SMARTEH LPC-2.DB2 Longo Programmable Controller Debug Module

FAQ

Mibvunzo Inowanzo bvunzwa

• Q: Ko LPC-2.DB2 debug module inogona kushandiswa nemamwe ma controller modhi?
  • A: Iyo LPC-2.DB2 yakanyatsogadzirirwa kushandiswa neLPC-2.main modules uye mamwe materminals evashandisi sezvakarongwa murondedzero. Inokurudzirwa kutarisa kune chigadzirwa chekushandisa kune ruzivo rwekuenderana.
• Q: Chii chandinofanira kuita kana ma LED ekuongororwa achiratidza maitiro asina kunaka?
  • A: Kana iwo ma LED ekuongorora achiratidza maitiro asina kujairika kana asingaratidzi kushanda kwakajairika, tarisa maratidziro uye uone kuisirwa kwakaringana zvinoenderana neakapihwa ekubatanidza zvirongwa mubhuku rekushandisa.

MITIRO UYE ZVINOGWARWA

Miyero, kurudziro, mirau uye zviga zvemunyika umo michina ichashanda, inofanirwa kutariswa paunenge uchironga uye nekuisa zvigadzirwa zvemagetsi. Shanda pa100 .. 240 V AC network inotenderwa kuvashandi vane mvumo chete.

YAMBIRO yenjodzi: Zvishandiso kana ma modules anofanirwa kuchengetedzwa kubva kunyoro, tsvina uye kukuvara panguva yekufambisa, kuchengetedza uye kushanda.

WARRANTY CONDITIONS

WARRANTY CONDITIONS: Kune ese mamodule LONGO LPC-2 - kana pasina kugadziridzwa kunoitwa uye kwakanyatso kubatanidzwa nevashandi vane mvumo - tichifunga nezve yakanyanya kubvumidzwa yekubatanidza simba, waranti yemwedzi ye24 inoshanda kubva pazuva rekutengesa kusvika kumutengi wekupedzisira, asi kwete kupfuura. Mwedzi 36 mushure mekusununguka kubva kuSmarteh. Muchiitiko chezvikumbiro mukati mewaranti nguva, izvo zvinoenderana nekusashanda kwezvinhu mugadziri anopa mahara kutsiva.

Nzira yekudzoka kwemodule isina kushanda, pamwe chete netsanangudzo, inogona kurongwa nemumiriri wedu ane mvumo. Warranty haisanganisi kukuvadzwa nekuda kwekutakura kana nekuda kwezvisingatariswe zvinoenderana nemitemo yenyika, uko module yakaiswa.

Chishandiso ichi chinofanira kubatanidzwa nemazvo nechirongwa chekubatanidza chakapihwa mubhuku rino. Kukanganisika kunogona kukonzera kukuvara kwechigadzirwa, moto kana kukuvara kwako.
Hazardous voltage mumudziyo anogona kukonzera kuvhunduka kwemagetsi uye zvinogona kukonzera kukuvara kwemunhu kana kufa.

Usambofa WASHANDISA CHIgadzirwa ICHI PAMWE!

Chishandiso ichi hachifanirwe kuiswa mumasisitimu akakosha kwehupenyu (semumidziyo yekurapa, ndege, nezvimwewo).

Kana chigadzirwa chacho chikashandiswa nenzira isina kutaurwa nemugadziri, chiyero chekudzivirira chinopiwa nemichina chinogona kukanganisa.
Tsvina yemagetsi nemidziyo yemagetsi (WEEE) inofanirwa kuunganidzwa zvakasiyana!

LONGO LPC-2 inoenderana neanotevera zviyero:

• EMC: EN 61000-6-3:2007 + A1:2011, EN 61000-6-1:2007, EN 61000-3- 2:2006 + A1:2009 + A2: 2009, EN 61000-3-3:2013
• LVD: IEC 61010-1:2010 (Mupepeti wechitatu), IEC 3-61010-2:201 (Mupepeti wekutanga.)

Smarteh doo inoshandisa mutemo wekuenderera mberi kwekusimudzira.
Naizvozvo tinochengetera kodzero yekuchinja nekuvandudza kune chero zvigadzirwa zvinotsanangurwa mubhuku rino pasina chiziviso chekutanga.

MUNHU:

• SMARTEH doo
• Poljubinj 114 5220 Tolmin Slovenia

MAZWIRO

Zvakarongwa nehurongwa hwekuonekwa mugwaro:

• LED: Light emitting diode

DESCRIPTION

LPC-2.DB2 debug module inoshandiswa kugadzirisa LPC-2.main modules LPC-2.MC9, LPC-2.MM1, LPC-2.MM2, LPC-2.MM3 uye opareta terminals LPC-3.GOT.111 , LPC-3.GOT.131, LPC-3.GOT.112, LPC-3.GOT.012, LPC-3.GOT.002.

FEATURES

INSTALLATION

Connection scheme example

Tafura 2: K1

BHASI remukati

Data transfer

Kubatana kune controller

Tafura 3: K2

K2.1	NC	Haina kubatana
K2.2	GND	Ground
K2.3	NC	Haina kubatana
K2.4	Rx ·¬	Data gamuchira mapindiro
K2.5	Tx ·®	Data kutumira zvakabuda
K2.6	NC	Haina kubatana

Tafura 4: K3

K3.1	VCC	Kuiswa kwemagetsi
K3.2	D-	Data -
K3.3	D+	Data +
K3.4	ID	Inogona kunge iri N/C, GND kana kushandiswa sechiratidzo chekuvapo kwemudziyo
		(yakasungirirwa kuGND ine resistor)
K3.5	GND	Ground

Tafura 5: Adapter connectors

Tafura 6: LEDs

Mounting mirayiridzo

• Zviyero mumamirimita.

YAMBIRO: Zvese zvinongedzo, ma module ekubatanidza uye kuunganidza zvinofanirwa kuitwa nepo module isina kubatana kune iyo huru magetsi.

Mounting mirayiridzo yechinangwa chekugadzirisa:

1. Dzima main power supply.
2. Mount LPC-2.DB2 module kune yakapihwa nzvimbo mukati megetsi panel (DIN EN50022-35 rail mounting).
3. Mount mamwe LPC-2 modules (kana zvichidiwa). Isa moduru yega yega kuDIN njanji kutanga, wozobatanidza mamodules pamwe chete kuburikidza neK1 uye K2 zvibatanidza.
4. Gadzira zvibatanidza sekuratidzira muzvirongwa zvekubatanidza.
5. Bhuruu LED1 inofanirwa kubatidzwa.

Dismount in reverse order. Pakukwirisa/kudzikisa mamodules kuenda/kubva kuDIN njanji nzvimbo yemahara yeinenge module imwe inofanira kusiiwa panjanji yeDIN.

CHERECHEDZA: LPC-2 main module inofanirwa kupihwa simba zvakasiyana kubva kune mamwe magetsi akabatana neLPC-2 system. Signal waya dzinofanirwa kuiswa zvakasiyana kubva kune simba uye yakakwirira voltage waya zvinoenderana neyakajairwa indasitiri yemagetsi yekuisa mwero.

Module labeling

Label Description:

1. XXX-N.ZZZ - zita rakazara rechigadzirwa.
   • XXX-N - Chigadzirwa mhuri
   • ZZZ - chigadzirwa
2. P/N: AAABBBCCDDDEEE - chikamu nhamba.
   • AAA - general kodhi yemhuri yechigadzirwa,
   • BBB - pfupi chigadzirwa zita,
   • CCDDD - kutevedzana kodhi,
     • CC - gore rekuvhura kodhi,
     • DDD - derivation kodhi,
   • EEE - vhezheni kodhi (yakachengeterwa ramangwana HW uye/kana SW firmware upgrades).
3. S/N: SSS-RR-YYXXXXXXXXX - siriyo nhamba.
   • SSS - pfupi chigadzirwa zita,
   • RR - mushandisi kodhi (yedzo maitiro, semuenzaniso Smarteh munhu xxx),
   • YY - gore,
   • XXXXXXXXX - nhamba yazvino stack.
4. D/C: WW/YY - kodhi yemazuva.
   • WW - vhiki uye
   • YY - gore rekugadzira.

Optional

1. MAC
2. Symbols
3. WAMP
4. Zvimwe

ZVAKAITIKA ZVINHU

Tafura 7: Zvido zvehunyanzvi

• Magetsi kubva ku USB
• Simba rekushandisa 0.5 W
• Kubatanidza mhando K2 RJ-12 6/4
• Kubatanidza mhando K3 mini B mhando
• Dimensions (L x W x H) 90 x 18 x 60 mm
• Kurema 40 g
• Ambient tembiricha 0 kusvika 50 °C
• Ambient humidity max. 95%, hapana condensation
• Maximum altitude 2000 m
• Mounting chinzvimbo vertical
• Kutakura uye kuchengetedza tembiricha -20 kusvika 60 ° C
• Dhigirii rekusvibisa 2
• Dziviriro kirasi IP30

SPARE PARTS

Pakuhodha masipini anotevera Chikamu Nhamba dzinofanirwa kushandiswa:

CHINHU

Tafura inotevera inotsanangura shanduko dzese kugwaro.

Date	V.	Tsanangudzo
05.06.24	1	Shanduro yekutanga, yakabudiswa seLPC-2.DB2 UserManual.

CONTACT

• SMARTEH doo / Poljubinj 114 5220 Tolmin Slovenia
• Tel: +386(0) 388 44 00
• e-mail: info@smarteh.si
• www.smarteh.si

Yakanyorwa na: SMARTEH doo
Copyright © 2024, SMARTEH doo

Zvinyorwa / Zvishandiso

SMARTEH LPC-2.DB2 Longo Programmable Controller Debug Module [pdf] User Manual LPC-2.DB2, LPC-2.DB2 Longo Programmable Controller Debug Module, Longo Programmable Controller Debug Module, Programmable Controller Debug Module, Controller Debug Module, Debug Module, Module

References

• User Manual