KOLINK ObservatoryY Mesh ARGB Midi Tower Case
ABUN DA AKE SOYAYYA
CUTAR PANEL
- Ƙungiyar Hagu – Ja shafin don buɗe ginshiƙin gilashin da aka ɗora kuma a ɗaga hinges
- Ƙungiyar Dama - Cire babban yatsan yatsa biyu kuma zamewa.
- Panel na gaba - Nemo yanke ƙasa, daidaita chassis da hannu ɗaya, kuma a cire daga yanke da ɗan ƙarfi har sai an fitar da shirye-shiryen bidiyo.
FASSARAR DARIYA
- Daidaita motherboard ɗinku tare da chassis don gano inda yakamata a shigar da abubuwan tsayawa. Da zarar an gama, cire motherboard ɗin kuma ɗaure tsayawa daidai daidai.
- Saka farantin I/O na mahaifar ku a cikin abin da aka yanke a bayan harka.
- Sanya mahaifar ku a cikin chassis, tabbatar da cewa tashoshin baya sun dace cikin farantin I/O.
- Yi amfani da screws ɗin da aka bayar don haɗa motherboard ɗin ku zuwa chassis.
SHIGA WUTA
- Sanya PSU a baya na karar, a cikin PSU shroud.
- Daidaita ramukan kuma kiyaye tare da sukurori
KATIN KYAUTA/CIYAR KAtin PCI-E
- Cire murfin PCI-E na baya kamar yadda ya cancanta (ya danganta da girman ramin katin ku)
- Sanya a hankali kuma zame katin PCI-E ɗinku a wuri, sannan amintattu tare da kawo sukurori na katin ƙara.
- Hakanan za'a iya saka katin zane a tsaye ta amfani da Bakin GPU na tsaye & kayan kebul na riser (ana siyarwa daban)
2.5 ″ SDD SHIGA (R)
Cire madaidaicin daga baya na farantin motherboard, haɗa tuƙin 2.5 inci sannan ku murƙushe wurin.
2.5 ″ SDD SHIGA (R)
Sanya 2.5 ″ HDD/SSD cikin/kan saman madaidaicin HDD kuma ku dunƙule ciki idan an buƙata.
3.5 ″ HDD SHIGA
Sanya 3.5 ″ HDD cikin/a saman madaidaicin HDD kuma dunƙule ciki idan an buƙata
KYAUTA FAN INSTALLATION
- Cire tacewa kura daga saman akwati.
- Daidaita magoya bayan ku zuwa ramukan dunƙule a saman chassis kuma amintattu da sukurori.
- Sauya tacewar ku da zarar an amintu.
FAN GABA / BAYAN SHIGA
Daidaita fan ɗin ku zuwa ramukan dunƙule akan chassis kuma aminta da sukurori.
I/O PANEL SHIGA
- A hankali bincika lakabin kowane mai haɗawa daga rukunin I/O don gano aikin su.
- Reference tare da littafin uwa na uwa don gano inda ya kamata a sanya kowace waya, sannan a kiyaye daya bayan daya. Da fatan za a tabbatar an shigar da su a daidai polarity don guje wa rashin aiki ko lalacewa.
Takardu / Albarkatu
 |
KOLINK ObservatoryY Mesh ARGB Midi Tower Case [pdf] Manual mai amfani ObservatoryY Mesh ARGB Midi Tower Case, raga ARGB Midi Tower Case, Midi Tower Case, Hasumiyar Case |
