Buka ea mosebelisi ea Hardware
QIO Series Network Audio I/O Expander: QIO-ML4i, QIO-L4o, QIO-ML2x2
QIO Series Network Control I/O Expander: QIO-GP8x8, QIO-S4, QIO-IR1x4

TLHALOSO EA MELAO LE MATŠOANTŠO
Kotara “TEMOSO” e bontša litaelo mabapi le polokeho ea motho. Ho hlōleha ho li latela ho ka fella ka kotsi 'meleng kapa lefu.
Kotara “TEMOHO” e bontša litaelo mabapi le tšenyo e ka bang teng thepa ea 'mele. Ho hlōleha ho li latela ho ka baka tšenyo ea thepa ho thepa e ka 'nang ea se ke ea koaheloa tlas'a tiisetso.
Kotara “BOHLOKOA” e bontša litaelo kapa tlhahisoleseding e bohlokoa ho phethoa ka katleho ha mokhoa.
Kotara "HLOKOMELA" e bontša lintlha tse ling tse molemo.
Lehlaseli la lehalima le nang le letšoao la hlooho ea motsu ho kgutlotharo le hlokomedisa mosebedisi ka boteng ba vollumo e kotsi e sa keneng.tage ka har'a sebaka se kampetsoeng sa sehlahisoa se ka bakang kotsi ea ho tsosoa ke motlakase ho batho.
Makalo ka har'a khutlotharo e hlokomelisa mosebelisi ka litaelo tsa bohlokoa tsa polokeho, ts'ebetso le tlhokomelo bukeng ena.

BOHLOKOA POLOKETSO LITAELO

TEMOSO!: HO THIBELA MOLLO KAPA TŠITISO EA MOTLOTLO, U SE KE UA IPETSA SESEBETSI ENA HO PULELA KAPA MONGOLA.

• Sebaka se Phahameng sa Ts'ebetso - Haeba se kentsoe ka har'a kopano ea rack e koetsoeng kapa e nang le mefuta e mengata, mocheso o sebetsang oa tikoloho ea rack o ka ba moholo ho feta sebaka sa kamore. Ho lokela ho nahanoa ka ho etsa bonnete ba hore mocheso o phahameng ka ho fetisisa oa ho sebetsa (0 ° C ho 50 ° C (32 ° F ho 122 ° F ) ha o fetele. Leha ho le joalo, haeba u kenya GP8x8 kopanong ea li-rack tse ngata tse nang le li-unit ho tsohle. mahlakoreng, mocheso o phahameng oa ho sebetsa ha oa lokela ho feta 40 ° C ha lisebelisoa li behoa ka holimo kapa ka tlase.
• Phokotso ea Phallo ea Moea - Ho kenngoa ha thepa ka har'a rack e lokela ho ba joalo e le hore palo ea moea e hlokahalang bakeng sa ts'ebetso e sireletsehileng ea lisebelisoa e se ke ea senyeha.

1. Bala litaelo tsena.
2. Boloka litaelo tsena.
3. Mamela litemoso tsohle.
4. Latela litaelo tsohle.
5. Se ke oa sebelisa sesebelisoa sena haufi le metsi.
6. Se ke oa kenya lisebelisoa ka metsing kapa maro.
7. Se ke oa sebelisa setlolo sefe kapa sefe sa aerosol, sehloekisi, sebolaea likokoana-hloko kapa sefumigant holim'a, haufi kapa ka har'a sesebelisoa.
8. Hloekisa feela ka lesela le omeletseng.
9. Se ke oa thibela ho buleha ha moea. Kenya ho latela litaelo tsa moetsi.
10. Boloka menyako eohle ea moea e se na lerōle kapa lintho tse ling.
11. Se ke oa kenya haufi le mehloli efe kapa efe ea mocheso joalo ka li-radiator, lirejista tsa mocheso, litofo, kapa lisebelisoa tse ling (ho kenyeletsoa amplifiers) tse hlahisang mocheso.
12. Se ke oa hakolla thapo ka ho hula thapo, sebelisa polaka.
13. Sebelisa feela liphutheloana/lisebelisoa tse boletsoeng ke moetsi.
14. Tlosa sesebelisoa sena nakong ea sefefo sa lehalima kapa ha se sa sebelisoe ka nako e telele.
15. Fetisetsa litšebeletso tsohle ho basebetsi ba tšoanelehang ba litšebeletso. Ho sebetsa ho hlokahala ha lisebelisoa li senyehile ka tsela efe kapa efe, joalo ka mokelikeli o tšolotsoeng kapa lintho li oetse ka har'a lisebelisoa, lisebelisoa li pepesitsoe ke pula kapa mongobo, ha li sebetse ka mokhoa o tloaelehileng, kapa li oele.
16. Khomarela likhoutu tsohle tse sebetsang, tsa lehae.
17. Ikopanye le moenjineri ea nang le laesense, ea litsebi ha ho hlaha lipelaelo kapa lipotso mabapi le ho kenya thepa ea 'mele.

Tlhokomelo le Tokiso

TLHOKOMELISO: Theknoloji e tsoetseng pele, mohlala, tšebeliso ea lisebelisoa tsa morao-rao le lisebelisoa tsa elektronike tse matla, li hloka mekhoa e khethehileng ea tlhokomelo le tokiso. Ho qoba kotsi ea tšenyo e latelang ea lisebelisoa, likotsi ho batho le/kapa ho thehoa ha likotsi tse eketsehileng tsa polokeho, mosebetsi oohle oa ho lokisa kapa oa ho lokisa lisebelisoa o lokela ho etsoa feela ke setsi sa litšebeletso se lumelletsoeng ke QSC kapa mofani ea lumelletsoeng oa QSC International Distributor. QSC ha e ikarabelle bakeng sa kotsi efe kapa efe, kotsi kapa tšenyo e amanang le eona e bakoang ke ho hloleha hofe kapa hofe ha moreki, mong'a sesebelisoa kapa mosebelisi oa lisebelisoa ho thusa litokiso tseo.
BOHLOKOA! PoE Power Input - IEEE 802.3af Type 1 PSE e hlokehang ho LAN (POE) kapa 24 VDC phepelo ea motlakase e hlokahalang.
Phatlalatso ea FCC
Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa A, ho latela Karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi ha thepa e sebelisoa sebakeng sa khoebo. Thepa ena e hlahisa, e sebelisa, 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela bukana ea litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Ho sebetsa ha thepa ena sebakeng sa bolulo ho ka 'na ha baka tšitiso e kotsi moo mosebedisi a tla hlokoa ho lokisa tšitiso eo ka litšenyehelo tsa hae.

Tikoloho

• Nako e Lebeletsoeng ea Bophelo ba Sehlahisoa: lilemo tse 10
• Boemo ba Mocheso oa polokelo: -20 ° C ho + 70 ° C
• Mongobo o Batlang: 5 ho isa ho 85% RH, o sa fokotseheng

Tlhaloso ea RoHS
Q-SYS QIO Endpoints e lumellana le European Directive 2015/863/EU - Restriction of Hazardous Substances (RoHS).
Q-SYS QIO Endpoints e latela litaelo tsa "China RoHS" ka GB/T24672. Chate e latelang e fanoe bakeng sa tšebeliso ea sehlahisoa Chaena le libaka tsa eona:

	QSC Q-SYS 010 lintlha tsa ho qetela
(Lebitso la Karolo)	(Lintho tse Kotsi)
	(Pb)	(HG)	(Cd)	(Kr (vi))	(PBB)	(PBDE)
(Likopano tsa PCB)	X	0	0	0	0	0
(Chassis Likopano)	X	0	0	0	0	0

EA-11364
O: GB / T 26572
X: GB/T 26572.
Tafole ena e lokiselitsoe ho latela tlhoko ea SJ/T 11364.
O: E bonts'a hore mahloriso a ntho ho lisebelisoa tsohle tse homogeneous tsa karolo e ka tlase ho moeli o nepahetseng o boletsoeng ho GB/T 26572.
X: E bonts'a hore bongata ba ntho bonyane ho e 'ngoe ea lisebelisoa tsohle tse homogeneous tsa karolo e kaholimo ho moeli o boletsoeng ho GB/T 26572.
(Ho ke ke ha finyelloa sebaka le phokotso ea litaba hajoale ka lebaka la mabaka a tekheniki kapa a moruo.)

Se ka Lebokoseng 

QIO-ML2x2

Selelekela

Q-SYS QIO Series e fana ka lihlahisoa tse ngata tse ka sebeletsang merero e mengata ea molumo le taolo.
QIO-ML4i
Q-SYS ML4i ke sebaka sa ho qetela sa molumo oa marang-rang ho Q-SYS Ecosystem, e sebetsang e le kenyelletso ea mic/line e nolofalletsang ho ajoa ha molumo o thehiloeng marang-rang. The compact form factor e kenyelletsa lisebelisoa tse holimo tse lumellang ho hlongoa ka masene le ka maano ha kit ea boikhethelo ea rack e lekana sesebelisoa se le seng ho isa ho tse 'ne ka sebopeho se tloaelehileng sa 1U-inch tse leshome le metso e robong. Granularity ea likanale tse 'ne e fumana palo e nepahetseng ea khokahanyo ea molumo oa analoge libakeng tse batloang ntle le bongata kapa litšila. Lisebelisoa tse fihlang ho tse 'ne li ka koalloa ka ketane ho tloha koung e le' ngoe ea phihlello, ha feela 24 VDC e fumaneha. Ntle le moo, e 'ngoe le e' ngoe e ka tsamaisoa ka bonngoe holim'a Ethernet.
QIO-L4o
Q-SYS L4o ke sebaka sa ho qetela sa molumo oa marang-rang ho Q-SYS Ecosystem, e sebetsang e le tlhahiso ea mohala e nolofalletsang kabo ea molumo e thehiloeng marang-rang. The compact form factor e kenyelletsa lisebelisoa tse holimo tse lumellang ho hlongoa ka masene le ka maano ha kit ea boikhethelo ea rack e lekana sesebelisoa se le seng ho isa ho tse 'ne ka sebopeho se tloaelehileng sa 1U-inch tse leshome le metso e robong. Granularity ea likanale tse 'ne e fumana palo e nepahetseng ea khokahanyo ea molumo oa analoge libakeng tse batloang ntle le bongata kapa litšila. Lisebelisoa tse fihlang ho tse 'ne li ka koalloa ka ketane ho tloha koung e le' ngoe ea phihlello, ha feela 24 VDC e fumaneha. Ntle le moo, e 'ngoe le e' ngoe e ka tsamaisoa ka bonngoe holim'a Ethernet.
QIO-ML2x2
Q-SYS ML2x2 ke sebaka sa ho qetela sa molumo oa marang-rang ho Q-SYS Ecosystem, e sebetsang e le mic / line input, line output device, e nolofalletsang kabo ea molumo e thehiloeng marang-rang. The compact form factor e kenyelletsa lisebelisoa tse holimo tse lumellang ho hlongoa ka masene le ka maano ha kit ea boikhethelo ea rack e lekana sesebelisoa se le seng ho isa ho tse 'ne ka sebopeho se tloaelehileng sa 1U-inch tse leshome le metso e robong. Granularity ea likanale tse 'ne e fumana palo e nepahetseng ea khokahanyo ea molumo oa analoge libakeng tse batloang ntle le bongata kapa litšila. Lisebelisoa tse fihlang ho tse 'ne li ka koalloa ka ketane ho tloha koung e le' ngoe ea phihlello, ha feela 24 VDC e fumaneha. Ntle le moo, e 'ngoe le e' ngoe e ka tsamaisoa ka bonngoe holim'a Ethernet.
QIO-GP8x8
Q-SYS GP8x8 ke sebaka sa ho qetela sa taolo ea marang-rang ho Q-SYS Ecosystem, e fana ka likhokahano tsa General Purpose Input/Output (GPIO) tse lumellang marang-rang a Q-SYS ho hokahana le lisebelisoa tse fapaneng tse kantle, joalo ka matšoao a LED, li-switches, li-relay. , le potentiometers, le ka taolo ea tloaelo kapa ea motho oa boraro. The compact form factor e kenyelletsa lisebelisoa tse holimo tse lumellang ho hlongoa ka masene le ka maano ha kit ea boikhethelo ea rack e lekana sesebelisoa se le seng ho isa ho tse 'ne ka sebopeho se tloaelehileng sa 1U-inch tse leshome le metso e robong. Lisebelisoa tse fihlang ho tse 'ne li ka koalloa ka ketane ho tloha koung e le' ngoe ea phihlello, ha feela 24 VDC e fumaneha. Ntle le moo, e 'ngoe le e' ngoe e ka tsamaisoa ka bonngoe holim'a Ethernet.
QIO-S4
Q-SYS S4 ke sebaka sa taolo ea marang-rang se hlahang ho Q-SYS Ecosystem, e sebetsang e le borokho ba IP-to-serial bo nolofalletsang ho ajoa ha taolo ea marang-rang. The compact form factor e kenyelletsa lisebelisoa tse holimo tse lumellang ho hlongoa ka masene le ka maano ha kit ea boikhethelo ea rack e lekana sesebelisoa se le seng ho isa ho tse 'ne ka sebopeho se tloaelehileng sa 1U-inch tse leshome le metso e robong. Lisebelisoa tse fihlang ho tse 'ne li ka tlamisoa ka ketane ho tloha koung e le' ngoe ea phihlello, ha feela matla a +24 VDC a fumaneha. Ntle le moo, e 'ngoe le e' ngoe e ka tsamaisoa ka bonngoe holim'a Ethernet.
QIO-IR1x4
Q-SYS IR1x4 ke sebaka sa ho qetela sa taolo ea marang-rang ho Q-SYS Ecosystem, e sebetsang e le borokho ba IP-to-IR bo nolofalletsang kabo ea taolo ea infrared e thehiloeng marang-rang. The compact form factor e kenyelletsa lisebelisoa tse holimo tse lumellang ho hlongoa ka masene le ka maano ha kit ea boikhethelo ea rack e lekana sesebelisoa se le seng ho isa ho tse 'ne ka sebopeho se tloaelehileng sa 1U-inch tse leshome le metso e robong. Lisebelisoa tse fihlang ho tse 'ne li ka tlamisoa ka ketane ho tloha koung e le' ngoe ea phihlello, ha feela matla a +24 VDC a fumaneha. Ntle le moo, e 'ngoe le e' ngoe e ka tsamaisoa ka bonngoe holim'a Ethernet.

Litlhoko tsa Matla

Q-SYS QIO Series e fana ka tharollo ea matla e feto-fetohang e lumellang motlatsi ho khetha ho sebelisa motlakase oa 24 VDC kapa 802.3af Type 1 PoE PSE. Ka tharollo ea motlakase, o tlameha ho latela litaelo tsa polokeho bakeng sa phepelo e khethehileng ea motlakase kapa ente e khethiloeng. Bakeng sa lintlha tse mabapi le litlhoko tsa phepelo ea motlakase ea 24 VDC kapa PoE, sheba lintlha tsa sehlahisoa.
TLHOKOMELISO: Ho qoba kotsi ea ho tsosoa ke motlakase, sesebelisoa sena se tlameha ho hokahanngoa feela le setsi sa phepelo se nang le lefatše le sireletsang ha se sebelisa matla a sehlopha sa I.
Matla holim'a Ethernet (PoE)
HLOKOMELA: Sesebelisoa se ke ke sa fana ka matla a ketane ea daisy ho sesebelisoa sa kantle se nang le Power over Ethernet. Ho hlokahala phepelo ea kantle ea 24 VDC bakeng sa lits'ebetso tsa motlakase tsa daisy-chaining. Sesebelisoa se ka fana ka Ethernet daisy-chaining ka mohloli ofe kapa ofe oa matla.
24VDC External Supply and Daisy-Chained Devices
HLOKOMELA: Ha o sebelisa phepelo ea motlakase ea FG-901527-xx, lisebelisoa tse fihlang ho tse 'ne (4) li ka tsamaisoa.

Litlhaloso le Litekanyo

Litlhaloso tsa sehlahisoa le metako ea boholo bakeng sa QIO Endpoints li ka fumaneha inthaneteng ho www.qsc.com.

Lihokelo le Mehala
QIO-ML4i karolo e ka pele

1. Power LED - E khantša boputsoa ha Q-SYS QIO-ML4i e buletsoe.
2. ID ea LED - LED e panya ka botala ha e behiloe ho Mokhoa oa ID ka Konopo ea ID kapa Q-SYS Configurator.
3. Konopo ea ID - E beha QIO-ML4i ho Q-SYS Designer Software le Q-SYS Configurator.
   QIO-ML4i Karolo e ka morao

1. Kenyelletso ea Matla a Kantle 24 VDC 2.5 A - Matla a thusang, 24 VDC, 2.5 A, 2-pin Euro connector.
2.  Daisy-Chain Power Output 24 VDC 2.5 A - Matla a thusang, 24 VDC, 2.5 A 2-pin Euro connector.
3. LAN [PoE] - RJ-45 sehokelo, 802.3af PoE Mofuta oa 1 Sehlopha sa 3 matla, Q-LAN.
4. LAN [THRU] - sehokelo sa RJ-45, Ethernet daisy-chaining.
5. Reset ea Sesebelisoa - Sebelisa paperclip kapa sesebelisoa se ts'oanang ho khutlisetsa litlhophiso tsa marang-rang tsa kamehla le ho khutlisa litlhophiso tsa kamehla tsa feme. Pele o leka ho seta bocha, sheba ho Thuso ea Q-SYS bakeng sa lintlha.
6. Lisebelisoa tsa Mic / Line - Likanale tse 'nè, tse leka-lekaneng kapa tse sa leka-lekaneng, matla a phantom - lamunu.

QIO-L4o karolo e ka pele

1. Power LED - E khantša boputsoa ha Q-SYS QIO-L4o e buletsoe.
2. ID ea LED - LED e panya ka botala ha e behiloe ho Mokhoa oa ID ka Konopo ea ID kapa Q-SYS Configurator.
3. Konopo ea ID - E beha QIO-L4o ho Q-SYS Designer Software le Q-SYS Configurator.

QIO-L4o Karolo e ka morao

1. Kenyelletso ea Matla a Kantle 24V DC 2.5 A - Matla a thusang, 24 VDC, 2.5 A, 2-pin Euro connector.
2. Daisy-Chain Power Output 24V DC 2.5 A - Matla a thusang, 24 VDC, 2.5 A 2-pin Euro connector.
3.  LAN [PoE] - RJ-45 sehokelo, 802.3af PoE Mofuta oa 1 Sehlopha sa 2 matla, Q-LAN.
4. LAN [THRU] - sehokelo sa RJ-45, Ethernet daisy-chaining.
5.  Reset ea Sesebelisoa - Sebelisa paperclip kapa sesebelisoa se ts'oanang ho khutlisetsa litlhophiso tsa marang-rang tsa kamehla le ho khutlisa litlhophiso tsa kamehla tsa feme. Pele o leka ho seta bocha, sheba ho Thuso ea Q-SYS bakeng sa lintlha.
6.  Litholoana tsa Line - Likanale tse 'nè, tse leka-lekaneng kapa tse sa tsitsang - tse tala.

QIO-ML2x2 karolo e ka pele 

1. Power LED - E khantša boputsoa ha Q-SYS QIO-ML2x2 e buletsoe.
2. ID ea LED - LED e panya ka botala ha e behiloe ho Mokhoa oa ID ka Konopo ea ID kapa Q-SYS Configurator.
3. Konopo ea ID - E beha QIO-ML2x2 ho Q-SYS Designer Software le Q-SYS Configurator.

QIO-ML2x2 Karolo e ka morao 

1. Kenyelletso ea Matla a Kantle 24V DC 2.5 A - Matla a thusang, 24 VDC, 2.5 A, 2-pin Euro connector.
2. Daisy-Chain Power Output 24V DC 2.5 A - Matla a thusang, 24 VDC, 2.5 A 2-pin Euro connector.
3. LAN [PoE] - RJ-45 sehokelo, 802.3af PoE Mofuta oa 1 Sehlopha sa 3 matla, Q-LAN.
4. LAN [THRU] - sehokelo sa RJ-45, Ethernet daisy-chaining.
5. Reset ea Sesebelisoa - Sebelisa paperclip kapa sesebelisoa se ts'oanang ho khutlisetsa litlhophiso tsa marang-rang tsa kamehla le ho khutlisa litlhophiso tsa kamehla tsa feme. Pele o leka ho seta bocha, sheba ho Thuso ea Q-SYS bakeng sa lintlha.
6. Litholoana tsa Line - Likanale tse peli, tse leka-lekaneng kapa tse sa leka-lekaneng - tse tala.
7.  Litlhahiso tsa Mic / Line - Likanale tse peli, tse leka-lekaneng kapa tse sa tsitsang, matla a phantom - lamunu.

QIO-GP8x8 Phanele e ka pele

1. Power LED - E khantša boputsoa ha Q-SYS QIO-GP8x8 e buletsoe.
2. ID ea LED - LED e panya ka botala ha e behiloe ho Mokhoa oa ID ka Konopo ea ID kapa Q-SYS Configurator.
3. Konopo ea ID - E beha QIO-GP8x8 ho Q-SYS Designer Software le Q-SYS Configurator.

QIO-GP8x8 Karolo e ka morao

1. Kenyelletso ea Matla a Kantle 24V DC 2.5 A - Matla a thusang, 24 VDC, 2.5 A, 2-pin Euro connector.
2. Daisy-Chain Power Output 24V DC 2.5 A - Matla a thusang, 24 VDC, 2.5 A 2-pin Euro connector.
3. LAN [PoE] - RJ-45 sehokelo, 802.3af PoE Mofuta oa 1 Sehlopha sa 3 matla, Q-LAN.
4. LAN [THRU] - sehokelo sa RJ-45, Ethernet daisy-chaining.
5. Reset ea Sesebelisoa - Sebelisa paperclip kapa sesebelisoa se ts'oanang ho khutlisetsa litlhophiso tsa marang-rang tsa kamehla le ho khutlisa litlhophiso tsa kamehla tsa feme. Pele o leka ho seta bocha, sheba ho Thuso ea Q-SYS bakeng sa lintlha.
6. 12V DC .1A Out - Bakeng sa ho sebelisoa le Litlhahiso le Liphello tsa Sepheo Kakaretso (GPIO). E sebedisa sehokedi se ntsho sa 1 le 11 (ha se na dinomoro).
7. GPIO Inputs – 8 inputs, 0-24V analog input, digital input, kapa ho koala mabitso (Lithakhisa tse ngotsoeng 1–8 liphini tse lekanang 1–8 karolong ea Q-SYS Designer Software GPIO Input). E ka hlophisoang e hula ho fihla ho +12V.
8. Signal Ground - Bakeng sa tšebeliso le GPIO. E sebedisa sehokedi se ntsho sa 10 le 20 (ha se na dinomoro).
9.  GPIO Outputs – 8 outputs, open collector (24V, 0.2A sink maximum) e hulela holimo ho +3.3V (Lithakhisa tse ngotsoeng 1–8 lipini tse lekanang 1–8 karolong ea Q-SYS Designer Software GPIO Output).

QIO-S4 karolo e ka pele

1. Power LED - E khantša boputsoa ha Q-SYS QIO-S4 e buletsoe.
2. ID ea LED - LED e panya ka botala ha e behiloe ho Mokhoa oa ID ka Konopo ea ID kapa Q-SYS Configurator.
3.  Konopo ea ID - E beha QIO-S4 ho Q-SYS Designer Software le Q-SYS Configurator.

QIO-S4 Karolo e ka morao

1. Kenyelletso ea Matla a Kantle 24V DC 2.5 A - Matla a thusang, 24 VDC, 2.5 A, 2-pin Euro connector.
2. Daisy-Chain Power Output 24V DC 2.5 A - Matla a thusang, 24 VDC, 2.5 A 2-pin Euro connector.
3. LAN [PoE] - RJ-45 sehokelo, 802.3af PoE Mofuta oa 1 Sehlopha sa 1 matla, Q-LAN.
4. LAN [THRU] - sehokelo sa RJ-45, Ethernet daisy-chaining.
5. Reset ea Sesebelisoa - Sebelisa paperclip kapa sesebelisoa se ts'oanang ho khutlisetsa litlhophiso tsa marang-rang tsa kamehla le ho khutlisa litlhophiso tsa kamehla tsa feme. Pele o leka ho seta bocha, sheba ho Thuso ea Q-SYS bakeng sa lintlha.
6. COM 1 Serial Port - Configurable ho Q-SYS Designer Software bakeng sa RS232, RS485 Half-Duplex TX, RS485 Half-Duplex RX, kapa RS485/422 Full Duplex. Sheba "QIO-S4 Serial Port Pinouts" leqepheng la 14.
7. COM 2, COM 3, COM 4 Serial Ports – E inehetseng ho RS232 puisano. Sheba "QIO-S4 Serial Port Pinouts" leqepheng la 14.

QIO-S4 Serial Port Pinouts
QIO-S4 e na le likou tse 'ne tsa serial:

• COM 1 e ka hlophisoa ho Q-SYS Designer Software bakeng sa RS232, RS485 Half Duplex TX, RS485 Half Duplex RX, kapa
  RS485/422 Duplex e felletseng.
• Likou tsa COM 2-4 li nehetsoe puisanong ea RS232.

RS232 Pinout: COM 1 (E hlophisehileng), COM 2-4 (E Nehetsoe) 

Pin	Phallo ea Letšoao	Tlhaloso
	N/A	Sebaka sa lipontšo
TX	Sephetho	Fetisetsa data
RX	Kenyeletso	Amohela ya data
RTS	Sephetho	E Itokiselitse ho Romela'
CTS	Kenyeletso	Ho Hlakile ho Romela'

1.  Ha u sebelisa taolo ea phallo ea hardware.

RS485 Half Duplex TX kapa RX Pinout: COM 1 (Configurable)

Pin	Phallo ea Letšoao	Tlhaloso
	N/A	Sebaka sa lipontšo
TX	Kenyeletso/Sehlahisoa	Phapang B-
RX	(E sa sebelisoe)	(E sa sebelisoe)
RTS	Kenyeletso/Sehlahisoa	Phapang ea A+
CTS	(E sa sebelisoe)	(E sa sebelisoe)

RS485/422 Duplex e Felletseng: COM 1 (E ka hlophisoa)

Pin	Phallo ea Letšoao	Tlhaloso
	N/A	Sebaka sa lipontšo
TX	Sephetho	Phapang Z- / Tx-
RX	Kenyeletso	Phapang ea A+ / Rx+
RTS	Sephetho	Phapang ea Y+ / Tx+
CTS	Kenyeletso	Phapang B- / Rx-

QIO-IR1x4 karolo e ka pele

1. Power LED - E khantša boputsoa ha Q-SYS QIO-IR1x4 e buletsoe.
2. ID ea LED - LED e panya ka botala ha e behiloe ho Mokhoa oa ID ka Konopo ea ID kapa Q-SYS Configurator.
3. Konopo ea ID - E beha QIO-IR1x4 ho Q-SYS Designer Software le Q-SYS Configurator.

QIO-IR1x4 karolo e ka morao

1. Kenyelletso ea Matla a Kantle 24V DC 2.5 A - Matla a thusang, 24 VDC, 2.5 A, 2-pin Euro connector.
2. Daisy-Chain Power Output 24V DC 2.5 A - Matla a thusang, 24 VDC, 2.5 A 2-pin Euro connector.
3. LAN [PoE] - RJ-45 sehokelo, 802.3af PoE Mofuta oa 1 Sehlopha sa 1 matla, Q-LAN.
4. LAN [THRU] - sehokelo sa RJ-45, Ethernet daisy-chaining.
5.  Reset ea Sesebelisoa - Sebelisa paperclip kapa sesebelisoa se ts'oanang ho khutlisetsa litlhophiso tsa marang-rang tsa kamehla le ho khutlisa litlhophiso tsa kamehla tsa feme. Pele o leka ho seta bocha, sheba ho Thuso ea Q-SYS bakeng sa lintlha.
6.  IR SIG LEDS - Bontša tšebetso ea phetisetso bakeng sa CH/IR Output 1-4.
7. Liphetho tsa IR - E ka hlophisoa ho Q-SYS Designer Software joalo ka IR kapa Serial RS232. Sheba "QIO-IR1x4 IR Port Pinouts" leqepheng la 16.
8. IR Input - E fana ka 3.3VDC mme e amohela data ea IR. Sheba "QIO-IR1x4 IR Port Pinouts" leqepheng la 16.

QIO-IR1x4 IR Port Pinouts
QIO-IR1x4 e na le liphetho tse 'ne tsa IR le kenyelletso e le' ngoe ea IR:

• Liphetho tsa 1-4 li ka lokisoa ho Q-SYS Designer Software bakeng sa IR kapa mofuta oa Serial RS232.
• Input e fana ka 3.3VDC mme e fumana data ea IR.

Sephetho sa IR 1-4: Pinout ea Mokhoa oa IR 

Pin	Phallo ea Letšoao	Tlhaloso
SEKA	Sephetho	IR e fetisetsa data
	N/A	Referense ea matšoao

IR Output 1-4: Serial RS232 Mode Pinout

Pin	Phallo ea Letšoao	Tlhaloso
SEKA	Sephetho	RS232 fetisa data
	N/A	Referense ea matšoao

IR Input Pinout

Pin	Phallo ea Letšoao	Tlhaloso
SEKA	Kenyeletso	IR fumana data
+	Sephetho	3.3VDC
	N/A	Referense ea matšoao

Ho kenya Rack Mount

Q-SYS QIO Endpoints e etselitsoe ho kenngoa ka har'a rack-mount unit e tloaelehileng ho sebelisa Q-SYS 1RU rack tray (FG-901528-00). Raka
terei e nka likarolo tse 'ne tsa QIO Endpoint tsa bolelele ba sehlahisoa.
Rack Tray Hardware 

Hokela Likotwana Tse Bolokang
Bakeng sa QIO Endpoint e 'ngoe le e' ngoe eo u e kenyang ka har'a terei, kenya 'me u kopanye sekotwana se bolokang sebakeng se khuts'oane kapa se bolelele bo bolelele u sebelisa sekoti sa hlooho se bataletseng.

Hokela QIO Endpoints le Blanking Plates
Tsamaisa QIO Endpoint ka 'ngoe ho sekotwana se bolokang. Hokela yuniti ka 'ngoe ka li-screw tse peli tse sephara. Ka boikhethelo hokela lipoleiti tse koetsoeng, e 'ngoe le e 'ngoe e na le likurufu tse peli tse sephara.
HLOKOMELA: Lipoleiti tse se nang letho lia ikhethela 'me li ka sebelisoa ho tsamaisa moea o nepahetseng oa rack. Lipoleiti tse koetsoeng tse sa sebelisoeng li ka hokelloa ka morao ho terei ha ho hlokahala, joalo ka ha ho bonts'itsoe.

Ho kenngoa ha Surface Mount

QIO Endpoints e ka boela ea behoa tlas'a tafole, ka holim'a tafole, kapa leboteng. Bakeng sa efe kapa efe ea lits'ebetso tsena tse ntseng li hola, sebelisa bracket e ntseng e hola le li-screw tsa pan hlooho tse kenyellelitsoeng le khithi ea sekepe ea QIO Endpoint. Li-brackets li na le symmetrical ho lumellana le ho hloella ka lehlakoreng le letona ho ea sebakeng se shebileng fatše.
HLOKOMELA: Li-fasteners tsa ho hokela bracket holimo li tšoantšoa e le example empa ha e fanoe.

Ho kenya Freestanding

Bakeng sa ho kenya li-freestanding holim'a tafole, sebelisa li-spacers tse 'nè tse khomarelang ka tlas'a yuniti.

QSC Self Help Portal
Bala lingoliloeng tsa motheo tsa tsebo le lipuisano, jarolla software le firmware, view litokomane tsa sehlahisoa le livideo tsa koetliso, le ho theha linyeoe tsa tšehetso.
https://qscprod.force.com/selfhelpportal/s/
Tšehetso ea Bareki
Sheba leqephe la Ikopanye le Rona ho QSC websebaka sa Ts'ehetso ea Tekheniki le Tlhokomelo ea Bareki, ho kenyeletsoa linomoro tsa bona tsa mohala le lihora tsa ts'ebetso.
https://www.qsc.com/contact-us/
Tiisetso
Bakeng sa khopi ea QSC Limited Waranti, etela QSC, LLC., website at www.qsc.com.

© 2022 QSC, LLC. Litokelo tsohle li sirelelitsoe. QSC le logo ea QSC, Q-SYS, le letšoao la Q-SYS ke matšoao a ngolisitsoeng a QSC, LLC ho US Patent le.
Ofisi ea Letšoao la Khoebo le linaha tse ling. Lipatente li ka sebetsa kapa li ntse li le teng. Matshwao a mang kaofela ke thepa ya beng ba ona.
www.qsc.com/patent

Litokomane / Lisebelisoa

QSC QIO-GP8x8 QIO Series Kenyelletso ea Taolo ea Marang-rang kapa Li-Expanders tsa Output [pdf] Bukana ea Mosebelisi QIO-ML4i, QIO-L4o, QIO-ML2x2, QIO-GP8x8, QIO-S4, QIO-IR1x4, QIO Series, Network Control Input kapa Output Expanders, QIO Series Network Control Input kapa Output Expanders, QIO-GP8x8 QIO Series Network Control Kenyelletso kapa Lintlafatso

Litšupiso

• Bukana ea Mosebelisi