MP3766
PWM Solar Charge
Controller ne
LCD kuratidza
yeLead Acid Battery 
Bhuku reMirayiridzo
PAKUPEDZAVIEW:
Ndapota chengetedza bhuku rino kuitira ramangwana review.
Iyo PWM yekuchaja controller ine yakavakirwa-mukati LCD kuratidza inotora akawanda mitoro yekudzora modhi uye inogona kushandiswa zvakanyanya pane solar imba masisitimu, masaini emigwagwa, solar street lights, solar garden l.amps, nezvimwewo.
Zvimiro zvakanyorwa pazasi:
- Yepamusoro-mhando zvikamu zve ST uye IR
- Zviteshi zvine UL uye VDE certification, chigadzirwa chakachengeteka uye chakavimbika
- A controller anogona kushanda nguva dzose pamutoro wakazara mukati memamiriro ekunze tembiricha kubva -25°C kusvika 55°C 3-S.tage akangwara PWM kuchaja: Kuwanda, Boost/Equalize, Float
- Tsigira 3 yekuchaja sarudzo: Yakavharwa, Gel, uye Mafashamo
- LCD inoratidzira dhizaini inoratidza zvine simba data yekushandisa uye mamiriro ekushanda
- Kaviri USB yakabuda
- Nezvigadziriso zviri nyore zvebhatani, iko kushanda kunenge kwanyanya kugadzikana uye kuri nyore
- Multiple load control modes
- Simba nhamba basa
- Battery tembiricha muripo basa
- Yakadzama Kudzivirirwa kwemagetsi
PRODUCT FEATURES:
| 1 | LCD | 5 | Battery Terminals |
| 2 | MENU Bhatani | 6 | Load Terminals |
| 3 | RTS Port | 7 | SET Bhatani |
| 4 | PV Terminals | 8 | USB Output Ports* |
*USB inobuda madoko inopa magetsi e5VDC/2.4A uye ine pfupi yekudzivirira yedunhu.
CONNECTION DIAGRAM:
- Batanidza zvikamu kune cheja controller mukutevedzana sezvakaratidzwa pamusoro uye teerera kune "+" uye "-". Ndapota usaise fuse kana kuvhura breaker panguva yekuisa. Pakubvisa iyo system, kurongeka kuchachengetwa.
- Mushure mekuisa simba pane controller, tarisa LCD. Gara uchibatanidza bhatiri kutanga, kuitira kuti ubvumire mutongi kuti azive system voltage.
- Iyo fuse yebhatiri inofanirwa kuiswa padyo nebhatiri sezvinobvira. Chinhambwe chinokurudzirwa chiri mukati me150mm.
- Uyu mutongi mutongi akanaka wepasi. Chero kubatanidza kwakanaka kwezuva, mutoro, kana bhatiri inogona kudzika pasi sezvinodiwa.
KUCHENJERA
CHERECHEDZA: Ndapota shandisai inverter kana imwe mutoro une kutanga kukuru ikozvino kune bhatiri pane kune mutongi kana inverter kana imwe mutoro ichidiwa.
KUSVIRA:
- Bhatiri Basa
Bhatani Function bhatani reMENU • Bhurawuza interface
• Kuisa parameterSET bhatani • Rodha ON/OFF
• Bvisa kukanganisa
• Pinda muSet Mode
• Chengetedza data - Chiratidziro cheLCD
- Status Description
Zita Symbol Status PV array 
Zuva 
Husiku 
Hapana muripo 
Kuchaja 
PV array's voltage, ikozvino, uye kugadzira simba Bhatiri 
Kuwanda kwebhatiri, Mukuchaja 
Bhatiri Voltage, Iyezvino, Tembiricha 
Bhatiri Type Load 
(Mutoro) yakaoma kubata yakabatana 
(Mutoro) yakaoma kuonana yakabviswa LOAD Load Voltage, Yazvino, Rodha modhi - Browse Interface
- Kana pasina oparesheni, iyo interface ichange iri otomatiki kutenderera, asi maviri anotevera maratidziro haana kuratidzwa.
- Accumulative power zero clearing: Pasi pePV power interface, dzvanya SET bhatani uye ubate pa5s ipapo kukosha kupenya, dzvanya SET bhatani zvakare kuti ubvise kukosha.
- Kuseta tembiricha unit: Pasi pebhatiri tembiricha interface, tinya SET bhatani uye bata pa5s kuti uchinje.
- Mhosva Chiratidzo
Status Icon Tsanangudzo Bhatiri rapera 
Battery level inoratidza isina chinhu, bhatiri furemu blink, kukanganisa icon blink Bhatiri pamusoro pevoltage 
Battery level inoratidza izere, bhatiri furemu blink, uye fault icon blink. Battery overheating 
Chiyero chebhatiri chinoratidza kukosha kwazvino, bhatiri furemu blink, uye fault icon blink. Kutadza kwemutoro 
Rodha yakawandisa, Rodha pfupi dunhu 1Kana mutoro wazvino wasvika 1.02-1.05 nguva, 1.05-1.25 nguva, 1.25-1.35 nguva, uye 1.35-1.5 nguva kupfuura kukosha kwezita, mutongi anozodzima mitoro mu50s, 0s, 10s, uye 2s zvichiteerana.
- Load Mode Setting
Matanho Okushanda:
Pasi peiyo load mode setting interface, dzvanya SET bhatani wobatirira pa5s kusvika nhamba yatanga kupenya, wobva wadzvanya bhatani reMENU kuseta parameter, wodzvanya bhatani reSET kuti usimbise.1** Nguva 1 2** Nguva 2 100 Chiedza ON/OFF 2 n Yakaremara 101 Load ichange iripo kweawa imwe chete kubva zuva ranyura 201 Mutoro uchange uripo kweawa imwe zuva risati rabuda 102 Mutoro uchange uripo kwemaawa gumi nemana kubva pakuvira kwezuva 202 Mutoro uchange uripo kwemaawa gumi nemana zuva risati rabuda 103-113 Mutoro uchange uripo kwemaawa 3-13 kubva pakuvira kwezuva 203-213 Mutoro uchange uripo kwemaawa 3-13 zuva risati rabuda 114 Mutoro uchange uripo kwemaawa gumi nemana kubva pakuvira kwezuva 214 Mutoro uchange uripo kwemaawa gumi nemana zuva risati rabuda 115 Mutoro uchange uripo kwemaawa gumi nemana kubva pakuvira kwezuva 215 Mutoro uchange uripo kwemaawa gumi nemana zuva risati rabuda 116 Test mode 2 n Yakaremara 117 Manual mode (Default load ON) 2 n Yakaremara CHERECHEDZA: Ndokumbira uise Chiedza ON/OFF, Test mode, uye Manual mode kuburikidza neTimer1. Timer2 ichavharwa uye inoratidza "2 n".
- Bhatiri Type
Matanho Okushanda:
Pasi peBattery Voltage interface, dzvanya SET bhatani uye bata pa5s wobva wapinda mukati meiyo Battery mhando yekuseta. Mushure mekusarudza rudzi rwebhatiri nekudzvanya bhatani reMENU, kumirira 5s, kana kudzvanya SET bhatani zvakare kuti rigadzirise zvinobudirira.
CHERECHEDZA: Ndokumbira utarise kune bhatiri voltage parameters tafura yemhando dzakasiyana dzebhatiri.
KUDZIVIRIRA:
| Dziviriro | Conditions | Status |
| PV Reverse Polarity | Kana bhatiri rakanyatso kubatanidza, iyo PV inogona kudzoserwa kumashure. | Iyo controller haina kukuvara |
| Battery Reverse Polarity | Kana iyo PV isiri kubatana, bhatiri rinogona kudzoserwa kumashure. | |
| Bhatiri Kupfuura Voltage | Bhatiri voltaganosvika paOVD | Rega kuchaja |
| Battery Over Discharge | Bhatiri voltaganosvika paLVD | Rega kuburitsa |
| Battery Overheating | Tembiricha sensor yakakwira kupfuura 65°C | Kubuda kwadzimwa |
| Controller Overheating | Temperature sensor iri pasi pe55°C | Kubuda kuri ON |
| Tembiricha sensor yakakwira kupfuura 85°C | Kubuda kwadzimwa | |
| Temperature sensor iri pasi pe75°C | Kubuda kuri ON | |
| Rodha Short Circuit | Kutakura ikozvino> 2.5 nguva yakatarwa ikozvino Mune Imwe pfupi pfupi, iyo inobuda ndeye OFF 5s; Maseketi maviri mapfupi, iyo inobuda ndeye OFF 10s; mumatatu mapfupi maseketi, kubuda kwacho kuri OFF 15s; Maseketi mana mapfupi, kubuda kwacho kuri OFF 20s; Maseketi mashanu mapfupi, iyo inobuda ndeye OFF 25s; Maseketi matanhatu mapfupi, zvinobuda ZVINODZIMA | Kubuda kwadzimwa Bvisa mhosva: Tangazve mutongi kana kumirira imwe husiku-yezuva kutenderera (husiku nguva> maawa matatu). |
| Mutoro Wakawandisa | Kutakura ikozvino> 2.5 nguva yakatarwa ikozvino 1.02-1.05 nguva, iyo 50s; 1.05-1.25 nguva, 30s; 1.25-1.35 nguva, 10s; 1.35-1.5 nguva, 2s |
Kubuda kwadzimwa Bvisa chikanganiso: Tangazve mutongi kana kumirira kutenderera kwehusiku-zuva (nguva yehusiku> maawa matatu). |
| Yakakuvadzwa RTS | Iyo RTS ipfupi-inotenderera kana kukuvadzwa | Kuchaja kana kuburitsa pa25°C |
KUTAMBURA ZVINHU:
| Kukanganisa | Zvikonzero Zvingabvira | Kugadzirisa matambudziko |
| Iyo LCD inodzima panguva yemasikati kana kupenya kwezuva kuchiwira paPV modules zvakanaka | PV yakarongedzwa kubviswa | Simbisa kuti PV wire connections ndeyechokwadi uye yakasimba. |
| Kubatana kwewaya kwakarurama, LCD hairatidze | 1) Bhatiri voltage yakaderera pane 9V 2)PV voltage ishoma pane bhatiri voltage |
1) Ndokumbira utarise voltage yebhatiri. Anenge 9V voltage kuti activate controller. 2) Tarisa PV yekupinda voltage iyo inofanira kuva yakakwirira kudarika mabhatiri. |
 Interface blink |
overvoltage ge | Tarisa kana bhatiri voltage yakakwirira kudarika OVD point (over-voltage disconnect voltage), uye bvisa iyo PV. |
 Interface blink |
Bhatiri rapera | Kana bhatiri voltage inodzoserwa kune kana pamusoro peLVR pfungwa (low voltage reconnect voltage), mutoro uchapora |
 Interface blink |
Battery overheating | Iyo controller inongo shandura iyo system off. Asi nepo tembiricha ichidzikira kuva pasi pe50°C, controller ichatangazve. |
| Interface blink |
Overload kana Short circuit | Ndokumbira uderedze huwandu hwemidziyo yemagetsi kana nyatso tarisa kubatanidza mitoro. |
ZVINOTAURWA:
| Muenzaniso: | MP3766 |
| Zita remazita voltage | 12/24VDC, Auto |
| Kuisa bhatiri voltage range | 9V-32V |
| Yakatemerwa charge / discharge current | 30A@55°C |
| Max. PV yakavhurika redunhu voltage | 50V |
| Bhatiri mhando | Yakavharwa (Default) / Gel / Mafashamo |
| Equalize Kuchaja Voltage^ | Yakanamwa:14.6V / Gel: Kwete / Mafashamo:14.8V |
| Boost Kuchaja Voltage^ | Yakanamwa:14.4V / Gel:14.2V / Mafashamo:14.6V |
| Float Kuchaja Voltage^ | Yakanamwa / Geri / Mafashamo:13.8V |
| Yakadzika Voltage Reconnect Voltage^ | Yakanamwa / Geri / Mafashamo.12 6V |
| Yakanamwa / Geri / Mafashamo:12.6V | |
| Yakadzika Voltage Dimbura Voltage^ | Yakanamwa / Geri / Mafashamo:11.1V |
| Kuzvidyira | <9.2mA/12V;<11.7mA/24V; <14.5mA/36V;<17mA/48V |
| Tembiricha muripo coefficient | -3mV/°C/2V (25°C) |
| Charge circuit voltage kudonha | <0.2W |
| Discharge circuit voltage kudonha | <0.16V |
| LCD tembiricha renji | -20°C-+70°C |
| Kushanda nharaunda tembiricha | -25 ° Ci-55 ° C (Chigadzirwa chinogona kushanda nguva dzose pamutoro wakazara) |
| Hunyoro hunyoro | 95%, NC |
| Enclosure | IP30 |
| Grounding | Common Positive |
| USB kuburitsa | 5VDC/2.4A(Totan |
| Dimension(mm) | 181×100.9×59.8 |
| Kukwirisa saizi(mm) | 172×80 |
| Kukwidza gomba saizi (mm) | 5 |
| Zviteshi | 16mm2/6AWG |
| Net uremu | 0.55kg |
^Pamusoro pema paramita ari muhurongwa hwe12V pa25°C, kaviri muhurongwa hwe24V.
Rinoparadzirwa ne:
Electus Kugovera Pty. Ltd.
320 Victoria Rd, Rydalmere
NSW 2116 Australia
www.neworlddistribution.com.au
Yakagadzirwa muChina
Zvinyorwa / Zvishandiso
 |
POWERTECH MP3766 PWM Solar Charge Controller ine LCD Display [pdf] Bhuku reMirayiridzo MP3766 PWM Solar Charge Controller ine LCD Display, MP3766, PWM Solar Charge Controller ine LCD Display, Controller ine LCD display, LCD Display, PWM Solar Charge LCD Ratidza. |
