Tusi Lesona a Tagata Faigaluega
QIO Series Network Audio I/O Expanders: QIO-ML4i, QIO-L4o, QIO-ML2x2
QIO Fa'asologa o Fesootaiga Pulea I/O Fa'alautele: QIO-GP8x8, QIO-S4, QIO-IR1x4

FA'AMATALAGA O TU'U MA FA'ATUGA
O le faaupuga “LAPATAIGA” o loo faailoa mai ai faatonuga e faatatau i le saogalemu o le tagata lava ia. O le le mulimuli i ai e ono i'u ai i manu'a tino po'o le oti.
O le faaupuga “FAATUATUA” o lo'o fa'ailoa mai ai fa'atonuga e fa'atatau i mea e ono fa'aleagaina i masini fa'aletino. O le le mulimuli i ai e ono i'u ai i le fa'aleagaina o masini i masini atonu e le o aofia i lalo o le warranty.
O le faaupuga “TĀUA” o lo'o fa'ailoa mai ai fa'atonuga po'o fa'amatalaga e taua i le fa'amae'aina lelei o le fa'atinoga.
O le faaupuga “MANATU” fa'ailoa mai fa'amatalaga aoga faaopoopo.
O le uila emo ma se faʻailoga ulu i totonu o se tafatolu e faʻailoa ai le tagata faʻaoga i le i ai o le vol mataʻutia uninsulatedtagu totonu o le oloa afifi e ono aofia ai se aʻafiaga o le eletise teteʻi i tagata.
O le fa'ailoga o lo'o i totonu o le tafatolu e fa'ailoa ai le tagata fa'aoga i fa'atonuga taua o le saogalemu, fa'agaioiga, ma le tausiga i lenei tusi lesona.

FAATONUGA TAU SAOGALEMU

LAPATAIGA!: INA ONA PUEINA LE MU PO'O LE PILI ELETE, AUA LE FA'ATA'I LENEI METOGA I LE timu PO'O LE SUSU.

• Si'osi'omaga Fa'agaoioiga Si'itia - Afai e fa'apipi'i i totonu o se fata tapuni po'o le tele-iunite fa'atasi, o le vevela o le fa'aogaina o le si'osi'omaga e ono sili atu nai lo le si'osi'omaga o le potu. E tatau ona tuʻuina atu le iloiloga ina ia mautinoa e le sili atu le maualuga o le faʻaogaina o le vevela (0°C i le 50°C (32°F i le 122°F). itu, e le tatau ona sili atu i le 8 ° C le maualuga o le vevela faʻaogaina pe a tuʻu masini i luga poʻo lalo.
• Faʻaitiitia le tafe o le ea - O le faʻapipiʻiina o mea faigaluega i totonu o se fata e tatau ona faʻapea e le afaina ai le aofaʻi o le ea e manaʻomia mo le saogalemu o meafaigaluega.

1. Faitau faatonuga nei.
2. Tausia nei faatonuga.
3. Faalogo i lapataiga uma.
4. Mulimuli i faatonuga uma.
5. Aua ne'i fa'aogaina lenei masini e latalata ile vai.
6. Aua le faʻatofuina le mea faigaluega i vai poʻo vai.
7. 'Aua ne'i fa'aogaina so'o se fa'asu'a aerosol, fa'amama, vaila'au fa'ama'i po'o fumigant i luga, latalata po'o totonu ole masini.
8. Fa'amama na'o se ie mago.
9. Aua ne'i poloka so'o se avanoa e savili ai. Fa'apipi'i e tusa ai ma fa'atonuga a le gaosi oloa.
10. Taofi avanoa uma ea ea ia saoloto mai pefu po o isi mea.
11. Aua ne'i fa'apipi'i i tafatafa o so'o se mea fa'avevela e pei o fa'avevela, fa'amau fa'avevela, ogaumu, po'o isi masini (e aofia ai amplifiers) e maua ai le vevela.
12. Aua le faʻapipiʻiina le iunite i le tosoina i luga o le uaea, faʻaaoga le palaka.
13. Fa'aaoga na'o mea fa'apipi'i/mea fa'apipi'i ua fa'ailoa mai e le gaosi oloa.
14. Aveese le masini lenei i taimi o afa uila poʻo pe a le faʻaaogaina mo se taimi umi.
15. Faʻasino uma auaunaga i tagata agavaʻa tautua. E manaʻomia le tautua pe a faʻaleagaina le mea faigaluega i soʻo se auala, pei o le suavai ua masaʻa pe ua toʻulu mea i totonu o le mea faigaluega, o le mea faigaluega na faʻaalia i le timu poʻo le susu, e le ola masani, pe ua faʻapaʻu.
16. Tausi i tulafono fa'apitonu'u uma e talafeagai.
17. Faʻatalanoa i se laisene, inisinia faʻapitoa pe a iai se masalosalo poʻo ni fesili e tulaʻi mai e uiga i se faʻapipiʻiina o masini.

Tausiga ma Toe Fa'aleleia

LAPATAIGA: Fa'atekonolosi maualuluga, fa'ata'ita'iga, o le fa'aogaina o mea fa'aonaponei ma mea fa'aeletonika mamana, e mana'omia fa'apitoa le fa'aleleia ma le toe fa'aleleia o auala. Ina ia aloese mai se lamatiaga o le faaleagaina mulimuli ane o le masini, manu'a i tagata ma / poʻo le faʻatupuina o faʻalavelave saogalemu faʻaopoopo, o galuega uma faʻaleleia poʻo le toe faʻaleleia o le masini e tatau ona faia naʻo se ofisa faʻatagaina QSC poʻo se Faʻasalalauga Faʻavaomalo faʻatagaina. E le nafa le QSC mo so'o se manu'a, fa'aleaga po'o ni fa'aletonu e alia'e mai so'o se fa'aletonu a le tagata fa'atau, pule po'o le fa'aogaina o masini e faafaigofie ai na toe faaleleia.
TAUA! PoE Power Input - IEEE 802.3af Type 1 PSE e manaʻomia ile LAN (POE) poʻo le 24 VDC eletise manaʻomia.
Fa'amatalaga FCC
O nei masini ua uma ona fa'ata'ita'iina ma maua ai le tausisia o tapula'a mo se Vasega A masini numera, e tusa ai ma le Vaega 15 o Tulafono FCC. O tapula'a nei ua mamanuina ina ia maua ai se puipuiga talafeagai mai fa'alavelave fa'alavelave pe a fa'agaoioia masini i totonu o se siosiomaga fa'apisinisi. O mea faigaluega nei e gaosia, fa'aoga, ma mafai ona fa'aolaina le malosi ole alaleo ma, a le fa'apipi'iina ma fa'aogaina e tusa ai ma le tusi fa'atonuga, e ono fa'alavelave fa'alavelave i feso'ota'iga leitio. O le fa'aogaina o nei mea faigaluega i totonu o se nofoaga e nofo ai e ono mafua ai le fa'alavelave fa'aleagaina lea e mana'omia ai le tagata fa'aoga e fa'asa'o le fa'alavelave i lana lava tupe fa'aalu.

Si'osi'omaga

• Oloa Fa'amoemoeina Ta'amilosaga Ola: 10 tausaga
• Teuina vevela faasologa: -20 ° C i + 70 ° C
• Susū Fa'atatau: 5 i le 85% RH, e le fa'asa'o

RoHS Fa'amatalaga
O le Q-SYS QIO Endpoints o loʻo tausisia ma le European Directive 2015/863/EU – Faʻatapulaʻaina o Mea Mataʻutia (RoHS).
Ole Q-SYS QIO Endpoints o lo'o tausisia fa'atonuga "China RoHS" ile GB/T24672. O le siata lenei o loʻo tuʻuina atu mo le faʻaaogaina o oloa i Saina ma ona teritori:

	QSC Q-SYS 010 Fa'ai'uga
(Vaega Igoa)	(O mea Mata'utia)
	(Pb)	(Hg)	(Cd)	(Cr (vi))	(PBB)	(PBDE)
(Fonotaga PCB)	X	0	0	0	0	0
(Fa'apotopotoga Chassis)	X	0	0	0	0	0

SJ / T 11364
O: GB/T 26572
X: GB/T 26572.
O lenei laulau ua saunia e tusa ai ma manaoga o le SJ/T 11364.
O: Faʻaalia o le faʻaogaina o le vailaʻau i mea tutusa uma o le vaega o loʻo i lalo ifo o le tapulaa talafeagai o loʻo faʻamaonia i le GB/T 26572.
X: Faʻailoa mai o le faʻaogaina o le vailaʻau i totonu o se tasi o mea tutusa uma o le vaega o loʻo i luga aʻe o le tapulaa talafeagai o loʻo faʻamaonia i le GB/T 26572.
(Suiga ma le faʻaitiitia o mea e le mafai ona ausia i le taimi nei ona o mafuaʻaga faʻapitoa poʻo le tamaoaiga.)

O a mea i totonu o le Pusa 

QIO-ML2x2

Folasaga

O le Q-SYS QIO Series e ofoina atu le tele o oloa e mafai ona fa'aogaina le tele o leo ma fa'atonuga.
QIO-ML4i
O le Q-SYS ML4i ose feso'ota'iga leo fa'ai'uga fa'ale-aganu'u i le Q-SYS Ecosystem, e avea o se fa'aoga mic/line e mafai ai ona fa'asoa leo fa'avae feso'otaiga. Ole mea fa'apena fa'apena e aofia ai masini fa'apipi'i i luga ole laiga e mafai ai ona fa'apipi'i fa'ata'atia ma fa'ata'atia ae o se pusa fa'ailoga e filifili e fetaui ma masini e tasi i le fa ile fa'atulagaga masani 1U sefuluiva inisi. O le fa'auala fa'agranularity o lo'o maua ai le aofa'i sa'o o feso'ota'iga leo analog i nofoaga mana'omia e aunoa ma le tele po'o le otaota. E oo atu i le fa masini e mafai ona filifili daisy mai le tasi uafu ki sui, pe afai e maua le 24 VDC malosi. I le isi itu, e mafai ona faʻaogaina taʻitasi i luga ole Ethernet.
QIO-L4o
O le Q-SYS L4o o se feso'ota'iga leo fa'ai'uga fa'apitoa i le Q-SYS Ecosystem, o lo'o avea o se laina e mafai ai ona fa'asoa leo fa'avae feso'otaiga. Ole mea fa'apena fa'apena e aofia ai masini fa'apipi'i i luga ole laiga e mafai ai ona fa'apipi'i fa'ata'atia ma fa'ata'atia ae o se pusa fa'ailoga e filifili e fetaui ma masini e tasi i le fa ile fa'atulagaga masani 1U sefuluiva inisi. O le fa'auala fa'agranularity o lo'o maua ai le aofa'i sa'o o feso'ota'iga leo analog i nofoaga mana'omia e aunoa ma le tele po'o le otaota. E oo atu i le fa masini e mafai ona filifili daisy mai le tasi uafu ki sui, pe afai e maua le malosi 24 VDC. I le isi itu, e mafai ona faʻaogaina taʻitasi i luga ole Ethernet.
QIO-ML2x2
O le Q-SYS ML2x2 ose feso'ota'iga leo fa'ai'uga fa'apitoa ile Q-SYS Ecosystem, o lo'o avea o se fa'aoga mic/line, mea e fa'atino ai laina, e mafai ai ona fa'asoa leo fa'avae feso'otaiga. Ole mea fa'apena fa'apena e aofia ai masini fa'apipi'i i luga ole laiga e mafai ai ona fa'apipi'i fa'ata'atia ma fa'ata'atia ae o se pusa fa'ailoga e filifili e fetaui ma masini e tasi i le fa ile fa'atulagaga masani 1U sefuluiva inisi. O le fa'auala fa'agranularity o lo'o maua ai le aofa'i sa'o o feso'ota'iga leo analog i nofoaga mana'omia e aunoa ma le tele po'o le otaota. E oo atu i le fa masini e mafai ona filifili daisy mai le tasi uafu ki sui, pe afai e maua le malosi 24 VDC. I le isi itu, e mafai ona faʻaogaina taʻitasi i luga ole Ethernet.
QIO-GP8x8
O le Q-SYS GP8x8 o se nofoaga e pulea ai fesoʻotaʻiga e faʻatatau i le Q-SYS Ecosystem, e tuʻuina atu fesoʻotaʻiga Faʻamatalaga Faʻapitoa / Faʻamatalaga (GPIO) e mafai ai e le Q-SYS fesoʻotaʻiga ona faʻafesoʻotaʻi ma masini eseese i fafo, e pei o faailoilo LED, sui, relays , ma potentiometers, ma faʻatasi ai ma faʻatonuga faʻapitoa poʻo isi vaega. Ole mea fa'apena fa'apena e aofia ai masini fa'apipi'i i luga ole laiga e mafai ai ona fa'apipi'i fa'ata'atia ma fa'ata'atia ae o se pusa fa'ailoga e filifili e fetaui ma masini e tasi i le fa ile fa'atulagaga masani 1U sefuluiva inisi. E oo atu i le fa masini e mafai ona filifili daisy mai le tasi uafu ki sui, pe afai e maua le malosi 24 VDC. I le isi itu, e mafai ona faʻaogaina taʻitasi i luga ole Ethernet.
QIO-S4
O le Q-SYS S4 o se 'upega tafa'ilagi e pulea le pito i tua o le Q-SYS Ecosystem, o lo'o avea ma alalaupapa IP-i-serial e mafai ai ona fa'asoa fa'atonuga feso'ota'iga. Ole mea fa'apena fa'apena e aofia ai masini fa'apipi'i i luga ole laiga e mafai ai ona fa'apipi'i fa'ata'atia ma fa'ata'atia ae o se pusa fa'ailoga e filifili e fetaui ma masini e tasi i le fa ile fa'atulagaga masani 1U sefuluiva inisi. E oo atu i le fa masini e mafai ona filifili daisy mai le tasi uafu ki sui, pe a maua le +24 VDC malosiaga. I le isi itu, e mafai ona faʻaogaina taʻitasi i luga ole Ethernet.
QIO-IR1x4
O le Q-SYS IR1x4 ose feso'ota'iga fa'atonu pito pito e fa'atatau i le Q-SYS Ecosystem, o lo'o avea ma alalaupapa IP-i-IR lea e mafai ai e feso'ota'iga fa'avae le tufatufaina atu o infrared. Ole mea fa'apena fa'apena e aofia ai masini fa'apipi'i i luga ole laiga e mafai ai ona fa'apipi'i fa'ata'atia ma fa'ata'atia ae o se pusa fa'ailoga e filifili e fetaui ma masini e tasi i le fa ile fa'atulagaga masani 1U sefuluiva inisi. E oo atu i le fa masini e mafai ona filifili daisy mai le tasi uafu ki sui, pe a maua le +24 VDC malosiaga. I le isi itu, e mafai ona faʻaogaina taʻitasi i luga ole Ethernet.

Malosiaga Manaomia

O le Q-SYS QIO Fa'asologa o lo'o tu'uina atu se fofo fa'aogaina e mafai ai e le tagata tu'ufa'atasi ona filifili e fa'aoga se 24 VDC eletise po'o se 802.3af Type 1 PoE PSE. Faatasi ai ma soʻo se vaifofo eletise, e tatau ona e mulimuli i faʻatonuga saogalemu mo le sapalai eletise poʻo le tui ua filifilia. Mo fa'amatalaga i le 24 VDC po'o le PoE mana'omia le sapalai eletise, va'ai i fa'amatalaga o oloa.
LAPATAIGA: Ina ia aloese mai le lamatiaga o le te'i eletise, e tatau ona feso'ota'i nei meafaigaluega i se sapalai autu ma eleele puipuia pe a fa'aogaina le eletise vasega I.
Malosiaga ile Ethernet (PoE)
FAAMANATU: E le mafai e se masini ona tu'uina atu le paoa filifili-daisy i se masini i fafo ma le Power over Ethernet. E mana'omia se sapalai fafo 24 VDC mo le fa'aogaina o le fa'aola daisy-chaining. E mafai e se masini ona maua le Ethernet daisy-chaining ma so'o se puna eletise.
24VDC Sapalai i fafo ma Daisy-Chained Devices
FAAMANATU: Pe a fa'aogaina le FG-901527-xx fa'apipi'i eletise, e o'o atu i le fa (4) masini e mafai ona fa'aola.

Fa'amatalaga ma Fua

O fa'amatalaga o oloa ma ata o fua mo QIO Endpoints e mafai ona maua ile initaneti ile www.qsc.com.

So'oga ma Va'aiga
QIO-ML4i Laupapa luma

1. LED Malosiaga – Fa'amalamalamaina le lanumoana pe a fa'aola le Q-SYS QIO-ML4i.
2. ID LED – E emo le moli lanumeamata pe a tu'u ile ID Mode e ala ile ID Button po'o le Q-SYS Configurator.
3. ID Button – Su'e le QIO-ML4i ile Q-SYS Designer Software ma le Q-SYS Configurator.
   QIO-ML4i Panela Tua

1. Ulufale Malosiaga i fafo 24 VDC 2.5 A - Mana fesoasoani, 24 VDC, 2.5 A, 2-pin Euro connector.
2.  Daisy-Chain Power Output 24 VDC 2.5 A - Mana fesoasoani, 24 VDC, 2.5 A 2-pin Euro connector.
3. LAN [PoE] - RJ-45 so'oga, 802.3af PoE Ituaiga 1 Vasega 3 mana, Q-LAN.
4. LAN [THRU] – RJ-45 so'oga, Ethernet daisy-chaining.
5. Toe setiina o masini - Faʻaaoga se kipepepe poʻo se mea faigaluega tutusa e toe faʻafoʻi ai le faʻaogaina o fesoʻotaʻiga fesoʻotaʻiga ma toe faʻaleleia tulaga le lelei o fale gaosimea. A'o le'i taumafai e toe setiina, tagai ile Q-SYS Fesoasoani mo auiliiliga.
6. Mic/Line Inputs - Fa alalaupapa, paleni pe le paleni, malosi fa'atusa - moli.

QIO-L4o Panela Luma

1. LED Malosiaga – Fa'amalamalamaina le lanumoana pe a fa'aola le Q-SYS QIO-L4o.
2. ID LED – E emo le moli lanumeamata pe a tu'u ile ID Mode e ala ile ID Button po'o le Q-SYS Configurator.
3. ID Button – Su'e le QIO-L4o ile Q-SYS Designer Software ma le Q-SYS Configurator.

QIO-L4o Fa'apito i tua

1. Malosiaga i fafo 24V DC 2.5 A - Mana fesoasoani, 24 VDC, 2.5 A, 2-pin Euro so'oga.
2. Daisy-Chain Power Output 24V DC 2.5 A - Mana fesoasoani, 24 VDC, 2.5 A 2-pin Euro connector.
3.  LAN [PoE] - RJ-45 so'oga, 802.3af PoE Ituaiga 1 Vasega 2 mana, Q-LAN.
4. LAN [THRU] – RJ-45 so'oga, Ethernet daisy-chaining.
5.  Toe setiina o masini - Faʻaaoga se kipepepe poʻo se mea faigaluega tutusa e toe faʻafoʻi ai le faʻaogaina o fesoʻotaʻiga fesoʻotaʻiga ma toe faʻaleleia tulaga le lelei o fale gaosimea. A'o le'i taumafai e toe setiina, tagai ile Q-SYS Fesoasoani mo auiliiliga.
6.  Laina Outputs - Fa alavai, paleni pe le paleni - lanu meamata.

QIO-ML2x2 Vaega i luma 

1. LED Malosiaga – Fa'amalamalamaina le lanumoana pe a fa'aola le Q-SYS QIO-ML2x2.
2. ID LED – E emo le moli lanumeamata pe a tu'u ile ID Mode e ala ile ID Button po'o le Q-SYS Configurator.
3. ID Button – Su'e le QIO-ML2x2 ile Q-SYS Designer Software ma le Q-SYS Configurator.

QIO-ML2x2 Panela Tua 

1. Malosiaga i fafo 24V DC 2.5 A - Mana fesoasoani, 24 VDC, 2.5 A, 2-pin Euro so'oga.
2. Daisy-Chain Power Output 24V DC 2.5 A - Mana fesoasoani, 24 VDC, 2.5 A 2-pin Euro connector.
3. LAN [PoE] - RJ-45 so'oga, 802.3af PoE Ituaiga 1 Vasega 3 mana, Q-LAN.
4. LAN [THRU] – RJ-45 so'oga, Ethernet daisy-chaining.
5. Toe setiina o masini - Faʻaaoga se kipepepe poʻo se mea faigaluega tutusa e toe faʻafoʻi ai le faʻaogaina o fesoʻotaʻiga fesoʻotaʻiga ma toe faʻaleleia tulaga le lelei o fale gaosimea. A'o le'i taumafai e toe setiina, tagai ile Q-SYS Fesoasoani mo auiliiliga.
6. Laina Outputs - Lua ala, paleni pe le paleni - lanu meamata.
7.  Mic/Line Inputs – Lua alalaupapa, paleni pe le paleni, malosi faanumera – moli.

QIO-GP8x8 Panela Luma

1. LED Malosiaga – Fa'amalamalamaina le lanumoana pe a fa'aola le Q-SYS QIO-GP8x8.
2. ID LED – E emo le moli lanumeamata pe a tu'u ile ID Mode e ala ile ID Button po'o le Q-SYS Configurator.
3. ID Button – Su'e le QIO-GP8x8 ile Q-SYS Designer Software ma le Q-SYS Configurator.

QIO-GP8x8 Panela Tua

1. Malosiaga i fafo 24V DC 2.5 A - Mana fesoasoani, 24 VDC, 2.5 A, 2-pin Euro so'oga.
2. Daisy-Chain Power Output 24V DC 2.5 A - Mana fesoasoani, 24 VDC, 2.5 A 2-pin Euro connector.
3. LAN [PoE] - RJ-45 so'oga, 802.3af PoE Ituaiga 1 Vasega 3 mana, Q-LAN.
4. LAN [THRU] – RJ-45 so'oga, Ethernet daisy-chaining.
5. Toe setiina o masini - Faʻaaoga se kipepepe poʻo se mea faigaluega tutusa e toe faʻafoʻi ai le faʻaogaina o fesoʻotaʻiga fesoʻotaʻiga ma toe faʻaleleia tulaga le lelei o fale gaosimea. A'o le'i taumafai e toe setiina, tagai ile Q-SYS Fesoasoani mo auiliiliga.
6. 12V DC .1A I fafo - Mo le faʻaaogaina ma Faʻamatalaga Lautele Faʻaoga ma Faʻamatalaga (GPIO). Fa'aoga pine feso'ota'i uliuli 1 ma le 11 (e le faanumera).
7. GPIO Inputs - 8 inputs, 0-24V analog input, numera numera, poʻo faʻafesoʻotaʻi tapunia (Pins faʻailoga 1-8 tutusa pine 1-8 i le Q-SYS Designer Software GPIO Input component). Fa'atonu toso i luga i le +12V.
8. Fa'ailoga Eleele - Mo le fa'aoga ma le GPIO. Fa'aaogā pine fa'afeso'ota'i uliuli 10 ma le 20 (e le faanumera).
9.  GPIO Outputs – 8 outputs, tatala le aoina (24V, 0.2A sink le maualuga) ma toso i luga i le +3.3V (Pins fa'ailoga 1-8 tutusa pine 1-8 i le Q-SYS Designer Software GPIO Output component).

QIO-S4 Laupapa luma

1. LED Malosiaga – Fa'amalamalamaina le lanumoana pe a fa'aola le Q-SYS QIO-S4.
2. ID LED – E emo le moli lanumeamata pe a tu'u ile ID Mode e ala ile ID Button po'o le Q-SYS Configurator.
3.  ID Button – Su'e le QIO-S4 ile Q-SYS Designer Software ma le Q-SYS Configurator.

QIO-S4 Fa'asaga i tua

1. Malosiaga i fafo 24V DC 2.5 A - Mana fesoasoani, 24 VDC, 2.5 A, 2-pin Euro so'oga.
2. Daisy-Chain Power Output 24V DC 2.5 A - Mana fesoasoani, 24 VDC, 2.5 A 2-pin Euro connector.
3. LAN [PoE] - RJ-45 so'oga, 802.3af PoE Ituaiga 1 Vasega 1 mana, Q-LAN.
4. LAN [THRU] – RJ-45 so'oga, Ethernet daisy-chaining.
5. Toe setiina o masini - Faʻaaoga se kipepepe poʻo se mea faigaluega tutusa e toe faʻafoʻi ai le faʻaogaina o fesoʻotaʻiga fesoʻotaʻiga ma toe faʻaleleia tulaga le lelei o fale gaosimea. A'o le'i taumafai e toe setiina, tagai ile Q-SYS Fesoasoani mo auiliiliga.
6. COM 1 Serial Port – Configurable i Q-SYS Designer Software mo RS232, RS485 Half-Duplex TX, RS485 Half-Duplex RX, poʻo RS485/422 Full Duplex. Va'ai “QIO-S4 Serial Port Pinouts” i le itulau 14.
7. COM 2, COM 3, COM 4 Serial Ports - Faʻapitoa i fesoʻotaʻiga RS232. Va'ai “QIO-S4 Serial Port Pinouts” i le itulau 14.

QIO-S4 Serial Port Pinouts
O le QIO-S4 o loʻo faʻaalia ai ports e fa:

• O le COM 1 e mafai ona faʻaogaina i le Q-SYS Designer Software mo RS232, RS485 Half Duplex TX, RS485 Half Duplex RX, poʻo
  RS485/422 Full Duplex.
• COM 2-4 ports ua tuʻuina atu i le RS232 fesoʻotaʻiga.

RS232 Pinout: COM 1 (Configurable), COM 2-4 (Fa'apa'ia) 

Pin	Fa'ailoga Fa'ailoga	Fa'amatalaga
	N/A	Eleele faailo
TX	Tuuina atu	Fa'asalalau fa'amatalaga
RX	Ulufale	Maua faʻamatalaga
RTS	Tuuina atu	Sauni e lafo'
CTS	Ulufale	Fa'amanino e lafo'

1.  Pe a fa'aogaina le fa'atonuga o le tafega o meafaigaluega.

RS485 Half Duplex TX po'o RX Pinout: COM 1 (Fa'atonu)

Pin	Fa'ailoga Fa'ailoga	Fa'amatalaga
	N/A	Eleele faailo
TX	Ulufale/Auga	Eseese B-
RX	(Le fa'aaogaina)	(Le fa'aaogaina)
RTS	Ulufale/Auga	Eseesega A+
CTS	(Le fa'aaogaina)	(Le fa'aaogaina)

RS485/422 Full Duplex: COM 1 (Fa'atonu)

Pin	Fa'ailoga Fa'ailoga	Fa'amatalaga
	N/A	Eleele faailo
TX	Tuuina atu	Eseesega Z- / Tx-
RX	Ulufale	Eseese A+ / Rx+
RTS	Tuuina atu	Eseese Y+ / Tx+
CTS	Ulufale	Eseese B- / Rx-

QIO-IR1x4 Laupapa luma

1. LED Malosiaga – Fa'amalamalamaina le lanumoana pe a fa'aola le Q-SYS QIO-IR1x4.
2. ID LED – E emo le moli lanumeamata pe a tu'u ile ID Mode e ala ile ID Button po'o le Q-SYS Configurator.
3. ID Button – Su'e le QIO-IR1x4 ile Q-SYS Designer Software ma le Q-SYS Configurator.

QIO-IR1x4 Fa'apito i tua

1. Malosiaga i fafo 24V DC 2.5 A - Mana fesoasoani, 24 VDC, 2.5 A, 2-pin Euro so'oga.
2. Daisy-Chain Power Output 24V DC 2.5 A - Mana fesoasoani, 24 VDC, 2.5 A 2-pin Euro connector.
3. LAN [PoE] - RJ-45 so'oga, 802.3af PoE Ituaiga 1 Vasega 1 mana, Q-LAN.
4. LAN [THRU] – RJ-45 so'oga, Ethernet daisy-chaining.
5.  Toe setiina o masini - Faʻaaoga se kipepepe poʻo se mea faigaluega tutusa e toe faʻafoʻi ai le faʻaogaina o fesoʻotaʻiga fesoʻotaʻiga ma toe faʻaleleia tulaga le lelei o fale gaosimea. A'o le'i taumafai e toe setiina, tagai ile Q-SYS Fesoasoani mo auiliiliga.
6.  IR SIG LEDS – Fa'ailoa gaioioiga fe'avea'i mo CH/IR Output 1-4.
7. IR Outputs – Fa'atonu ile Q-SYS Designer Software pei ole IR po'o le Serial RS232. Va'ai “QIO-IR1x4 IR Port Pinouts” i le itulau 16.
8. IR Input - Tuuina atu le 3.3VDC ma maua faʻamatalaga IR. Va'ai “QIO-IR1x4 IR Port Pinouts” i le itulau 16.

QIO-IR1x4 IR Port Pinouts
O le QIO-IR1x4 o loʻo faʻaalia ai faʻamatalaga IR e fa ma le tasi faʻaoga IR:

• O mea e fai 1-4 e mafai ona fa'atulagaina ile Q-SYS Designer Software mo le IR po'o le Serial RS232 mode.
• Fa'aulu e maua ai le 3.3VDC ma maua fa'amatalaga IR.

IR Vaega 1-4: IR Mode Pinout 

Pin	Fa'ailoga Fa'ailoga	Fa'amatalaga
SIG	Tuuina atu	IR faʻasalalau faʻamatalaga
	N/A	Fa'asinoga fa'ailoga

IR Galuega Fa'atino 1-4: Fa'asologa RS232 Fa'asologa Pinout

Pin	Fa'ailoga Fa'ailoga	Fa'amatalaga
SIG	Tuuina atu	RS232 fa'asalalau fa'amatalaga
	N/A	Fa'asinoga fa'ailoga

IR Input Pinout

Pin	Fa'ailoga Fa'ailoga	Fa'amatalaga
SIG	Ulufale	IR maua faʻamatalaga
+	Tuuina atu	3.3VDC
	N/A	Fa'asinoga fa'ailoga

Fa'apipi'i Fa'amau

Q-SYS QIO Fa'ai'uga ua mamanuina e fa'ae'e i totonu o se fata fa'amaufa'ailoga masani e fa'aaoga ai le fata fata Q-SYS 1RU (FG-901528-00). O le fata
fata e ofi i le fa QIO Endpoint iunite o so'o se oloa umi.
Meafaigaluega Fata Fata 

Fa'apipi'i le Kilipi Taofi
Mo QIO Endpoint ta'itasi o lo'o e fa'apipi'iina i totonu o le fata, fa'aofi ma fa'apipi'i se kilipa fa'amau i totonu o le nofoaga pu'upu'u po'o le umi-umi e fa'aaoga ai se sikulima ulu mafolafola.

Fa'apipi'i le QIO Endpoints ma Papatusi avanoa
Fa'ase'e ia QIO Endpoint i totonu o se kilipa taofi. Fa'apipi'i iunite ta'itasi ma fa'asiuulu ulu mafolafola se lua. Fa'apipi'i ipu fa'ato'a avanoa, ta'itasi ma fa'a sikulu ulu mafolafola se lua.
FAAMANATU: O papatusi avanoa e filifili ma e mafai ona faʻaoga e faʻafaigofie ai le faʻafefe o le ea. E mafai ona fa'apipi'i i tua o le fata pe a mana'omia, e pei ona fa'aalia.

Fa'apipi'i luga o le Mauga

Ole QIO Endpoints e mafai foi ona faʻapipiʻi i lalo ole laulau, luga ole laulau, poʻo luga ole puipui. Mo so'o se mea fa'apipi'i, fa'aoga le fa'amau fa'apipi'i i luga ma fa'amau fa'apa ulu o lo'o aofia ai ma le pusa va'a QIO Endpoint. O puipui e tutusa lelei e fa'aoga ai le fa'apipi'i i le itu taumatau e o'o i luga o le fa'asaga i le eleele.
FAAMANATU: O fa'amau mo le fa'apipi'iina o le fa'amau i luga o le fa'aaliga o lo'o fa'atusalia o se fa'aa'iample ae le tuuina atu.

Faʻapipiʻi faʻapitoa

Mo le fa'apipi'i tu'ufua i luga o le laulau, fa'apipi'i fa'alava foam fa'apipi'i ile pito i lalo ole iunite.

QSC Self Help Portal
Faitau tala ma talanoaga faavae malamalama, download polokalama ma firmware, view pepa o oloa ma vitio aoaoga, ma faia mataupu lagolago.
https://qscprod.force.com/selfhelpportal/s/
Lagolago Tagata Fa'atau
Va'ai ile itulau Fa'afeso'ota'i matou ile QSC webnofoaga mo Fesoasoani Fa'atekinisi ma Tausiga Tagata Fa'atau, e aofia ai a latou numera telefoni ma itula o fa'agaioiga.
https://www.qsc.com/contact-us/
Fa'amaonia
Mo se kopi o le QSC Limited Warranty, asiasi ile QSC, LLC., webnofoaga i www.qsc.com.

© 2022 QSC, LLC. Ua taofia aia tatau uma. QSC ma le QSC logo, Q-SYS, ma le Q-SYS logo o faʻailoga faʻamaufaʻailoga a le QSC, LLC i le US Patent ma
Ofisa o Fefa'ataua'iga ma isi atunu'u. E mafai ona fa'aoga pateni pe o lo'o fa'atali. O isi fa'ailoga tau fefa'ataua'iga uma o meatotino a latou tagata e ona.
www.qsc.com/patent

Pepa / Punaoa

QSC QIO-GP8x8 QIO Fa'asologa o Feso'otaiga Pulea Fa'aulufalega po'o Fa'alautele Fa'aola [pdf] Tusi Taiala QIO-ML4i, QIO-L4o, QIO-ML2x2, QIO-GP8x8, QIO-S4, QIO-IR1x4, QIO Fa'asologa, Fa'atonuga o Fesootaiga po'o Fa'aulufale Fa'alautele, QIO Fa'asologa o Feso'ota'iga Pulea Fa'aulu po'o Fa'aulufalega Fa'alautele, QIO-GP8x8 QIO Fa'asologa o Fesootaiga Pulea Fa'aulufalega po'o Fa'aulufale Fa'alautele

Fa'asinomaga

• Tusi Taiala