MP3766
Intlawulo yeSola yePWM
Umlawuli nge
Umboniso we-LCD
ngenxa yeebhetri zeLead Acid 
Incwadi Yemiyalelo
PHEZULUVIEW:
Nceda ugcine le ncwadana yemigaqo yexesha elizayoview.
Umlawuli wentlawulo we-PWM kunye nomboniso we-LCD owakhelwe ngaphakathi owamkela iindlela ezininzi zokulawula umthwalo kwaye unokusetyenziswa ngokubanzi kwiinkqubo zasekhaya zelanga, iimpawu zendlela, izibane zelanga zendlela, igadi yelanga l.amps, njl.
Iimpawu zidweliswe ngezantsi:
- Amacandelo aphezulu e-ST kunye ne-IR
- Izikhululo zinesatifikethi se-UL kunye ne-VDE, imveliso ikhuselekile kwaye ithembekile
- Isilawuli sinokusebenza ngokuqhubekayo kumthwalo ogcweleyo ngaphakathi kwendawo yobushushu ukusuka ku-25°C ukuya ku-55°C 3-S.tage Intelligent PWM ukutshaja: Buninzi, Boost/Linganisa, Float
- Inkxaso ye-3 yokutshaja iinketho: Itywinwe, iGel, kunye neNogumbe
- Uyilo lokubonisa i-LCD lubonisa ngokuguquguqukayo idatha yokusebenza yesixhobo kunye nemeko yokusebenza
- Ukuphuma kabini kwe-USB
- Ngeseto ezilula zamaqhosha, ukusebenza kuya kuba lula kwaye kube lula
- Iimowudi ezininzi zokulawula umthwalo
- Umsebenzi wezibalo zamandla
- Umsebenzi wembuyekezo yobushushu bebhetri
- Ukhuseleko olubanzi lwe-Electronic
IIMPAWU ZEMVELISO:
| 1 | LCD | 5 | Iiterminals zebhetri |
| 2 | Iqhosha leMENU | 6 | Layisha izikhululo |
| 3 | Izibuko le-RTS | 7 | SET iqhosha |
| 4 | Izikhululo zePV | 8 | Izibuko zokuPhuma kwe-USB* |
*Amazibuko emveliso ye-USB abonelela ngobonelelo lwamandla e-5VDC/2.4A kwaye anokhuseleko olufutshane lwesekethe.
IDIAGRAM YOQHAGAMSHELO:
- Xhuma amacandelo kumlawuli wentlawulo ngokulandelelana njengoko kuboniswe ngasentla kwaye ubeke ingqalelo kwi "+" kunye ne "-". Nceda ungafaki i-fuse okanye uvule i-breaker ngexesha lofakelo. Xa uqhawula inkqubo, umyalelo uya kugcinwa.
- Emva kokunika amandla kumlawuli, khangela i-LCD. Soloko uqhagamshela ibhetri kuqala, ukuze uvumele umlawuli ukuba aqaphele umthamo wesixhobotage.
- Ifuse yebhetri kufuneka ifakwe kufutshane nebhetri kangangoko. Umgama ocetyiswayo ungaphakathi kwe-150mm.
- Lo mlawuli ngumlawuli osemgangathweni ofanelekileyo. Naluphi na uqhagamshelo olulungileyo lwelanga, umthwalo, okanye ibhetri lunokusekwa emhlabeni njengoko lufuneka.
ISILUMKO
PHAWULA: Nceda uqhagamshele i-inverter okanye omnye umthwalo onesiqalo esikhulu sangoku kwibhetri kunomlawuli ukuba i-inverter okanye omnye umthwalo uyimfuneko.
UKUVULA:
- Umsebenzi webhetri
Iqhosha Umsebenzi Iqhosha leMENU • Jonga ujongano
• Ukumisela ipharamithaSET iqhosha • Layisha VULA/VUMA
• Susa impazamo
• Ngena kwiMowudi yokuSeta
• Gcina idatha - Umboniso weLCD
- Inkcazo yobume
Igama Uphawu Ubume PV uluhlu 
Usuku 
Busuku 
Akukho ntlawulo 
Ukutshaja 
PV uluhlu lwevolthitage, yangoku, kwaye ivelise amandla Ibhetri 
Umthamo webhetri, Ukutshaja 
Ibhetri Voltage, Ngoku, iqondo lobushushu 
Uhlobo Lwebhetri Layisha 
(Umthwalo) umfowunelwa owomileyo uqhagamshelwe 
(Umthwalo) uqhagamshelwano olomileyo luqhawulwe layisha Umthwalo weVoltage, Okwangoku, Layisha imo - Bhrawuza ujongano
- Xa kungekho msebenzi, i-interface iya kuba ngumjikelo ozenzekelayo, kodwa ujongano olulandelayo lulandelayo aluyi kuboniswa.
- Amandla e-Accumulative zero clearing: Phantsi kojongano lwamandla e-PV, cofa i-SET iqhosha kwaye ubambe kwi-5s emva koko ixabiso liqhwanyaza, cofa iqhosha le-SET kwakhona ukucima ixabiso.
- Ukusetha iyunithi yeqondo lokushisa: Ngaphantsi kwe-interface yobushushu bebhetri, cofa iqhosha le-SET kwaye ubambe kwi-5s ukutshintsha.
- Isalathiso setyala
Ubume Umqondiso Inkcazo Ibhetri ikhutshwe kakhulu 
Inqanaba lebhetri libonisa okungenanto, ukuqhwanyaza kwesakhelo sebhetri, ukuqhwanyaza kwe icon yempazamo Ibhetri ngaphezulu kwevoltage 
Inqanaba lebhetri libonisa ngokupheleleyo, ukuqhwanyaza kwesakhelo sebhetri, kunye ne-fault icon blink. Ubushushu bebhetri 
Inqanaba lebhetri libonisa ixabiso langoku, ukuqhwanyaza kwesakhelo sebhetri, kunye ne-fault icon blink. Ukusilela komthwalo 
Layisha umthwalo, Layisha isiphaluka esifutshane 1Xa umthwalo wangoku ufikelela kumaxesha angama-1.02-1.05, amaxesha angama-1.05-1.25, amaxesha angama-1.25-1.35, kunye namaxesha angama-1.35-1.5 ngaphezu kwexabiso eliqhelekileyo, umlawuli uya kucima ngokuzenzekelayo imithwalo kwi-50s, 0s, 10s, kunye ne-2s ngokulandelanayo.
- Layisha iMowudi yokumisela
Amanyathelo okusebenza:
Ngaphantsi kojongano lwemowudi yomthwalo, cofa i-SET iqhosha kwaye ubambe kwi-5s de inani liqalise ukudanyaza, emva koko ucinezele iqhosha le-MENU ukuseta ipharamitha, kwaye ucinezele iqhosha le-SET ukuze uqinisekise.1** Isibali-xesha 1 2** Isibali-xesha 2 100 Ukukhanya ON/OFF 2 n Kukhubazekile 101 Umthwalo uza kuvula iyure enye kususela ukutshona kwelanga 201 Umthwalo uya kuba yiyure enye ngaphambi kokuphuma kwelanga 102 Umthwalo uya kuvula iiyure ezi-2 kususela ukutshona kwelanga 202 Umthwalo uya kuhlala iiyure ezi-2 ngaphambi kokuphuma kwelanga 103-113 Umthwalo uya kuvula iiyure ezi-3-13 ukususela ekutshoneni kwelanga 203-213 Umthwalo uya kuba kwiiyure ezi-3-13 ngaphambi kokuphuma kwelanga 114 Umthwalo uya kuvula iiyure ezi-14 kususela ukutshona kwelanga 214 Umthwalo uya kuhlala iiyure ezi-14 ngaphambi kokuphuma kwelanga 115 Umthwalo uya kuvula iiyure ezi-15 kususela ukutshona kwelanga 215 Umthwalo uya kuhlala iiyure ezi-15 ngaphambi kokuphuma kwelanga 116 Imo yovavanyo 2 n Kukhubazekile 117 Imo yesandla (Ukulayisha okumiselweyo KUVULIWE) 2 n Kukhubazekile PHAWULA: Nceda usete ukukhanya ON/OFF, imowudi yovavanyo, kunye nemowudi yeManuwali ngeTimer1. I-Timer2 iya kucinywa kwaye ibonise "2 n".
- Uhlobo Lwebhetri
Amanyathelo okusebenza:
Ngaphantsi kweBetri Voltage ujongano, cofa i SET iqhosha kwaye ubambe ngo-5s emva koko ungene kujongano lohlobo lwesethingi yebhetri. Emva kokukhetha uhlobo lwebhetri ngokucinezela iqhosha le-MENU, ukulinda ii-5s, okanye ucinezele i-SET iqhosha kwakhona ukuze uyiguqule ngempumelelo.
PHAWULA: Nceda ubhekisele kumthamo webhetritagItheyibhile yeeparamitha zohlobo olwahlukileyo lwebhetri.
UKHUSELEKO:
| Ukhuseleko | Iimeko | Ubume |
| Ukuguqula umva kwe-PV | Xa ibhetri ichanekile ukudibanisa, iPV inokubuyiselwa umva. | Umlawuli ayonakaliswa |
| Ibhetri iReverse Polarity | Xa i-PV ingadibanisi, ibhetri inokubuyiselwa umva. | |
| Ibhetri ngaphaya kweVoltage | Ibhetri voltagufikelela kwi-OVD | Yeka ukubiza |
| Ibhetri phezu kokukhutshwa | Ibhetri voltage ifikelela kwi-LVD | Yeka ukukhupha |
| Ukufudumeza Ibhetri | Isivamvo sobushushu singaphezulu kwama-65°C | Imveliso CIMA |
| Controller Overheating | Isivamvo sobushushu singaphantsi kwama-55°C | Imveliso IVULIWE |
| Isivamvo sobushushu singaphezulu kwama-85°C | Imveliso CIMA | |
| Isivamvo sobushushu singaphantsi kwama-75°C | Imveliso IVULIWE | |
| Layisha iSekethe emfutshane | Layisha ngoku > amaxesha angama-2.5 alinganiswe ngoku Kwisekethe enye emfutshane, isiphumo OFF 5s; Iisekethe ezimbini ezimfutshane, imveliso i-OFF 10s; kwiisekethe ezintathu ezimfutshane, imveliso i-OFF 15s; Iisekethe ezimfutshane ezine, imveliso i-OFF 20s; Iisekethe ezimfutshane ezintlanu, imveliso OFF 25s; Iisekethe ezimfutshane ezintandathu, imveliso OFF | Imveliso CIMA Susa isiphene: Qala ngokutsha isilawuli okanye ulinde umjikelo wosuku olunye (ixesha lasebusuku> iiyure ezi-3). |
| Ukulayisha umthwalo ongaphezulu | Ukulayisha okwangoku> amaxesha e-2.5 alinganiswe ngoku 1.02-1.05 amaxesha, i-50s; 1.05-1.25 amaxesha, 30s; 1.25-1.35 amaxesha, 10s; 1.35-1.5 amaxesha, 2s |
Imveliso CIMA Sula impazamo: Qalisa kwakhona isilawuli okanye ulinde umjikelo wosuku olunye (ixesha lobusuku> iiyure ze-3). |
| I-RTS eyonakeleyo | I-RTS imfutshane okanye yonakele | Ukutshaja okanye ukukhupha kwi-25°C |
UKULUNGISA INGXAKI:
| Iimpazamo | Izizathu ezinokwenzeka | Ukulungisa ingxaki |
| I-LCD icinyiwe ngexesha lasemini xa ukukhanya kwelanga kuwela kwiimodyuli zePV ngokufanelekileyo | Ukucinywa kwamalungu ePV | Qinisekisa ukuba iintambo zePV zichanekile kwaye ziqinile. |
| Uqhagamshelo lwecingo luchanekile, iLCD ayibonisi | 1) Ibhetri voltagi-e ingaphantsi kwe-9V 2)PV voltagi-e ingaphantsi kunomthamo webhetritage |
1)Nceda ujonge umqulutage yebhetri. Ubuncinci i-9V voltage ukwenza umlawuli asebenze. 2)Khangela igalelo le-PVtage kufuneka ibephezulu kuneebhetri. |
 Ukuqhwanyaza kojongano |
ukugqithisatage ge | Khangela ukuba ibhetri voltagi-e iphezulu kunenqaku le-OVD (over-voltage qhawula voltage), kwaye uqhawule i-PV. |
 Ukuqhwanyaza kojongano |
Ibhetri ikhutshwe kakhulu | Xa ibhetri voltage ibuyiselwa okanye ngaphezulu kwe-LVR inqaku (umthamo ophantsitage ukudibanisa kwakhona voltage), umthwalo uya kuchacha |
 Ukuqhwanyaza kojongano |
Ubushushu bebhetri | Umlawuli uya kujika ngokuzenzekelayo ifayile inkqubo icinyiwe. Kodwa ngelixa iqondo lokushisa liyancipha libe ngaphantsi kwe-50 ° C, umlawuli uya kuqalisa kwakhona. |
| Ukuqhwanyaza kojongano |
Ukugqithiswa okanye iSekethe emfutshane | Nceda unciphise inani lezixhobo zombane okanye ujonge ngenyameko uqhagamshelo lwemithwalo. |
INGCACISO:
| Umzekelo: | MP3766 |
| Inkqubo yesiqhelo voltage | 12/24VDC, Auto |
| Ukufakwa kwebhetri voltagUluhlu | 9V-32V |
| Intlawulo elinganisiweyo/yokukhupha yangoku | 30A@55°C |
| Max. I-PV evulekileyo yesiphaluka voltage | 50V |
| Uhlobo Lwebhetri | Itywiniwe(Okuhlala kukho) / Ijeli / Ikhukula |
| Equalize Charging Voltage^ | Itywinwe: 14.6V / Ijeli: Hayi / Ikhukula:14.8V |
| Yandisa ukuTshaja Voltage^ | Kwatywinwa:14.4V / Gel:14.2V / Isikhukula:14.6V |
| Ukutshaja kweFloat Voltage^ | Yatywinwa / Ijeli / Yakhukula:13.8V |
| Umthamo ophantsitage UkuQhagamshela kwakhona Voltage^ | Yatywinwa / Ijeli / Ikhukula.12 6V |
| Yatywinwa / Ijeli / Yakhukula:12.6V | |
| Umthamo ophantsitage Qhawula iVoltage^ | Yatywinwa / Ijeli / Yakhukula:11.1V |
| Ukuzityela | <9.2mA/12V;<11.7mA/24V; <14.5mA/36V;<17mA/48V |
| I-coefficient yembuyekezo yobushushu | -3mV/°C/2V (25°C) |
| Umrhumo wesekethe voltage yehle | <0.2W |
| Discharge circuit voltage yehle | <0.16V |
| Uluhlu lobushushu be-LCD | -20°C-+70°C |
| Ubushushu bendawo yokusebenza | -25°Ci-55°C(Imveliso inokusebenza ngokuqhubekayo kumthwalo opheleleyo) |
| Ubuntu bezizalwane | 95%, NC |
| Indawo ebiyelweyo | IP30 |
| Ukuthoba | Common Positive |
| Iziphumo ze-USB | 5VDC/2.4A(Totan |
| Ubungakanani(mm) | 181×100.9×59.8 |
| Ubungakanani bokunyuka (mm) | 172×80 |
| Ubungakanani bomngxuma onyukayo(mm) | 5 |
| Izikhululo | 16mm2/6AWG |
| Ukusinda okushiyekile | 0.55kg |
^ Ngaphezulu kweeparamitha zikwinkqubo ye-12V kwi-25 ° C, kabini kwinkqubo ye-24V.
Isasazwe ngu:
Ukusasaza i-Electus Pty. Ltd.
320 iVictoria Rd, eRydalmere
NSW 2116 Ostreliya
www.lelkdin-times.com.au
Yenziwe etshayina
Amaxwebhu / Izibonelelo
 |
I-POWERTECH MP3766 PWM isiLawuli sokuTshaja seSola esine-LCD Display [pdf] Incwadi Yomyalelo IMP3766 PWM isiLawuli sokuTshaja seSola esine-LCD Display, MP3766, iPWM yeSolar Charge Controller ene-LCD Display, isiLawuli esinomboniso weLCD, isiboniso seLCD, iPWM yokuTshaja yeSola LCD Bonisa |
