I-DICKSON TM320 iTemperature kunye neDatha yokuFumana iLogger enomboniso

Ndiyaqalisa

Imimiselo yeLogger ehlala ikho

• 1 umzuzu sampumyinge
• Songa xa igcwele
• Isidanga F

Ukuqalisa ngokukhawuleza
Cwangcisa iloga ngokufaka iibhetri.
Faka iDicksonWare™ software version 9.0 okanye ngaphezulu. Ukuba sele usebenzisa iDicksonWare, jonga inguqulelo ngokukhetha “Uncedo/Malunga” kwibar yemenyu. Qhagamshelana neNkonzo yabaThengi ukuba uphuculo luyafuneka.

1. Vula iDicksonWare usebenzisa i icon kwidesktop yakho.
2. Qhagamshela intambo (enikezelwe ngesoftware kaDicksonWare) kwilogi nakwiseri esebenzayo yeCOM okanye izibuko le-USB kwiPC yakho.
3. Cofa iqhosha lokuseta kwiDicksonWare. Kwi-prompt, khetha i-USB okanye i-Serial COM port kwaye ucofe u-Qhubeka. Isithuba sesithuba siya kuvuleka, kwaye zonke iindawo kufuneka zizaliswe ngokuzenzekelayo. Oku kuqinisekisa ukuba iDicksonWare™ iqaphele ilogi. Cinezela i Cima iqhosha ukucima yonke idatha egcinwe ngoku kwilogger. Uphawu lwe Delta I\. phezulu ekhohlo kumboniso ibonisa iyunithi ngoku iloga.

PHAWULA: Ukuba onke amasimi ahlala engenanto, bhekisa ku-“Logger akayi kunxibelelana” kwicandelo leNgxaki lencwadana.

Bonisa Imisebenzi

Iqhosha leMisebenzi

Gcina

Phawula: Olu phawu lusetyenziswa kuphela kumakhadi ememori abonelelwe nguDickson okanye amakhadi eSD angatshixwayo (akhuselekile ngedijithali). Amakhadi angagunyaziswanga angonakalisa iyunithi.
Ukucofa eli qhosha kuya kukhuphela nayiphi na idatha egcinwe kwilogi kwikhadi lememori elisusekayo. "Gcina" iya kuvela kwisibonisi okomzuzwana kwaye ikhawuntara iya kuqalisa ukubala ihle ukusuka kwi-100. Musa ukususa imemori khadi de "Gcina" ingasaboniswa kwaye iyunithi ibonisa ufundo lwangoku.

Phawula: Ukushiya imemori khadi efakwe kwi-logger kuya kunciphisa ubomi bebhetri nge-50%. Ukuba uqaphela “Imposiso” kwisibonisi, nceda ujonge icandelo leNgxaki yale ncwadana.

Ialarm
Ukucofa eli qhosha kuza kuyithulisa i-alam. Ukubamba eli qhosha phantsi malunga nemizuzwana emi-5 kuya kutshintshela phakathi kwe "Fahrenheit" kunye ne "Celsius". (Iiparamitha ze-alam zinokusetwa kuphela kwi-DicksonWare™. Jonga kwincwadi yesoftware yeDicksonWare.)

MINIMAX
Xa ucinezelekile, isiboniso siya kukroba MIN/MAX ufundo lwetshaneli nganye.

Icoca MINIMAX amaxabiso
Ukubamba i-MIN/MAX kunye namaqhosha e-Alarm phantsi ngaxeshanye de kuvele u-“cir” kumboniso, kuya kucima ubuncinci obugciniweyo kunye namaxabiso aphezulu. I-MIN kunye ne-MAX eboniswe ngumgawuli iyakuba ngowona maxabiso aphantsi kunye nawona maninzi arekhodiweyo ukususela oko yagqityelwa ukucocwa.
I-DicksonWare izakubonisa i-MIN kunye ne-MAX amaxabiso kuyo yonke isethi yedatha ekhutshelweyo. Ezi zingohluka kunezo ziboniswe kwiyunithi ngokwayo ukuba amaxabiso MIN/MAX aye acinywa nangaliphi na ixesha ngexesha lokuloga.

Ukuhlohla isiFundo seKhadi leMemori eFleshzayo
Landela imiyalelo ebandakanyiweyo kwisifundi sekhadi.

Amandla
Aba bagawuli basebenza (4) kwiibhetri zeAA. Iadaptha ye-AC ekhethiweyo (inxalenye yenombolo ye-Dickson eyi-R157) ingasetyenziselwa umbane oqhubekayo ngokugcinwa kwebhetri.

Ukutshintshwa kwebhetri

• I-DicksonWare “seta” ibonisa umthamo webhetritage kunye nesilumkiso sebhetri ephantsi xa kufuneka ukutshintshwa.
• Xa utshintsha iibhetri, i-logger ayiyi kuqokelela idatha. Nangona kunjalo, inkumbulo ayiyi kulahleka. Ukuqala sampkwakhona, khuphela idatha uze ucime imemori usebenzisa iDicksonware™.

Ubomi Bebhetri
Ubomi bebhetri obuphakathi ziinyanga ezi-6. Ukufezekisa ubomi obude bebhetri ngexesha lokusebenza, sebenzisa i-s rhoqo kancinciample rate kwaye ukhuphe iyunithi kwi-USB okanye i-serial port xa ungakhupheli idatha.

Isoftware
(Zonke ezi mpawu zinokulungiswa ngokucofa iqhosha elingundoqo elithi Setu.)

Cwangcisa (iqhosha)
Cofa eli qhosha kuqala ukuseka unxibelelwano phakathi kwelogi yakho kunye nesoftware yeDicksonWare™. Ungacelwa ukuba ukhethe indlela yonxibelelwano phakathi kwe-USB okanye Uthotho lwezibuko le-COM. Ungagcina olu seto ukuze ungaphindi ucelwe kwakhona. Olu seto lukwatshintsheka kwi File/Ezikhethwayo/ zoNxibelelwano. Ifestile yokuseta iya kuvela "Yonke imihlaba" egcweleyo. Oku kuqinisekisa ukuba isoftware iqaphele i-logger. Ukuba "Zonke iindawo" zihlala zingenanto kwaye unxibelelwano alusekwanga, bhekisa kwicandelo loNxibelelwano lwale ncwadana.

Ukuchongwa (ithebhu)
Le thebhu ibonelela ngemodeli kunye nenombolo yothotho lwelogger, kunye nokukhetha ukuseta isiko "I-ID yoMsebenzisi" ngokunqakraza i "Setup" esebenzayo ekunene kwe "Id yomsebenzisi" umhlaba. Le thebhu ikwabandakanya umhla wokulinganisa iyunithi, ikhefu lokulinganisa, kunye nomhla wohlengahlengiso lwasefektri.

Sampkancinci (ithebhu)

• Uninzi lwenkqubo yokuseta lwenzeka kweli candelo. Indawo nganye eneqhosha elisebenzayo elithi "Setup" ekunene, yiparameter onokuyenza ngokwezifiso.
• Sample Ithuba Ixelela i-logger yakho ukuba ufuna ukuba ithathe kangaphi kwaye igcine ufundo. Oku kunokwenziwa kwi-10 okanye i-1 yexesha lesibini. Ibhokisi yencoko yababini ekuvumela ukuba utshintshe i sample interval iya kukwazisa ukuba lingakanani ixesha olikhethileyoample rate iya kugubungela. “Ithuba lekhefu lesibini elingaphantsi kweshumi” kufuneka livulelwe ixesha elifunekayoample intervals kunye ngaphantsi kwe 10 ikhefu yesibini.
• Yima okanye Songa xa Ngokugcweleyo Imisela ukuba umgawuli kufuneka enze ntoni xa eqokelele zonke ezinokwenzeka sampLes. Umgawuli unokuyeka kwaye ayeke ukuloga, okanye aqhubeke nokuloga ngokusonga eyona datha intsha kweyona indala.

Phawula: Xa utshintsha useto lwelogger (sample interval, ukumisa/ukusonga, kunye nomhla wokuqalisa kunye nexesha) umgawuli uyakucima ngokuzenzekelayo yonke idatha egciniweyo.

Izitishi (tab)
Ngokucofa iqhosha lokulungisa ngakwesokudla kwexabiso lobushushu okanye lomswakama kwitshaneli nganye, uya kuvunyelwa ukuba "Khubaza" itshaneli engafanelekanga, utshintshe igama letshaneli, usethe kwaye usebenze iiparamitha ze "Alarm".

• I-TM320/325-Dnly itshaneli ye-RH inokukhutshazwa
• I-SM320/325-0itshaneli yesi-2 kuphela inokukhutshazwa

Iialamu (tab)
Iialam zinokusetwa kuphela kwi-DicksonWare™ kweli candelo. Unokwenza okanye ukhubaze ii-alam kunye necandelo le-audio kunye nokuseta i-MIN kunye ne-MAX amaxabiso.

Khuphela (iqhosha)
Ukusuka kwimenyu ephambili, cofa kwiqhosha lokukhuphela ukuze ukhuphe ngokuzenzekelayo yonke idatha engenisiweyo kwigrafu kunye nefomathi yetafile. Usenokukhetha ukuphinda ufumane idatha usebenzisa ikhadi elikhethiweyo leMemori eFlash. Emva kokugcina idatha ekhadini, faka nje ikhadi kumfundi wakho, vula ifolda ethi "LOD", emva koko ucofe kabini kwindawo efanelekileyo "LOD" file eya kuzivula ngokuzenzekelayo iDicksonWare™. Ukuba akunjalo, vula ngesandla iDicksonWare™. Ukusuka kwibar ephezulu ye "Menu", cofa ku "File/Vula” kwaye ukhangele kwidrive efanelekileyo yomfundi wakho. Khetha “LOD” file. Ukucofa kabini kwigrafu emva kokuba ivuliwe kukunika ukufikelela kuzo zonke iimpawu zokwenza igrafu.

Callbratlon
Ukulinganisa "Zero Adjust" kunokwenziwa kule logger. Isoftware yolungelelwaniso lwe-SW400 iyafuneka. Qaphela: Kuyacetyiswa ngamandla ukuba isixhobo se-NIST'd sokuchaneka okuphezulu sisetyenziswe njengomgangatho.
Ukuze ufumane ulungelelwaniso oluchanekileyo, buyisela isixhobo kuDickson ukuze silinganiswe kwilebhu yethu eQinisekisiweyo ye-A2LA. Qhagamshelana neNkonzo yabaThengi ngeNombolo yesiGunyaziso sokuBuyisa ngaphambi kokuba ubuyiselwe ulungelelwaniso.

Kufuneka ukwazi

Izicwangciso zeLogger
Xa utshintsha useto lwelogger (sample interval, sub 10 isithuba sesibini kunye nokuyeka/ukusonga) umgawuli uya kucima ngokuzenzekelayo yonke idatha egciniweyo.

IFahrenheit/Celsius

• I-logger yedatha ayigqibekanga ukuze ungene kwidatha kwi "fahrenheit". Ukutshintsha igrafu view kwiDicksonWare ukusuka kwi “fahrenheit” ukuya ku “celsius”, yiya ku “File/ Okukhethwayo” ukutshintsha ukhetho lobushushu.
• Ukutshintsha isicwangciso sokubonisa, cinezela iqhosha le-Alamu malunga nemizuzwana emi-5. Isiboniso siya kutshintsha phakathi kuka "F" kunye no "C".

Ukulungisa ingxaki

Umboniso Ufundeka PROB
Iimodeli ze-SM320/325 ziya kubonisa "i-Prob" ukuba i-thermocouple ayixhunyiwe.

Ilogi ayizukunxibelelana ngoqhagamshelo lwezibuko le-Serial COM

• Qinisekisa ukuba usebenzisa inguqulo 11 okanye ngaphezulu kweDicksonWare
• Qinisekisa ukuba izibuko le-COM elichanekileyo likhethiwe. Ukusuka kwiscreen esikhulu seDicksonware, cofa kwiLogger, emva koko uNxibelelwano. Ichaphaza elimnyama liza kuvela ecaleni kwezibuko leCOM elikhethiweyo. Kusenokufuneka ukhethe izibuko leCOM eyahlukileyo. Ukuba ufumana umyalezo wemposiso othi "Isixhobo sele sivuliwe", oku kunokuthetha ukuba awunayo izibuko ye-COM ekhethiweyo, kodwa esinye isixhobo, okanye isoftware, inikezelwe. abaqhubi Palm, kuba exampLe, izakubangela le ngxaki, apho kulo mzekelo, izibuko alikho ngokwenene "ifumaneka" kwaye kungafuneka uvale eso sixhobo.
• Kusenokufuneka ufuduse intambo yokukhuphela kwenye izibuko yothotho ngasemva kwePC kwaye mhlawumbi uzame ukutshintsha izibuko leCOM kwakhona kwiDicksonWare™.
• Ukuba unxibelelwano aluzange lusekwe kunye namanyathelo angaphambili, unokufuna ukususa iibhetri kwaye uzame zonke i-COM port kunye nemidibaniso yentambo kwakhona.
• Ukuba kunokwenzeka, zama enye iPC
• Qinisekisa ukuba "i-USB" ayikhangelwanga File/Ezikhethwayo/zoNxibelelwano.

Ilogi ayizukunxibelelana ngoqhagamshelo lwezibuko le-USB

• Qinisekisa ukuba "USB" ikhethwe phantsi File/ Ezikhethwayo/zoNxibelelwano.
• Khipha intambo ye-USB kwaye uvale kwakhona.
• Susa onke amandla kwi-logger. (Oku akuyi kubangela ukuba iyunithi ilahlekelwe yiyo nayiphi na idatha ngaphakathi kwilogi, kodwa kuya kufuneka uqalise ukuloga kwakhona usebenzisa i-DicksonWare™.) Khupha intambo ye-USB, vula kwakhona iloga, uze uphinde uqhagamshele intambo ye-USB.
• Ukuba umgawuli wasetyenziswa kwindawo efumileyo okanye efumileyo, ukuxinana kusenokuba kwenziwe kwiyunithi. Beka iyunithi kwindawo efudumeleyo eyomileyo iiyure ezingama-24. Susa imemori kwaye uzame kwakhona. Aba bagawuli bemithi bayilelwe ukusetyenziswa kwindawo engaxinanisi. Ukuba okusingqongileyo kudala ukujiya, zama ukubeka iyunithi (imodeli yobushushu kuphela) kwingxowa yeplastiki etywiniweyo ukuyikhusela ekujikeni.
• Ukuba kuyenzeka, zama enye iPC, kunye/okanye enye izibuko le-USB kunye/okanye intambo ye-USB.

Impazamo ye-14 yeKhowudi eBonisiweyo-Ayiyi kugcina idatha kwikhadi le-MMC
Le yikhowudi yempazamo eqhelekileyo. Kukho into engalunganga ngekhadi le-MMC (ligcwele okanye lingalungiswanga ngokuchanekileyo) okanye kukho umba wehardware (isinxibelelanisi esibi okanye akukho khadi likhoyo – awukwazi”ukubona naliphi na ikhadi). Zama elinye ikhadi (qiniseka ukuba likhadi le-MMC hayi ikhadi le-MMC Plus). kwaye linikezelwe nguDickson. Ukuze ufumane ulwazi olongezelelweyo malunga nokufomatha ikhadi lakho le-MMC yiya ku: http://www.DicksonData.com/misc/technical_support_model.php

Umboniso ufundeka 0

• Buyisela iibhetri, zisenokuba ziphantsi.
• I-SM420-Iyunithi ifunda -400 xa i-probe ikwindawo ekungekho ndawo ikufutshane kulo bushushu.
• I-RTD probe kwi-SM420 ithambile kakhulu xa ithelekiswa ne-K-TC probe. Zama ukususa nayiphi na i-kinks kwaye ulungelelanise i-probe ngaphandle. Ukuba iyunithi ayiqali ukubonisa ukushisa okuchanekileyo, i-probe inokuthi yonakaliswe ngokusisigxina. Qhagamshelana neNkonzo yabaThengi ukuze ubuyele ukulungiswa.

Iloga ayiloLogi

• Umgawuli uya kuyeka ukuloga ukuba amandla asusiwe. Guqula iibhetri okanye uqhagamshele kumandla e-AC emva koko usebenzisa iDicksonWare. Sula i-logger ukuseta kwakhona kwaye uqale ukuloga.
• Umgawuli uya kuyeka ukuloga ukuba igcwele idatha kwaye ilogi imiselwe ku-“Yima xa igcwele” kwi-DicksonWare™.

Inkxaso yobugcisa eyongezelelweyo inokufumaneka yethu webindawo: http://www.DicksonData.com/info/support.php

Iikhowudi zeemposiso

• Impazamo 1 ………………………………….. Akukho memori khadi
• Impazamo yesi-2 ……………….. Imemori khadi itshixiwe okanye ikhuselwe
• Impazamo 23 …………. Ikhadi lememori lifuna ukuhlengahlengiswa
• Impazamo 66 ……………………………… Ikhadi lememori ligcwele

Iwaranti

• U-Dickson uqinisekisa ukuba olu luhlu lwezixhobo luya kukhululeka kwizinto eziphathekayo kunye nokusebenza phantsi kokusetyenziswa okuqhelekileyo kunye nenkonzo isithuba seenyanga ezilishumi elinesibini emva kokuziswa.
• Esi siqinisekiso asikuquki ulungelelwaniso lwesiqhelo kunye nokutshintshwa kwebhetri.
• NgeeNgcaciso kunye neNkxaso yoBugcisa yiya ku www.DicksonData.com

Inkonzo yefektri kunye noBuyiselo
Qhagamshelana neNkonzo yabaThengi 630.543.3747 yeNombolo yokuGunyazisa ukuBuyisa (RA) ngaphambi kokubuyisela nasiphi na isixhobo. Nceda ube nenombolo yemodeli, inombolo ye-serial kunye ne-PO ilungile ngaphambi kokufowuna.

www.DlcksonData.com
930 South Westwood Avenue

• Addison, IL 60101-4917
• Umnxeba: 630.543.3747
• Ifeksi: 630.543.0498
• I-imeyile: DicksonCSR@DicksonData.com
• www.DicksonData.com 
• 1-800-323-2448
• ifeksi 1-800-676-0498

Amaxwebhu / Izibonelelo

I-DICKSON TM320 iTemperature kunye neDatha yokuFumana iLogger enomboniso [pdf] Isikhokelo somsebenzisi TM320, TM325, TM320 iTemperature kunye neDatha yokuHumidity Logger eneDisplay, TM320, iTemperature kunye nokufuma kweDatha yeLogger eneDisplay, iLogger yeDatha yokufuma enesiboniso, iLogger enomboniso, iDisplay

Iimbekiselo

• Incwadi yokusebenzisa