KOLINK Unity Nexus ARGB Midi Tower Case Incwadi Yomsebenzisi

Iqela lasekhohlo – Khulula izikrweqe zebhontsi ezibini kwaye utyibilikise ipaneli yeglasi ngasemva.
Iphaneli yasekunene- Khulula izikrweqe zebhontsi ezibini kwaye utyibilike.

Iphaneli yangaphambili- Fumana umphantsi osikiweyo, uzinzise i-chassis ngesandla esinye, kwaye utsale kwi-cutout ngamandla amancinci de iziqeshana zikhulule.

3. UKUFAKWA KWEBHODWE YOMAMA

Lungelelanisa i-motherboard yakho kunye ne-chassis ukuze ufumane indawo apho i-stand-offs kufuneka ifakwe khona.
Nje ukuba yenziwe, susa i-motherboard kwaye uqinise i-stand-offs ngokufanelekileyo.

Faka ipleyiti yakho yebhodi ye-I/O kwindawo yokusika ngasemva kwetyala.
Beka i-motherboard yakho kwi-chassis, uqinisekise ukuba amazibuko angasemva angena kwi-plate ye-I / O.

Sebenzisa izikrufu zebhodi yomama ezinikiweyo ukuncamathisela i-motherboard yakho kwi-chassis.

4. UKUFAKELWA KOMNIKELO WAMANDLA

Beka i-PSU ngasemva kwetyala, ngaphakathi kwe-PSU shroud.

Ukulungelelanisa imingxuma kwaye ukhusele ngezikrufu.

5. UKUFAKELWA KWEKHADI LOMZOBO/I-PCI-E

IKHADI LEVIDIYO/I-PCI-E UKUFAKA IKHADI

Susa ngasemva PCI-E amagqubu slot njengoko kuyimfuneko (kuxhomekeke slot ubukhulu ikhadi lakho)
Beka ngononophelo kwaye utyibilikise ikhadi lakho lePCI-E endaweni,
uze ukhuseleke kunye nezikrufu zekhadi zokongeza ezinikezelweyo.

Ukuba unyuswa ngokuthe nkqo, ncamathela isibiyeli esithe nkqo se-GPU kwiqhiya ye-PSU, ikhuselekile
intambo yakho yokunyuka kwe-Kolink PCI-E kuyo (ithengiswa ngokwahlukeneyo) kwaye uqhoboshele intambo kwi-motherboard.

Susa ngasemva PCI-E amagqubu slot njengoko kuyimfuneko, uze ubeke ngononophelo ikhadi lakho PCI-E, slot kwi-PCI-E isikhuphukeli entabeni kwaye ukhuseleke ngezikrufu ezongezelelekileyo zinikezelwe.

6. 2.5″ UKUFAKWA KWESDD (R)

• Susa isibiyeli ngasemva kwi-motherboard plate, ncamathisela i-2.5″ drive yakho uze ujije kwakhona endaweni.

7. 2.5″ UKUFAKWA KWESDD (R)

Beka i-2.5 ″ HDD/SSD kwi/phezu kwesibiyeli se-HDD kwaye ujije xa kukho imfuneko.

8. 3.5″ UKUFAKELWA kweHDD

Beka i-3.5″ HDD kwi/phezu kwesibiyeli se-HDD uze ujije xa kukho imfuneko.

9. UKUFAKELWA KWEFAN OKUPHEZULU

Susa isihluzo sothuli phezulu kwetyala.
Lungelelanisa i(izi)feni zakho kwimingxuma yezikrufu kumphezulu wetshisi kwaye ukhuseleke ngezikrufu.
Buyisela isihluzo sakho sothuli xa sele sikhuselekile.

10. UKUFAKELWA KWEFANI NGAPHAMBI/NGANGAMVA

• Lungelelanisa ifeni yakho kwimingxuma ejijwayo kwi-chassis kwaye uyikhusele ngezikrufu.

11. UKUFAKWA KWERADIATOR YOKUFAKA AMANZI

12. I/O UKUFAKWA KWEPHANSI

Khangela ngononophelo ukuleyibhelishwa kwekhonkco nganye kwiphaneli ye-I/O ukuchonga umsebenzi wabo.
Ireferensi enqamlezileyo kunye nencwadana ye-motherboard yokufumana indawo apho ucingo ngalunye kufuneka lufakwe khona,
uze ukhusele enye ngexesha. Nceda uqinisekise ukuba zifakwe kwi-polarity echanekileyo ukuphepha ukungasebenzi okanye umonakalo.

Funda ngakumbi ngale ncwadana & Khuphela iPDF:

Amaxwebhu / Izibonelelo

KOLINK Unity Nexus ARGB Midi Tower Case [pdf] Incwadi yokusebenzisa
Unity Nexus ARGB Midi Tower Case, Unity Nexus, ARGB Midi Tower Case

Iimbekiselo

Incwadi yokusebenzisa