo
Copyright © 2024, SMARTEH doo
Litokomane / Lisebelisoa
 |
SMARTEH LPC-2.DB2 Longo Programmable Controller Debug Module [pdf] Bukana ea Mosebelisi LPC-2.DB2, LPC-2.DB2 Longo Programmable Controller Debug Module, Longo Programmable Controller Debug Module, Programmable Controller Debug Module, Controller Debug Module, Debug Module, Module |