Incwadana yomsebenzisi weHardware
QIO Series Network Audio I/O Expander: QIO-ML4i, QIO-L4o, QIO-ML2x2
QIO Series Network Control I/O Expanders: QIO-GP8x8, QIO-S4, QIO-IR1x4

INGCACISO YEMIGAQO KUNYE NEIMPAWU
Igama elithile “ISILUMKISO” ibonisa imiyalelo malunga nokhuseleko lomntu. Ukungaphumeleli ukuzilandela kunokubangela ukwenzakala emzimbeni okanye ukufa.
Igama elithile “CAUTION” ibonisa imiyalelo malunga nomonakalo onokwenzeka kwisixhobo somzimba. Ukungaphumeleli ukuzilandela kunokubangela umonakalo wesixhobo kwisixhobo esinokuthi singagqunywanga phantsi kwewaranti.
Igama elithile “KUBALULEKILE” ibonisa imiyalelo okanye ulwazi olubalulekileyo ekugqityweni ngempumelelo kwenkqubo.
Igama elithile "PHAWULA" ibonisa ulwazi olongezelelweyo oluluncedo.
Umbane odanyazayo onesihloko sotolo kunxantathu ulumkisa umsebenzisi ngobukho bevolthi enobungozi engafakwanga.tage ngaphakathi kwendawo ebiyelweyo yemveliso enokuthi yenze umngcipheko wokothuka kombane ebantwini.
Indawo yesikhuzo ngaphakathi kunxantathu ilumkisa umsebenzisi ngokhuseleko olubalulekileyo, imiyalelo yokusebenza kunye nokugcinwa kule ncwadana.

IMIYALELO EBALULEKILEYO YOKHUSELEKO

ISILUMKISO!: UKUTHINTELA UMLILO OKANYE UKUTSHOKISWA KOMbane, SUKUSIBONELELA ESI SIXHOBO EMVULWE OKANYE UKUFUMBA.

• I-Ambient yokuSebenza ePhakamileyo - Ukuba ifakwe kwi-rack evaliweyo okanye i-multi-unit assembly, i-ambient ye-ambient yokusebenza kwendawo ye-rack ingaba nkulu kune-ambient yegumbi. Kufuneka kuqwalaselwe ukuqinisekisa ukuba ubushushu obuphezulu bokusebenza (0°C ukuya ku-50°C (32°F ukuya ku-122°F) alugqithiswanga.Noko ke, ukuba ufaka i-GP8x8 kwindibano yerakhi yeeyunithi ezininzi ezineeyunithi kuzo zonke. emacaleni, ubushushu obuphezulu bokusebenza akufanele budlule kwi-40 ° C xa izixhobo zibekwe ngaphezulu okanye ngaphantsi.
• Ukuhamba komoya okuNcitshiswayo - Ukufakwa kwezixhobo kwi-rack kufuneka kube njalo ukuba ubungakanani bokuhamba komoya obufunekayo ekusebenzeni ngokukhuselekileyo kwezixhobo aluphazamiseki.

1. Funda le miyalelo.
2. Gcina le miyalelo.
3. Mamela zonke izilumkiso.
4. Landela yonke imiyalelo.
5. Musa ukusebenzisa esi sixhobo kufutshane namanzi.
6. Musa ukuntywilisela isixhobo emanzini okanye kulwelo.
7. Musa ukusebenzisa nasiphi na isitshizi se-aerosol, isicoci, isibulali-ntsholongwane okanye isiqhumiso kwisixhobo, kufutshane okanye kwisixhobo.
8. Coca kuphela ngelaphu elomileyo.
9. Musa ukuvala nayiphi na indawo yokuvula umoya. Faka ngokuhambelana nemiyalelo yomenzi.
10. Gcina zonke iindawo zokungenisa umoya zingenathuli okanye ezinye izinto.
11. Musa ukufaka kufuphi nayo nayiphi na imithombo yobushushu efana neeradiyetha, iirejista zobushushu, izitovu, okanye ezinye izixhobo (kuquka amplifiers) ezivelisa ubushushu.
12. Sukukhupha isixhobo ngokutsala intambo, sebenzisa iplagi.
13. Sebenzisa kuphela izincamatheliso/izixhobo ezichazwe ngumvelisi.
14. Khupha esi sixhobo ngexesha lesiphango sombane okanye xa singasetyenziswa ixesha elide.
15. Thumela zonke iinkonzo kubasebenzi benkonzo abaqeqeshiweyo. Inkonzo iyafuneka xa i-apparatus yonakaliswe nangayiphi na indlela, njengokuba ulwelo luchithekile okanye izinto ziye zawela kwi-apparatus, i-apparatus ibonakaliswe yimvula okanye ukufuma, ayisebenzi ngokuqhelekileyo, okanye iye yawa.
16. Namathela kuzo zonke ezisebenzayo, iikhowudi zasekuhlaleni.
17. Nxibelelana nenjineli enelayisensi, xa uthandabuza okanye kuphakama imibuzo malunga nokufakwa kwezixhobo zomzimba.

ULondolozo kunye noLungiso

ISILUMKISO: Itekhnoloji ephucukileyo, umz., ukusetyenziswa kwezinto zale mihla kunye ne-electronics enamandla, ifuna iindlela zokulondolozwa nokulungiswa ngokukodwa. Ukuphepha ingozi yomonakalo olandelayo kwisixhobo, ukwenzakala kwabantu kunye/okanye ukwenziwa kweengozi ezongezelelweyo zokhuseleko, wonke umsebenzi wogcino okanye wokulungisa kwisixhobo kufuneka wenziwe kuphela sisikhululo senkonzo esigunyazisiweyo se-QSC okanye nguMsasazi ogunyazisiweyo we-QSC waMazwe ngaMazwe. I-QSC ayinaxanduva lwako nakuphi na ukwenzakala, ukwenzakala okanye umonakalo onxulumeneyo ovela kuko nakuphi na ukusilela komthengi, umnini okanye umsebenzisi wesixhobo ukuququzelela olo lungiso.
KUBALULEKILE! i-PoE Power Input – IEEE 802.3af Uhlobo loku-1 lwe-PSE olufunekayo kwi-LAN (POE) okanye i-24 VDC unikezelo lombane olufunekayo.
Ingxelo yeFCC
Esi sixhobo sivavanyiwe kwaye sifunyenwe ukuthobela imida yeDivaysi yeDijithali yeKlasi A, ngokungqinelana neCandelo le-15 leMithetho yeFCC. Le mida yenzelwe ukubonelela ngokhuseleko olufanelekileyo ekuphazamisekeni okuyingozi xa isixhobo sisebenza kwindawo yorhwebo. Esi sixhobo sivelisa, sisebenzisa, kwaye sinokusasaza amandla erediyo yerediyo kwaye, ukuba asifakanga kwaye sisetyenziswa ngokuhambelana nencwadana yemiyalelo, sinokubangela uphazamiseko oluyingozi kunxibelelwano lwerediyo. Ukusebenza kwesi sixhobo kwindawo yokuhlala kunokubangela ukuphazamiseka okuyingozi kwimeko apho umsebenzisi kuya kufuneka alungise uphazamiseko ngeendleko zakhe.

Okusingqongileyo

• Umjikelo woBomi beMveliso elindelekileyo: iminyaka eyi-10
• Uluhlu lobushushu boGcino: -20°C ukuya +70°C
• I-Humidity ehambelanayo: i-5 ukuya kwi-85% ye-RH, i-non-condensing

Ingxelo yeRoHS
I-Q-SYS QIO Endpoints ihambelana ne-European Directive 2015/863/EU - Ukuthintelwa kwezinto ezinobungozi (RoHS).
I-Q-SYS QIO Endpoints ihambelana ne "China RoHS" imiyalelo nge-GB / T24672. Itshathi elandelayo inikezelwe ukusetyenziswa kwemveliso eTshayina nakwimimandla yayo:

	QSC Q-SYS 010 Isiphelo
(Igama leNdawo)	(Izinto ezinobungozi)
	(Pb)	(HG)	(Cd)	(Cr(vi))	(PBB)	(PBDE)
(Iindibano zePCB)	X	0	0	0	0	0
(Iindibano zeChassis)	X	0	0	0	0	0

SJ / T 11364
O: GB/T 26572
X: GB/T 26572.
Le theyibhile ilungiswe ngokulandela imfuneko ye-SJ/T 11364.
O: Ibonisa ukuba ukuxinwa kwezinto kuzo zonke izinto ezilinganayo zenxalenye zingaphantsi komda ofanelekileyo ochazwe kwi-GB/T 26572.
X: Ibonisa ukuba ukuxinwa kwezinto ubuncinane kwi-homogeneous material yecandelo kungaphezulu komda ofanelekileyo ochazwe kwi-GB/T 26572.
(Ukutshintshwa kunye nokuncitshiswa komxholo akunakufezekiswa okwangoku ngenxa yezizathu zobugcisa okanye zezoqoqosho.)

Yintoni ekwiBhokisi 

QIO-ML2x2

Intshayelelo

Uluhlu lwe-Q-SYS QIO lubonelela ngeemveliso ezininzi ezinokusebenzela iinjongo ezininzi zomsindo kunye nokulawula.
I-QIO-ML4i
I-Q-SYS ML4i yindawo yokuphela komsindo womnatha wendalo kwi-Q-SYS Ecosystem, esebenza njengengeniso ye-mic/line eyenza ukuhanjiswa komsindo okusekwe kwinethiwekhi. I-compact form factor ibandakanya i-hardware yokunyuswa komphezulu evumela ukunyuswa okulumkileyo kunye nobuchule ngelixa ikhithi ye-rack ekhethiweyo ilingana nesixhobo esinye ukuya kwezine kwifomathi eqhelekileyo ye-1U eneshumi elinesithoba le-intshi. Ubumbumbulu obunamajelo amane bufumana ubungakanani obuchanekileyo bonxibelelwano lwe-analog yesandi kwiindawo ezinqwenelekayo ngaphandle kobuninzi okanye inkcitho. Ukuya kuthi ga kwizixhobo ezine ezinokuthi zibe yi-daisy-chained off one access switch port, ngaphandle kwe-24 VDC amandla akhoyo. Kungenjalo, nganye inokunikwa amandla nge-Ethernet.
QIO-L4o
I-Q-SYS L4o sisiphelo somsindo womnatha womnatha kwi-Ecosystem ye-Q-SYS, esebenza njengemveliso yomgca eyenza ukuhanjiswa komsindo okusekelwe kwinethiwekhi. I-compact form factor ibandakanya i-hardware yokunyuswa komphezulu evumela ukunyuswa okulumkileyo kunye nobuchule ngelixa ikhithi ye-rack ekhethiweyo ilingana nesixhobo esinye ukuya kwezine kwifomathi eqhelekileyo ye-1U eneshumi elinesithoba le-intshi. Ubumbumbulu obunamajelo amane bufumana ubungakanani obuchanekileyo bonxibelelwano lwe-analog yesandi kwiindawo ezinqwenelekayo ngaphandle kobuninzi okanye inkcitho. Ukuya kuthi ga kwizixhobo ezine ezinokuthi zibe yi-daisy-chained off one access switch port, ngaphandle kwe-24 VDC amandla akhoyo. Kungenjalo, nganye inokunikwa amandla nge-Ethernet.
QIO-ML2x2
I-Q-SYS ML2x2 yi-intanethi ye-audio endpoint yendabuko kwi-Q-SYS Ecosystem, esebenza njenge-mic / igalelo lomgca, isixhobo sokukhupha umgca, esenza ukuba ukuhanjiswa komsindo okusekelwe kwinethiwekhi. I-compact form factor ibandakanya i-hardware yokunyuswa komphezulu evumela ukunyuswa okulumkileyo kunye nobuchule ngelixa ikhithi ye-rack ekhethiweyo ilingana nesixhobo esinye ukuya kwezine kwifomathi eqhelekileyo ye-1U elinethoba le-intshi. Ubumbumbulu obunamajelo amane bufumana ubungakanani obuchanekileyo bonxibelelwano lwe-analog yesandi kwiindawo ezinqwenelekayo ngaphandle kobuninzi okanye inkcitho. Ukuya kuthi ga kwizixhobo ezine ezinokuthi zibe yi-daisy-chained off one access switch port, ngaphandle kwe-24 VDC amandla akhoyo. Kungenjalo, nganye inokunikwa amandla nge-Ethernet.
I-QIO-GP8x8
I-Q-SYS GP8x8 sisiphelo solawulo lwenethiwekhi yemveli kwi-Q-SYS Ecosystem, ibonelela ngeNjongo ngokuBanzi yokuNgena/Isiphumo (GPIO) uqhagamshelo oluvumela uthungelwano lwe-Q-SYS ukuba lujongane nezixhobo zangaphandle, ezifana nezibonisi ze-LED, iiswitshi, iirelays. , kunye nee-potentiometers, kunye nolawulo lwesiko okanye lomntu wesithathu. I-compact form factor ibandakanya i-hardware yokunyuswa komphezulu evumela ukunyuswa okulumkileyo kunye nobuchule ngelixa ikhithi ye-rack ekhethiweyo ilingana nesixhobo esinye ukuya kwezine kwifomathi eqhelekileyo ye-1U eneshumi elinesithoba le-intshi. Ukuya kuthi ga kwizixhobo ezine ezinokuthi zibe yi-daisy-chained off one access switch port, ngaphandle kwe-24 VDC amandla akhoyo. Kungenjalo, nganye inokunikwa amandla nge-Ethernet.
I-QIO-S4
I-Q-SYS S4 isiphelo solawulo lwenethiwekhi yendalo kwi-Q-SYS Ecosystem, esebenza njengebhulorho ye-IP-to-serial eyenza ukuhanjiswa kolawulo olusekelwe kwinethiwekhi. I-compact form factor ibandakanya i-hardware yokunyuswa komphezulu evumela ukunyuswa okulumkileyo kunye nobuchule ngelixa ikhithi ye-rack ekhethiweyo ilingana nesixhobo esinye ukuya kwezine kwifomathi eqhelekileyo ye-1U eneshumi elinesithoba le-intshi. Ukuya kuthi ga kwizixhobo ezine ezinokuthi zibe yi-daisy-zibotshelelwe kwizibuko elinye lokutshintsha ukufikelela, ngaphandle kokuba +24 amandla eVDC akhoyo. Kungenjalo, nganye inokunikwa amandla nge-Ethernet.
I-QIO-IR1x4
I-Q-SYS IR1x4 yi-network control endpoint native kwi-Q-SYS Ecosystem, esebenza njenge-IP-to-IR ibhulorho eyenza ukuhanjiswa kolawulo lwe-infrared kwinethiwekhi. I-compact form factor ibandakanya i-hardware yokunyuswa komphezulu evumela ukunyuswa okulumkileyo kunye nobuchule ngelixa ikhithi ye-rack ekhethiweyo ilingana nesixhobo esinye ukuya kwezine kwifomathi eqhelekileyo ye-1U eneshumi elinesithoba le-intshi. Ukuya kuthi ga kwizixhobo ezine ezinokuthi zibe yi-daisy-zibotshelelwe kwizibuko elinye lokutshintsha ukufikelela, ngaphandle kokuba +24 amandla eVDC akhoyo. Kungenjalo, nganye inokunikwa amandla nge-Ethernet.

Iimfuno zamandla

I-Q-SYS QIO Series inikezela ngesisombululo samandla esiguquguqukayo esivumela umhlanganisi ukuba akhethe ukusebenzisa i-24 VDC umbane okanye i-802.3af Uhlobo lwe-1 ye-PoE PSE. Nokuba ngesisombululo samandla, kufuneka ulandele imiyalelo yokhuseleko lonikezelo lwamandla okanye isitofu esikhethiweyo. Ukufumana iinkcukacha malunga ne-24 VDC okanye i-PoE iimfuno zobonelelo lombane, jonga kwiinkcukacha zemveliso.
ISILUMKISO: Ukuthintela umngcipheko wokutshatyalaliswa kombane, esi sixhobo kufuneka siqhagamshelwe kuphela kwindawo yokubonelela kunye nomhlaba okhuselayo xa usebenzisa umbane weklasi I.
Amandla phezu kwe-Ethernet (PoE)
PHAWULA: Isixhobo asikwazi ukunika amandla e-daisy-chained kwisixhobo sangaphandle esinamandla phezu kwe-Ethernet. Ubonelelo lweVDC lwangaphandle lwama-24 luyafuneka kwizicelo zombane zedaisy-chaining. Isixhobo sinokubonelela nge-Ethernet daisy-chaining nokuba ngumthombo wamandla.
I-24VDC Ubonelelo lwangaphandle kunye neDaisy-Chained Devices
PHAWULA: Xa usebenzisa i-FG-901527-xx i-accessory power accessory, ukuya kuthi ga kwizixhobo ezine (4) ezinokuthi zinikwe amandla.

Iinkcukacha kunye nemilinganiselo

Ukucaciswa kwemveliso kunye nemizobo yobungakanani be-QIO Endpoints inokufumaneka kwi-intanethi www.mzaic.

Uqhagamshelo kunye neeCallouts
QIO-ML4i Iphaneli yangaphambili

1. I-LED yamandla -Ikhanyisa eluhlaza okwesibhakabhaka xa i-Q-SYS QIO-ML4i inikwe amandla.
2. I-ID ye-ID-I-LED idanyaza eluhlaza xa ibekwe kwiNdlela ye-ID nge-ID ye-ID okanye i-Q-SYS Configurator.
3. Iqhosha le-ID-Ifumana i-QIO-ML4i kwi-Q-SYS uMyili weSoftware kunye ne-Q-SYS Configurator.
   QIO-ML4i Iphaneli yangasemva

1. Igalelo laMandla angaphandle 24 VDC 2.5 A - Amandla ancedisayo, i-24 VDC, i-2.5 A, i-2-pin ye-Euro isixhumi.
2.  I-Daisy-Chain Power Output 24 VDC 2.5 A - Amandla ancedisayo, i-24 VDC, i-2.5 I-2-pin ye-Euro isixhumi.
3. I-LAN [PoE] - i-RJ-45 isixhumi, i-802.3af PoE Uhlobo lwe-1 Udidi lwe-3 amandla, i-Q-LAN.
4. I-LAN [THRU] - i-RJ-45 isixhumi, i-Ethernet daisy-chaining.
5. Ukusetwa kwakhona kweDivaysi-Sebenzisa i-paperclip okanye isixhobo esifanayo ukubuyisela useto lwenethiwekhi olungagqibekanga kwaye ubuyisele useto olungagqibekanga lwasefektri. Phambi kokuzama ukuseta ngokutsha, bhekisa kwi Q-SYS Uncedo ngeenkcukacha.
6. I-Mic / Line Inputs - Iziteshi ezine, ezilinganisiweyo okanye ezingalinganiyo, amandla e-phantom - i-orange.

QIO-L4o Iphaneli yangaphambili

1. I-LED yamandla -Ikhanyisa eluhlaza okwesibhakabhaka xa i-Q-SYS QIO-L4o inikwe amandla.
2. I-ID ye-ID-I-LED idanyaza eluhlaza xa ibekwe kwiNdlela ye-ID nge-ID ye-ID okanye i-Q-SYS Configurator.
3. Iqhosha le-ID-Ifumana i-QIO-L4o kwi-Q-SYS uMyili weSoftware kunye ne-Q-SYS Configurator.

Iphaneli yeQIO-L4o yangasemva

1. Igalelo lamandla angaphandle 24V DC 2.5 A - Amandla ancedisayo, i-24 VDC, i-2.5 A, i-2-pin ye-Euro isixhumi.
2. I-Daisy-Chain Power Output 24V DC 2.5 A - Amandla ancedisayo, i-24 VDC, 2.5 I-2-pin ye-Euro isixhumi.
3.  I-LAN [PoE] - i-RJ-45 isixhumi, i-802.3af PoE Uhlobo lwe-1 Udidi lwe-2 amandla, i-Q-LAN.
4. I-LAN [THRU] - i-RJ-45 isixhumi, i-Ethernet daisy-chaining.
5.  Ukusetwa kwakhona kweDivaysi-Sebenzisa i-paperclip okanye isixhobo esifanayo ukubuyisela useto lwenethiwekhi olungagqibekanga kwaye ubuyisele useto olungagqibekanga lwasefektri. Phambi kokuzama ukuseta ngokutsha, bhekisa kwi Q-SYS Uncedo ngeenkcukacha.
6.  Iziphumo zomgca - Imijelo emine, elinganayo okanye engalinganiyo - eluhlaza.

QIO-ML2x2 Iphaneli yangaphambili 

1. I-LED yamandla -Ikhanyisa eluhlaza okwesibhakabhaka xa i-Q-SYS QIO-ML2x2 inikwe amandla.
2. I-ID ye-ID-I-LED idanyaza eluhlaza xa ibekwe kwiNdlela ye-ID nge-ID ye-ID okanye i-Q-SYS Configurator.
3. Iqhosha le-ID-Ifumana i-QIO-ML2x2 kwi-Q-SYS uMyili weSoftware kunye ne-Q-SYS Configurator.

QIO-ML2x2 Iphaneli yangasemva 

1. Igalelo lamandla angaphandle 24V DC 2.5 A - Amandla ancedisayo, i-24 VDC, i-2.5 A, i-2-pin ye-Euro isixhumi.
2. I-Daisy-Chain Power Output 24V DC 2.5 A - Amandla ancedisayo, i-24 VDC, 2.5 I-2-pin ye-Euro isixhumi.
3. I-LAN [PoE] - i-RJ-45 isixhumi, i-802.3af PoE Uhlobo lwe-1 Udidi lwe-3 amandla, i-Q-LAN.
4. I-LAN [THRU] - i-RJ-45 isixhumi, i-Ethernet daisy-chaining.
5. Ukusetwa kwakhona kweDivaysi-Sebenzisa i-paperclip okanye isixhobo esifanayo ukubuyisela useto lwenethiwekhi olungagqibekanga kwaye ubuyisele useto olungagqibekanga lwasefektri. Phambi kokuzama ukuseta ngokutsha, bhekisa kwi Q-SYS Uncedo ngeenkcukacha.
6. Iziphumo zomgca - Iitshaneli ezimbini, ezilungeleleneyo okanye ezingalinganiyo - eziluhlaza.
7.  I-Mic / Line Inputs - Iziteshi ezimbini, ezilinganisiweyo okanye ezingalinganiyo, amandla e-phantom - i-orange.

QIO-GP8x8 Iphaneli yangaphambili

1. I-LED yamandla -Ikhanyisa eluhlaza okwesibhakabhaka xa i-Q-SYS QIO-GP8x8 ivuliwe.
2. I-ID ye-ID-I-LED idanyaza eluhlaza xa ibekwe kwiNdlela ye-ID nge-ID ye-ID okanye i-Q-SYS Configurator.
3. Iqhosha le-ID-Ifumana i-QIO-GP8x8 kwi-Q-SYS uMyili weSoftware kunye ne-Q-SYS Configurator.

QIO-GP8x8 Iphaneli yangasemva

1. Igalelo lamandla angaphandle 24V DC 2.5 A - Amandla ancedisayo, i-24 VDC, i-2.5 A, i-2-pin ye-Euro isixhumi.
2. I-Daisy-Chain Power Output 24V DC 2.5 A - Amandla ancedisayo, i-24 VDC, 2.5 I-2-pin ye-Euro isixhumi.
3. I-LAN [PoE] - i-RJ-45 isixhumi, i-802.3af PoE Uhlobo lwe-1 Udidi lwe-3 amandla, i-Q-LAN.
4. I-LAN [THRU] - i-RJ-45 isixhumi, i-Ethernet daisy-chaining.
5. Ukusetwa kwakhona kweDivaysi-Sebenzisa i-paperclip okanye isixhobo esifanayo ukubuyisela useto lwenethiwekhi olungagqibekanga kwaye ubuyisele useto olungagqibekanga lwasefektri. Phambi kokuzama ukuseta ngokutsha, bhekisa kwi Q-SYS Uncedo ngeenkcukacha.
6. I-12V DC .1A Iphumile – Isetyenziselwa iiNgeniso zeNjongo ngokuBanzi kunye neZiphumo (GPIO). Isebenzisa izikhonkwane zokudibanisa ezimnyama 1 kunye ne-11 (ayinanombolo).
7. Amagalelo e-GPIO – 8 amagalelo, 0-24V igalelo le-analog, igalelo ledijithali, okanye ukuvalwa koqhagamshelwano (Izikhonkwane ezibhalwe 1–8 izikhonkwane ezilinganayo 1–8 kwiQ-SYS uMyili weSoftware yeGPIO yecandelo leInput). Utsalo olulungiselelwayo ukuya +12V.
8. Umhlaba woMqondiso-Ukusetyenziswa kunye neGPIO. Isebenzisa izikhonkwane zokudibanisa ezimnyama 10 kunye ne-20 (ayinanombolo).
9.  Iziphumo zeGPIO – iziphumo ezisi-8, umqokeleli ovulekileyo (24V, 0.2A sink maximum) ngokutsalwa ukuya ku +3.3V (Izikhonkwane ezibhalwe 1–8 ezilinganayo nezikhonkwane 1–8 kwiQ-SYS Designer Software GPIO Output component).

QIO-S4 Iphaneli yangaphambili

1. I-LED yamandla -Ikhanyisa eluhlaza okwesibhakabhaka xa i-Q-SYS QIO-S4 inikwe amandla.
2. I-ID ye-ID-I-LED idanyaza eluhlaza xa ibekwe kwiNdlela ye-ID nge-ID ye-ID okanye i-Q-SYS Configurator.
3.  Iqhosha le-ID-Ifumana i-QIO-S4 kwi-Q-SYS uMyili weSoftware kunye ne-Q-SYS Configurator.

Iphaneli yeQIO-S4 yangasemva

1. Igalelo lamandla angaphandle 24V DC 2.5 A - Amandla ancedisayo, i-24 VDC, i-2.5 A, i-2-pin ye-Euro isixhumi.
2. I-Daisy-Chain Power Output 24V DC 2.5 A - Amandla ancedisayo, i-24 VDC, 2.5 I-2-pin ye-Euro isixhumi.
3. I-LAN [PoE] - i-RJ-45 isixhumi, i-802.3af PoE Uhlobo lwe-1 Udidi lwe-1 amandla, i-Q-LAN.
4. I-LAN [THRU] - i-RJ-45 isixhumi, i-Ethernet daisy-chaining.
5. Ukusetwa kwakhona kweDivaysi-Sebenzisa i-paperclip okanye isixhobo esifanayo ukubuyisela useto lwenethiwekhi olungagqibekanga kwaye ubuyisele useto olungagqibekanga lwasefektri. Phambi kokuzama ukuseta ngokutsha, bhekisa kwi Q-SYS Uncedo ngeenkcukacha.
6. I-COM 1 Isibuko se-Serial-Configurable kwi-Q-SYS Designer Software ye-RS232, RS485 Half-Duplex TX, RS485 Half-Duplex RX, okanye RS485/422 Full Duplex. Jonga "QIO-S4 Uthotho lweePort Pinouts" kwiphepha le-14.
7. I-COM 2, i-COM 3, i-COM 4 iZibuko zothotho – Inikezelwe kunxibelelwano lweRS232. Jonga "QIO-S4 Uthotho lweePort Pinouts" kwiphepha le-14.

QIO-S4 Uthotho Port Pinouts
I-QIO-S4 inamazibuko amane alandelelanayo:

• I-COM 1 iqwalaselwe kwiQ-SYS uMyili weSoftware yeRS232, RS485 Half Duplex TX, RS485 Half Duplex RX, okanye
  RS485/422 Full Duplex.
• I-COM 2-4 izibuko zinikezelwe kunxibelelwano lwe-RS232.

I-RS232 Pinout: COM 1 (Inoqwalaselo), COM 2-4 (Inikezelwe) 

Iphini	UkuHamba koMqondiso	Inkcazo
	N / A	Umhlaba wokutyikitya
TX	Isiphumo	Dlulisa idatha
RX	Igalelo	Fumana idatha
RTS	Isiphumo	Ukulungele Ukuthumela'
CTS	Igalelo	Kucacile Ukuthumela'

1.  Xa usebenzisa ulawulo lokuhamba kwehardware.

RS485 Isiqingatha seDuplex TX okanye iRX Pinout: COM 1 (Inoqwalaselo)

Iphini	UkuHamba koMqondiso	Inkcazo
	N / A	Umhlaba wokutyikitya
TX	Igalelo/Imveliso	Umahluko B-
RX	(Engasetyenziswanga)	(Engasetyenziswanga)
RTS	Igalelo/Imveliso	Umahluko A+
CTS	(Engasetyenziswanga)	(Engasetyenziswanga)

I-RS485/422 I-Duplex epheleleyo: COM 1 (Inoqwalaselo)

Iphini	UkuHamba koMqondiso	Inkcazo
	N / A	Umhlaba wokutyikitya
TX	Isiphumo	Umahluko Z- / Tx-
RX	Igalelo	Umahluko A+ / Rx+
RTS	Isiphumo	Umahluko Y+ / Tx+
CTS	Igalelo	Umahluko B- / Rx-

QIO-IR1x4 Iphaneli yangaphambili

1. I-LED yamandla -Ikhanyisa eluhlaza okwesibhakabhaka xa i-Q-SYS QIO-IR1x4 ivuliwe.
2. I-ID ye-ID-I-LED idanyaza eluhlaza xa ibekwe kwiNdlela ye-ID nge-ID ye-ID okanye i-Q-SYS Configurator.
3. Iqhosha le-ID-Ifumana i-QIO-IR1x4 kwi-Q-SYS uMyili weSoftware kunye ne-Q-SYS Configurator.

QIO-IR1x4 Iphaneli yangasemva

1. Igalelo lamandla angaphandle 24V DC 2.5 A - Amandla ancedisayo, i-24 VDC, i-2.5 A, i-2-pin ye-Euro isixhumi.
2. I-Daisy-Chain Power Output 24V DC 2.5 A - Amandla ancedisayo, i-24 VDC, 2.5 I-2-pin ye-Euro isixhumi.
3. I-LAN [PoE] - i-RJ-45 isixhumi, i-802.3af PoE Uhlobo lwe-1 Udidi lwe-1 amandla, i-Q-LAN.
4. I-LAN [THRU] - i-RJ-45 isixhumi, i-Ethernet daisy-chaining.
5.  Ukusetwa kwakhona kweDivaysi-Sebenzisa i-paperclip okanye isixhobo esifanayo ukubuyisela useto lwenethiwekhi olungagqibekanga kwaye ubuyisele useto olungagqibekanga lwasefektri. Phambi kokuzama ukuseta ngokutsha, bhekisa kwi Q-SYS Uncedo ngeenkcukacha.
6.  I-IR SIG LEDS - Bonisa umsebenzi wokuhambisa kwi-CH / IR Isiphumo se-1-4.
7. Iziphumo ze-IR-Inoqwalaselo kwi-Q-SYS uMyili weSoftware njenge-IR okanye uthotho RS232. Jonga “QIO-IR1x4 IR Port Pinouts” kwiphepha le-16.
8. Igalelo le-IR - Ibonelela nge-3.3VDC kwaye ifumana idatha ye-IR. Jonga “QIO-IR1x4 IR Port Pinouts” kwiphepha le-16.

QIO-IR1x4 IR Port Pinouts
I-QIO-IR1x4 ineziphumo ezine ze-IR kunye negalelo elinye le-IR:

• Iziphumo ze-1-4 ziqwalaselwe kwi-Q-SYS uMyili weSoftware ye-IR okanye imo ye-Serial RS232.
• Igalelo libonelela nge-3.3VDC kwaye lifumana idatha ye-IR.

Isiphumo se-IR 1-4: I-IR Mode Pinout 

Iphini	UkuHamba koMqondiso	Inkcazo
SIG	Isiphumo	IR ukuthumela idatha
	N / A	Isalathiso somqondiso

Imveliso ye-IR 1-4: Uthotho RS232 Indlela Pinout

Iphini	UkuHamba koMqondiso	Inkcazo
SIG	Isiphumo	RS232 ukuthumela idatha
	N / A	Isalathiso somqondiso

Igalelo le-IR

Iphini	UkuHamba koMqondiso	Inkcazo
SIG	Igalelo	I-IR ifumana idatha
+	Isiphumo	3.3VDC
	N / A	Isalathiso somqondiso

Ukufakwa kweRack Mount

I-Q-SYS QIO Endpoints yenzelwe ukuba ifakwe kwi-rack-mount rack-mount unit isebenzisa i-Q-SYS 1RU rack tray (FG-901528-00). Indawo yokubeka
itreyi ithatha ukuya kuthi ga kwiiyunithi ezine ze-QIO Endpoint yayo nayiphi na ubude bemveliso.
Isixhobo se-Rack Tray 

Qhoboshela Iikliphu zokuGcina
Kwinqaku lesiphelo le-QIO nganye oyifaka kwi-tray, faka kwaye uqhoboshele ikliphu yokugcina kwindawo emfutshane okanye ubude obude usebenzisa isikrufu sentloko esicaba.

Namathisela i-QIO Endpoints kunye neePleti zokuGlankitha
Slayida iNqaku ngalinye le-QIO kwikliphu yokugcina. Qhoboshela iyunithi nganye ngezikrufu ezibini ezisicaba. Ngokuzithandela uqhoboshele iipleyiti ezingenanto, nganye inezikrufu ezibini zentloko.
PHAWULA: Iipleyiti zokuvala azikhethi kwaye zingasetyenziselwa ukuququzelela ukuhamba komoya okufanelekileyo. Iipleyiti zokugquma ezingasetyenziswanga zinokuqhotyoshelwa ngasemva kwetreyi ukuba ziyimfuneko, njengoko kubonisiwe.

UFakelo lweNtaba yoMphezulu

I-QIO Endpoints inokuphinda ifakwe phantsi kwetafile, phezu kwetafile, okanye eludongeni. Kuyo nayiphi na kwezi zicelo zokunyuswa, sebenzisa isibiyeli sokunyuswa komhlaba kunye nezikrufu zentloko yepani ezibandakanywe nekhithi yenqanawa ye-QIO Endpoint. Izibiyeli zi-symmetrical ukulungiselela ukunyuka kwecala lasekunene ukuya kumhlaba ojongene nomhlaba.
PHAWULA: Iifasteners zokuqhoboshela isibiyeli kumphezulu ziboniswa njenge exampkodwa ayibonelelwanga.

Ukufakwa kwindawo ezimeleyo

Ufakelo oluzimeleyo kwi-table top, sebenzisa i-foam spacers ezine zokubambelela kwi-underside yeyunithi.

QSC Self Help Portal
Funda amanqaku asisiseko solwazi kunye neengxoxo, khuphela isoftware kunye nefirmware, view amaxwebhu emveliso kunye neevidiyo zoqeqesho, kunye nokudala iimeko zenkxaso.
https://qscprod.force.com/selfhelpportal/s/
Uxhaso lwabathengi
Jonga kuQhagamshelwano nathi iphepha kwi-QSC webindawo yeNkxaso yobuGcisa kunye noKhathalelo lwaBathengi, kubandakanywa neenombolo zabo zefowuni kunye neeyure zokusebenza.
https://www.qsc.com/contact-us/
Iwaranti
Ukufumana ikopi yeQSC Limited Warranty, tyelela i-QSC, LLC., webindawo kwi www.mzaic.

© 2022 QSC, LLC. Onke Amalungelo Agciniwe. I-QSC kunye nelogo ye-QSC, i-Q-SYS, kunye ne-Q-SYS logo ziimpawu zorhwebo ezibhalisiweyo ze-QSC, LLC kwi-Patent yase-US kwaye
I-Ofisi yophawu kunye namanye amazwe. Amalungelo awodwa omenzi wechiza anokusebenza okanye asalindwe. Zonke ezinye iimpawu zorhwebo ziyipropati yabanini bazo.
www.qsc.com/patent

Amaxwebhu / Izibonelelo

I-QSC QIO-GP8x8 QIO Series ye-Input yoLawulo lweNethiwekhi okanye i-Expanders Expats [pdf] Incwadi yokusebenzisa I-QIO-ML4i, i-QIO-L4o, i-QIO-ML2x2, i-QIO-GP8x8, i-QIO-S4, i-QIO-IR1x4, i-QIO Series, i-Network Control Input okanye i-Expanders Expats, i-QIO Series ye-Network Control Input okanye i-Expanders Expats, i-QIO-GP8x8 QIO Series yoLawulo lweNethiwekhi Igalelo okanye iZandisi zeZiphumo

Iimbekiselo

• Incwadi yokusebenzisa