MP3766
Tlhōlo ea Solar ea PWM
Molaoli ea nang le
Pontšo ea LCD
bakeng sa Libetri tsa Lead Acid 
Buka ea Tataiso
FEELAVIEW:
Ka kopo, boloka bukana ena bakeng sa review.
PWM charger controller e nang le ponts'o ea LCD e hahelletsoeng e amohelang mekhoa e mengata ea taolo ea mojaro mme e ka sebelisoa haholo lits'ebetsong tsa letsatsi, matšoao a sephethephethe, mabone a letsatsi a seterateng, serapa sa letsatsi l.amps, joalo-joalo.
Lintlha li thathamisitsoe ka tlase:
- Likarolo tsa boleng bo holimo tsa ST le IR
- Li-terminal li na le setifikeiti sa UL le VDE, sehlahisoa se bolokehile ebile se ka tšeptjoa haholoanyane
- Taolo e ka sebetsa a sa khaotse ka mojaro o felletseng ka har'a mocheso oa tikoloho ho tloha ho -25°C ho ea ho 55°C 3-S.tage bohlale ho tjhaja PWM: Bongata, Boost/Equalize, Float
- Ts'ehetsa likhetho tse 3 tsa ho tjhaja: E tiisitsoe, Gel, 'me e tletse likhohola
- Moralo oa ponts'o ea LCD o bonts'a data ea ts'ebetso ea sesebelisoa le boemo ba ts'ebetso
- Phatlalatso ea USB habeli
- Ka litlhophiso tse bonolo tsa konopo, ts'ebetso e tla ba bonolo ebile e le bonolo
- Mekhoa e mengata ea ho laola mojaro
- Lipalopalo tsa matla li sebetsa
- Ts'ebetso ea matšeliso ea mocheso oa betri
- Ts'ireletso e pharalletseng ea Elektroniki
LITŠOANTŠISO TSA SEHLAHLISO:
| 1 | LCD | 5 | Lisebelisoa tsa Battery |
| 2 | Konopo ea MENU | 6 | Laola li-terminals |
| 3 | Boema-kepe ba RTS | 7 | Beha Konopo |
| 4 | Lisebelisoa tsa PV | 8 | USB Output Ports* |
*Likou tsa USB li fana ka phepelo ea motlakase ea 5VDC/2.4A 'me li na le tšireletso ea potoloho e khutšoane.
TŠEBELETSO EA KHOPO:
- Kopanya likarolo ho molaoli oa tefiso ka tatellano e bontšitsoeng ka holimo 'me u ele hloko "+" le "-". Ka kopo u se ke ua kenya fuse kapa ua bulela sekhechana nakong ea ho kenya. Ha o khaola tsamaiso, taelo e tla bolokoa.
- Ka mor'a ho kenya matla ho molaoli, hlahloba LCD. Kamehla hokela betri pele, molemong oa ho lumella molaoli ho lemoha matla a sistimitage.
- Fuse ea betri e lokela ho kenngoa haufi le betri ka hohle kamoo ho ka khonehang. Sebaka se sisintsweng se ka hare ho 150mm.
- Taolo ena ke taolo e ntle ea fatše. Khokahano efe kapa efe e ntle ea letsatsi, mojaro, kapa betri e ka theoa fatše kamoo ho hlokahalang.
TLHOKOMELO
HLOKOMELA: Ka kopo, hokela inverter kapa mojaro o mong o nang le motlakase o moholo oa ho qala betri ho e-na le ho selaoli haeba inverter kapa mojaro o mong o hlokahala.
MOSEBETSI:
- Mosebetsi oa Battery
Konopo Mosebetsi Konopo ea MENU • Browse segokanyimmediamentsi sa sebolokigolo
• Ho seta parametharaSET konopo • Laela ON/OFF
• Hlakola phoso
• Kena ho Seta Mokgwa
• Boloka data - Pontšo ea LCD
- boemo Tlhaloso
Lebitso Letšoao Boemo Sehlopha sa PV 
Letsatsi 
Bosiu 
Ha ho tefiso 
Ho tjhaja 
Matla a PV arraytage, hona joale, le ho hlahisa matla Betri 
Bokhoni ba betri, ha e ntse e tjhaja 
Battery Voltage, Hona joale, Mocheso 
Mofuta oa Leshala Laela 
(Mojaro) ho omella ho kopana 
(Mojaro) sehokelo se omileng se khaotsoe MOJALO Mojaro Voltage, Hajoale, Mokhoa oa ho kenya - Browse Interface
- Ha ho se na ts'ebetso, sebopeho se tla fetoha potoloho ea othomathiki, empa li-interfaces tse peli tse latelang ha li bontšoe.
- Accumulative power zero clearing: Tlas'a sebopeho sa matla sa PV, tobetsa konopo ea SET 'me u tšoare 5s ebe boleng bo panya, tobetsa konopo ea SET hape ho hlakola boleng.
- Seta yuniti ea mocheso: Tlas'a sebopeho sa mocheso oa betri, tobetsa konopo ea SET ebe u tšoara 5s ho switjha.
- Pontšo ea phoso
Boemo Letšoao Tlhaloso Betri e felile 
Boemo ba betri bo bontša ho se na letho, ho panya ha foreimi ea betri, ho panya ha letšoao la phoso Betri ka holim'a voltage 
Boemo ba betri bo bonts'a e tletse, foreimi ea betri e panya, 'me letšoao la phoso le panya. Ho chesa ha betri 
Boemo ba betri bo bonts'a boleng ba hajoale, ho panya ha foreimi ea betri, le ho panya ha letšoao la phoso. Ho hloleha ha mojaro 
Lata mejaro, Laola potoloho e khuts'oane 1Ha mojaro oa hona joale o fihla makhetlo a 1.02-1.05, makhetlo a 1.05-1.25, makhetlo a 1.25-1.35, le makhetlo a 1.35-1.5 ho feta boleng ba lebitso, molaoli o tla tima meroalo ka bo-50s, 0s, 10s, le 2s ka ho latellana.
- Load Mode Setting
Mehato ea ts'ebetso:
Tlas'a sebopeho sa mokhoa oa mojaro, tobetsa konopo ea SET ebe u tšoara 5s ho fihlela palo e qala ho benya, ebe o tobetsa konopo ea MENU ho seta parameter, ebe o tobetsa konopo ea SET ho netefatsa.1** Selemo 1 2** Selemo 2 100 Lesedi ON/OFF 2 n E holofetse 101 Moroalo o tla sebetsa hora e le 1 esale letsatsi le likela 201 Moroalo o tla kengoa hora e 1 pele letsatsi le chaba 102 Moroalo o tla ba teng ka lihora tse 2 ho tloha ha letsatsi le likela 202 Mojaro o tla lula lihora tse 2 pele letsatsi le chaba 103-113 Moroalo o tla sebetsa lihora tse 3-13 ho tloha ha letsatsi le likela 203-213 Moroalo o tla sebetsa lihora tse 3-13 pele letsatsi le chaba 114 Moroalo o tla ba teng ka lihora tse 14 ho tloha ha letsatsi le likela 214 Mojaro o tla lula lihora tse 14 pele letsatsi le chaba 115 Moroalo o tla ba teng ka lihora tse 15 ho tloha ha letsatsi le likela 215 Mojaro o tla lula lihora tse 15 pele letsatsi le chaba 116 Mokhoa oa teko 2 n E holofetse 117 Mokhoa oa matsoho (Mokhoa oa kamehla o BUTSE) 2 n E holofetse HLOKOMELA: Ka kopo, seta Leseli ON/OFF, Mokhoa oa liteko, le mokhoa oa Manual ka Timer1. Timer2 e tla tima 'me e hlahise "2 n".
- Mofuta oa Leshala
Mehato ea ts'ebetso:
Tlas'a Battery Voltage, tobetsa konopo ea SET ebe u tšoara 5s ebe u kenya sebopeho sa mofuta oa Battery. Kamora ho khetha mofuta oa betri ka ho tobetsa konopo ea MENU, ho emela 5s, kapa ho tobetsa konopo ea SET hape ho e fetola ka katleho.
HLOKOMELA: Ka kopo, sheba matla a betritagTafole ea parameter ea mefuta e fapaneng ea betri.
TŠIRELETSO:
| Tshireletso | Maemo | Boemo |
| PV Reverse Polarity | Ha betri e hokela hantle, PV e ka khutlisetsoa morao. | Mookameli ha a senyehe |
| Polarity ea Battery Reverse | Ha PV e sa hokahane, betri e ka khutlisetsoa morao. | |
| Battery Ho feta Voltage | Matla a betri voltage fihla ho OVD | Emisa ho tjhaja |
| Battery Over Discharge | Matla a betri voltage fihla LVD | Emisa ho qhala |
| Ho Fetetsa ha Battery | Sensor ea mocheso e phahame ho feta 65°C | Sehlahisoa se TIMA |
| Controller Overheating | Sensor ea mocheso e ka tlase ho 55°C | Sehlahisoa se BUTSE |
| Sensor ea mocheso e phahame ho feta 85°C | Sehlahisoa se TIMA | |
| Sensor ea mocheso e ka tlase ho 75°C | Sehlahisoa se BUTSE | |
| Jara Short Circuit | Jaro hona joale> 2.5 linako tse lekantsoeng hona joale Ka potoloho e le 'ngoe e khutšoanyane, tlhahiso ke OFF 5s; Lipotoloho tse peli tse khutšoane, tlhahiso e OFF 10s; ka lipotoloho tse tharo tse khutšoane, tlhahiso ke OFF 15s; Lipotoloho tse 'nè tse khutšoanyane, tlhahiso e OFF 20s; Lipotoloho tse hlano tse khutšoanyane, tlhahiso ke OFF 25s; Li-circuits tse ts'eletseng tse khutšoane, tlhahiso e TIMA | Sehlahisoa se TIMA Hlakola phoso: Qala selaoli bocha kapa u emele potoloho e le 'ngoe ea bosiu (nako ea bosiu> lihora tse 3). |
| Mojaro o boima haholo | Laela hona joale> Linako tsa 2.5 li lekantsoe linako tsa hona joale tsa 1.02-1.05, 50s; 1.05-1.25 linako tse ling, 30s; 1.25-1.35 linako tse ling, 10s; 1.35-1.5 linako tse ling, 2s |
Sehlahisoa se TIMA Hlakola phoso: Qala taolo hape kapa u emele potoloho e le 'ngoe ea bosiu (nako ea bosiu> lihora tse 3). |
| RTS e senyehileng | RTS e khutsufalitsoe kapa e senyehile | Ho tjhaja kapa ho tjhaja ka 25°C |
HO BATLE PHOSO:
| Liphoso | Mabaka a ka Etsahalang | Ho batle phoso |
| LCD e tima motšehare ha khanya ea letsatsi e oela ho PV modules hantle | PV e khetholla | Netefatsa hore likhokelo tsa PV terata li nepahetse ebile li tiile. |
| Khokahano ea terata e nepahetse, LCD ha e bontše | 1) matla a betritage tlase ho feta 9V 2) PV voltage e ka tlase ho matla a betritage |
1) Ka kopo sheba molumotage ea betri. Bonyane 9V voltage ho kenya molaoli tshebetsong. 2) Lekola phallo ea PVtage e lokelang ho ba hodimo ho feta dibetri. |
 Ho panya ha sefahleho |
ho fetelatage ge | Sheba hore na betri e na le voltage e phahametse ntlha ea OVD (over-voltage khaoha voltage), ebe o hakolla PV. |
 Ho panya ha sefahleho |
Betri e felile | Ha betri e phahamatage e khutlisetsoa ho kapa ka holimo ho LVR ntlha (tlase voltage kopanya hape voltage), morwalo o tla fola |
 Ho panya ha sefahleho |
Ho chesa ha betri | Mookameli o tla fetola ka bohona tsamaiso e tima. Empa ha mocheso o theoha ho ba ka tlase ho 50 ° C, molaoli o tla tsoela pele. |
| Ho panya ha sefahleho |
Overload kapa Short circuit | Ka kopo, fokotsa palo ea lisebelisoa tsa motlakase kapa hlahloba ka hloko ho hokahanya ha meroalo. |
TLHALOSO:
| Mohlala: | MP3766 |
| Tsamaiso ea lebitso voltage | 12/24VDC, Auto |
| Ho kenya betri voltage fapaneng | 9V-32V |
| Tefiso e lekantsoeng/ea ho ntša chelete | 30A@55°C |
| Max. PV e bulehileng potoloho voltage | 50V |
| Mofuta oa Leshala | Tiisitsoe (Default) / Gel/ E tletse metsi |
| Equalize Charging Voltage^ | Tiisitsoe:14.6V / Gel: Che / Moroallo:14.8V |
| Boost Charging Voltage^ | Tiisitsoe:14.4V / Gel:14.2V / Moroallo:14.6V |
| Float Charging Voltage^ | Tiisitsoe / Gel / Moroallo:13.8V |
| Moqolo o tlasetage Hokela hape Moqtage^ | Tiisitsoe / Gel / Moroallo.12 6V |
| Tiisitsoe / Gel / Moroallo:12.6V | |
| Moqolo o tlasetage Hakolla Moqtage^ | Tiisitsoe / Gel / Moroallo:11.1V |
| Boiketsi ba ho ja | <9.2mA/12V;<11.7mA/24V; <14.5mA/36V;<17mA/48V |
| Coefficient ea mocheso oa mocheso | -3mV/°C/2V (25°C) |
| Charge circuit voltaglerotholi | <0.2W |
| Discharge circuit voltaglerotholi | <0.16V |
| LCD mocheso oa mocheso | -20°C-+70°C |
| Mocheso oa tikoloho ea ho sebetsa | -25 ° Ci-55 ° C (Sehlahisoa se ka sebetsa se sa khaotse ka mojaro o felletseng) |
| Mongobo o amanang | 95%, NC |
| Sebaka se koaletsoeng | IP30 |
| Ho thethefatsa | Common Positive |
| Tlhahiso ea USB | 5VDC/2.4A(Totan |
| Boholo(mm) | 181×100.9×59.8 |
| Saese ya ho hola(mm) | 172x80 |
| Boholo ba lesoba (mm) | 5 |
| Litheminale | 16mm2/6AWG |
| Boima bo kahare | 0.55kg |
^Ka holim'a liparamente ho tsamaiso ea 12V ho 25 ° C, habeli tsamaisong ea 24V.
E ajoa ke:
Electus Kabo Pty. Ltd.
320 Victoria Rd, Rydalmere
NSW 2116 Australia
www.khalebelkn.com.au
E entsoe chaena
Litokomane / Lisebelisoa
 |
POWERTECH MP3766 PWM Solar Charge Controller e nang le LCD Display [pdf] Buka ea Taelo MP3766 PWM Solar Charge Controller with LCD Display, MP3766, PWM Solar Charge Controller with LCD Display, Controller with LCD display, LCD Display, PWM Solar Charge LCD Display |
