KOLINK ObservatoryY Mesh ARGB Midi Tower Case
I-ACESSORY PACK IZIQULATHO
UKUSUSWA KWEPANELI
- Iphaneli yasekhohlo – Tsala ithebhu ukuze uvule iphaneli yeglasi ehonjisiweyo kwaye uphakamise iihenjisi
- Iphaneli yasekunene – Khupha izikrweqe zebhontsi ezibini uze usityibilikise.
- Iphaneli yangaphambili-Fumana umzantsi usikiwe, uzinzise i-chassis ngesandla esinye, kwaye utsale kwi-cutout ngamandla amancinci de iziqeshana zikhulule.
UKUFAKWA KWEBHODI YOMAMA
- Lungelelanisa i-motherboard yakho kunye ne-chassis ukuze ufumane indawo apho i-stand-offs kufuneka ifakwe khona. Nje ukuba yenziwe, susa i-motherboard kwaye uqinise i-stand-offs ngokufanelekileyo.
- Faka ipleyiti yakho yebhodi ye-I/O kwindawo yokusika ngasemva kwetyala.
- Beka i-motherboard yakho kwi-chassis, uqinisekise ukuba amazibuko angasemva angena kwi-plate ye-I / O.
- Sebenzisa izikrufu zebhodi yomama ezinikiweyo ukuncamathisela i-motherboard yakho kwi-chassis.
UKUFAKELWA KOMNIKELO WAMANDLA
- Beka i-PSU ngasemva kwetyala, ngaphakathi kwe-PSU shroud.
- Ukulungelelanisa imingxuma kwaye ukhusele ngezikrufu
IKHADI LEMIZOBO/I-PCI-E UKUFAKELWA KWEKHADI
- Susa ngasemva PCI-E amagqubu slot njengoko kuyimfuneko (kuxhomekeke slot ubukhulu ikhadi lakho)
- Beka ngononophelo kwaye utyibilikise ikhadi lakho le-PCI-E endaweni, emva koko ukhuseleke ngezikrufu zekhadi ezifakiweyo.
- Ikhadi lemizobo linokunyuswa ngokuthe nkqo kusetyenziswa isibiyeli se-GPU esithe nkqo kunye nekhithi yentambo yesikhuphukeli (ethengiswa ngokwahlukeneyo)
2.5″ UKUFAKWA kwe-SDD (R)
Susa isibiyeli ngasemva kwepleyiti yebhodi, ncamathela i-2.5 ″ drive yakho emva koko ujike ubuyisele endaweni.
2.5″ UKUFAKWA kwe-SDD (R)
Beka i-2.5 ″ HDD/SSD kwi/phezu kwesibiyeli seHDD kwaye ujije xa kukho imfuneko.
3.5″ UKUFAKELWA kweHDD
Beka i-3.5″ HDD kwi/phezu kwesibiyeli se-HDD kwaye ujije xa kukho imfuneko
UKUFAKWA KWEFAN OKUPHEZULU
- Susa isihluzo sothuli phezulu kwetyala.
- Lungelelanisa i(izi)feni zakho kwimingxuma yezikrufu kumphezulu wetshisi kwaye ukhuseleke ngezikrufu.
- Buyisela isihluzo sakho sothuli xa sele sikhuselekile.
UKUFAKELWA KWEFANI NGAPHAMBI/NGANGAMVA
Lungelelanisa ifeni yakho kwimingxuma yesikrufu kwi-chassis kwaye ukhuseleke ngezikrufu.
I/O UKUFAKWA KWEPHANSI
- Khangela ngononophelo ukuleyibhelishwa kwekhonkco nganye kwiphaneli ye-I/O ukuchonga umsebenzi wabo.
- I-cross-reference kunye ne-motherboard manual yokubeka indawo apho ucingo ngalunye kufuneka lufakwe khona, emva koko ukhusele enye ngexesha. Nceda uqinisekise ukuba zifakwe kwi-polarity echanekileyo ukuphepha ukungasebenzi okanye umonakalo.
Amaxwebhu / Izibonelelo
 |
KOLINK ObservatoryY Mesh ARGB Midi Tower Case [pdf] Incwadi yokusebenzisa ObservatoryY Mesh ARGB Midi Tower Case, Mesh ARGB Midi Tower Case, Midi Tower Case, Tower Case |
